[admin]

Hey,Me and someothers need help identifying this elbow:http://www.gbprops.com/elbow.jpgIt is very vital that we find out what this peticular elbow is exactly. A different one just won't do. It is Circa 1983, and is believe to be made by Legris.

[admin]

hello from Israelwe are looking for the best system to monitor in real time the airflow in pipe 2-3 pressure up to 10 Bar we need the total meter toothanks…Ofer"

[admin]

I would like to post this question to all pneumatic experts, marketers, users, sales persons,owners.Do you find this industry becoming so saturated with products that there is very little ethics, money,loyalty in the industry. I have been in th

[admin]

We have air motors.

[admin]

where should we install the refrigerated dryer…before the air tank or after the air tank. Will the location of the dryer whether before or after the air tank depends on the compressor used (reciprocating comp…dryer after the tank, screw comp

[admin]

Does anyone know who sells high press reg in Australia300 bar inlet.200 bar outlet.3/4 of 1/2" .Natural Gas .Ambient Temp.Non Rel.Thank you in advance."

[admin]

Thanks to everyone for answering my question. I have a good understanding of why, so now I can work out how.Thanks again.

[admin]

i need a very fast triggering valve for my gas actuated launcher system. The longest permissible valve opening time for this application is in microseconds but i do not know what type of valve ( thats available in the market ) suitable for this

[admin]

I am searching for a direct replacement of the following Martonair item: Typ: SPD/W12/6123 Serie: SPWG/1399 Betriebsdruck: 3-10bar

[admin]

We have a need for a pressure regulator with an operating range of 5psi to 10psi. We need it to have an adjustable outlet of 2psi to 5psi and a maximum diameter of 1.0 inch.We also need a expandable pressure bladder (air pressure accumulator) t

[admin]

We have a need for a miniature pressure regulator with an operating range of 5psi to 10psi with an adjustable outlet of 2psi to 5psi. It also has to have a maximum outside diameter of 1.0 inch.We are also looking for an expandable pressure blad

[admin]

Anyone know of a source for Fu Sheng (Tiawan) compressor pump parts? They are the largest manufacturer there, but I cannot find anyone who sells parts, even on the Internet.Any help would be appreciated.John Phillipsjohncphillips@mindspring.com

[admin]

Try Air-trol for the regulator. I am not sure who has the bladder. If you are looking just for a small tank for timing (20 psi Max) for example, PVC pipe with end caps and a 1/8 inch fitting threaded in to the end works well. Norgren made a real n

[admin]

Look at the following address for SMC series PF2A flow switch to 2 pipe and 15000 liters per minute sensing range;http://www.smcworld.com/2002/index3_e.htmGood luck!"

[admin]

I guess this is somewhat elementary. I am setting up a pneumatic haloween special effect for my kids. I am installing a cylinder in a drum and would like to have it pop up when kids ring the door bell. The problem is I don't know what I need

[Author]

Posts