sstore sstore

ANVER

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 2,001 total)
  • Author
    Posts
  • in reply to: Cooling 02 #20092
    admin
    Participant

    Novice here: What's the smallest system for quickly cooling 02 to about 2-4 Degrees C? The flow rate of 02 is about 5 liters/minute. Thanks.

    in reply to: Positioners to suit 8" BORE cylinder #20094
    admin
    Participant

    I need help please on a positioner to suit or actually mount on to a NFPA Cylinder.Can anyone assist?

    in reply to: Micro or miniture solenoid valves #20100
    admin
    Participant

    I am looking for 5/2 miniture or micro solenoid valve.It needs to run at 5-6 Volts, be rated at between 0.5-1 Watt power consumption, and be suitable for 100-110 psi operating pressure.Base mounted is prefered.Size is the main pre-requisite for

    in reply to: Telescoping pneumatic cylinder #20109
    admin
    Participant

    HelloDoes anyone know of a manufacturer of telescoping pneumatic cylinders?I am looking for one with the following:1 bore or larger if required.100 psi max pressure

    in reply to: (job) Outside Sales – NC or VA #20112
    admin
    Participant

    A client of mine, headquartered in California, is seeking two outside sales people for their Charlotte, NC branch. Here is more information concerning the company and the positions:They have been in business since 1952 and have more than 250 em

    in reply to: Micro or miniture solenoid valves #20101
    admin
    Participant

    Check out Numatics web site:www.numatics.comTheir 2002 Series valve or their Miniature Pneumatics Group can help you. Good Luck

    in reply to: Inline vacuum filters #20114
    admin
    Participant

    In need of 1/4-1/2" G port vacuum filters with sight glass. Must be readily available in Australasia. Sorry no SMC or Festo -> end-user mandates. Any suggestions."

    in reply to: Inline vacuum filters #20115
    admin
    Participant

    Try PIAB they have a good assortment.

    in reply to: Looking for agents #20071
    admin
    Participant

    Hello.Please e-mail me at airman_sam@hotmail.comI am an engineering consultant and I design pneumatic systems. I would like for you to mail me catalogs for your product.Once you e-mail me, I will provide my mailing address.Best regards.

    in reply to: Micro or miniture solenoid valves #20102
    admin
    Participant

    Please contact SMC at 800-762-7621.Aske about the VQ1000 series valves or the SY3000 series valve to meet your above requirements.Best regards.

    in reply to: Telescoping pneumatic cylinder #20110
    admin
    Participant

    Ergo-Help, Inc.Ph: 847-593-0722Fx: 847-593-0797E-mail: ergo-help@linkom.netWeb: http://www.ergo-help.thomasregister.comRegards.

    in reply to: proportional flow valve #20118
    admin
    Participant

    Looking for precise control of flow in oxygen from 1-120 LPM (25psi input)with fast response, low power consumption, and small package. Anybody have any ideas?

    in reply to: Who makes the best valve? #20123
    admin
    Participant

    There is a discussion about who makes the best pneumatic valves.

    in reply to: Norgren take over #20134
    admin
    Participant

    I have heard rumors that Norgren International is for sale again.The sale is being held up because of the Herion relationship.Can anyone confirm this is true or what the story is.One bidder I heard is Parker Hannifen?.

    in reply to: Norgren take over #20135
    admin
    Participant

    I have heard of this from a Parker associate as well.It will make them very strong in the pneumatic sector

Viewing 15 posts - 61 through 75 (of 2,001 total)