[admin]

Can anybody give me info. about manufacturers of Air Lock Relay valves (pilot operated) used to achieve stay-put condition in event of air failure?Regards

[admin]

I need to design a two hand no tie down circuit for a class, can anyone help?

[admin]

Does anyone recognise the manufacturer of the following part numbers: – NU1214 * 24or NU0916 * 51/2""

[admin]

I am in the process of putting together a shearing press for a customer. The salesman who services me from my preferred air source suggested an air-oil circuit due to its high force capabilities. He told me that I could generate extremely high

[admin]

I need an air piloted hydraulic valve. I am using sunhydraulics but they are expensive and have stupid lead times.

[admin]

The fittings I'm looking for are 90° elbows, straights, tee's, run tee's, unions. Basically, all the same types that are offered in NPTF. I've had bad experiences with Legris fittings, so I am hesitant to use them. (tubing pulling out because th

[admin]

I am working on a pneumatic hammer to replace the manual hammer we are currently using to pulverize rocks. My company acquires scrap ceramics and chips" them into tumbling stones used in commercial parts tumblers.Originally

[admin]

Very nice …Chapter 1. Industrial Pneumatic Technology.I am sure your local Parker distributor would be more than happy to offer the whole text. Reference Bulletin 0275-B1Call 1-800-C-Parker to locate or check out the web under distributor loca

[admin]

why don't you contact Fimvalvole, it is an italian company specialised in 10mm & 15mm miniature solenoid valves.fimvalvole@fimvalvole.com

[admin]

looking for micro pump which can work continuously 5-10 year.the pressure is about 100kpa,the flow 500cc/min,two port,the dimension is as small as possible.

[admin]

You should always initialize the process using a two hand anti tie down (THATD) as mentioned in an earlier thread. The THATD occupies both operator's hands during the complete process or only initially during the start of the process.The drawback

[admin]

What voltage pump do you need?What country are you in?I will give you a company name near you that makes this kind of pump.

[admin]

Could of been. Have a lot of stuff rattling around up here after many years on the road. I believe I did teach out of the Parker text you mentioned. As you can probably appreciate, it's hard to keep track of the collections in our minds. My si

[admin]

How can I make my valves last a long time? I am using mostly 4 way valves and they don't seem to be lasting as long as they should.

[admin]

has anyone heard of such a thig as a hydraulically piloted 3/2 pneumatic valve.we have a hydraulic pilot signal on an underground coal haul vehicle which we need to use to signal the 3/2 way valve.the hydraulic pressure on pilot would be Autoge

[Author]

Posts