Air Lock Relay
Home | Pneumatics Online › Forums › Air Lock Relay
- This topic has 11 replies, 1 voice, and was last updated 3 years, 10 months ago by admin.
- AuthorPosts
- April 21, 2002 at 12:00 am #20281adminParticipant
Can anybody give me info. about manufacturers of Air Lock Relay valves (pilot operated) used to achieve stay-put condition in event of air failure?Regards
December 10, 2020 at 10:45 am #21810adminParticipantI am assuming you are talking about a cylinder application. There are a number of questions we would have to ask before providing a good answer. How critical is the application? Is there going to be a person under this device or load? What wi
December 10, 2020 at 10:45 am #21811adminParticipanthttp://www.rosscontrols.com/Safety_related.htmSelect the PO Check literature. There are a number of options available regarding how to dump the air when you choose to do so (electrical or manual). These are the 2 and 3 way valves mentioned above
December 10, 2020 at 10:46 am #21812adminParticipantSorry, tech services number is not there, it is 1 888 835-7677.
December 10, 2020 at 10:46 am #21813adminParticipantYou are looking for a PILOT OPERATED STOP VALVE. that can be mounted on the cylender ports.Contact Metalwork pneumatics for more details.Address is:Metal Work S.p.a. – via Segni, 5-7-925062 Concesio (Brescia) – ItalyTel +39 30 218711Fax +39 30 275
December 10, 2020 at 10:46 am #21814adminParticipantThis looks like a standard normally passing 3 way valve that closes when air pressure is turned off. You can use any 2 way or 3 way valve in this application. Metal Work is an Italian company with very little representation in the US. In the US
December 10, 2020 at 10:46 am #21815adminParticipantTo: Mr.Jeromy PatriquinThanks for the remarks on the Metal Work, After all Metal Work is a company & not a trader.You do not know the location of the customer. It looks like customer is not in US.Representation” of company may be big or small
December 10, 2020 at 10:46 am #21816adminParticipantHello.Contact SMC Pneumatics at 800-762-7621Best regards.
December 10, 2020 at 10:46 am #21817adminParticipantThis is turning into an advertising forum. This is meant to be a discussion of industry professionals answering questions for people who have sincere technical questions.The question was asked about air lock relay valves. It has turned into a c”
December 10, 2020 at 10:46 am #21818adminParticipantSITEMA makes a rod clamp they call a Single-acting Safety Catcher” that uses a self-intensifying clamp operating principle that prevents “loads from crashing down at any stage of ascent”.”
December 10, 2020 at 10:46 am #21819adminParticipantSaga Industries Manufacture Single Acting type and Double Acting type AIR LOCK RELAYS. For more information on the product visit http://www.sagaindia.com or write to:SAGA INDUSTRIESKATTOOR – 680 702, THRISSUR, KERALA, INDIA
December 10, 2020 at 10:46 am #21820adminParticipantWe, an ISO 9001 company, manufacture air lock up relays to lock the circuit in case of air failure.YOu are req. to contact us if in case you have the requirement for the same.thanks & regards {DIVYA CONTROL, INDIA}
- AuthorPosts
- You must be logged in to reply to this topic.