has anyone heard of such a thig as a hydraulically piloted 3/2 pneumatic valve.we have a hydraulic pilot signal on an underground coal haul vehicle which we need to use to signal the 3/2 way valve.the hydraulic pressure on pilot would be Autoge
There is no reason you can’t use a standard pilot operated pneumatic valve for this application. You need to make sure the oil is compatable with the seals in the valve and that you are not exceeding the pressure of the valve.In it’s most basic f
NeilIs this valve to actuate at a preset pressure or any time above zero? My firm until last year manufactured a snap acting pneumatic switches that could operate in different input ranges from 3 psi to 400 psi. They worked very well but slow sal
Try this sitewww.doering.comThey have some in 2-way and 3-way but say the 3-way is only for air. Worth asking about your application.