Micro or miniture solenoid valves

ANVER

Home Forums Micro or miniture solenoid valves

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #20100
    admin
    Keymaster

    I am looking for 5/2 miniture or micro solenoid valve.It needs to run at 5-6 Volts, be rated at between 0.5-1 Watt power consumption, and be suitable for 100-110 psi operating pressure.Base mounted is prefered.Size is the main pre-requisite for

    #21959
    admin
    Keymaster

    Check out Numatics web site:www.numatics.comTheir 2002 Series valve or their Miniature Pneumatics Group can help you. Good Luck

    #21960
    admin
    Keymaster

    Please contact SMC at 800-762-7621.Aske about the VQ1000 series valves or the SY3000 series valve to meet your above requirements.Best regards.

    #21961
    admin
    Keymaster

    Please check with Koganei of japan

    #21962
    admin
    Keymaster

    you may want to look at http://www.arozone.com

    #21963
    admin
    Keymaster

    why don’t you contact Fimvalvole, it is an italian company specialised in 10mm & 15mm miniature solenoid valves.fimvalvole@fimvalvole.com

    #21964
    admin
    Keymaster

    for the smallest valves check http//www.pneutronics.com

    #21967
    admin
    Keymaster

    i’ve been looking for the same thing. found it at festo pneumatics

    #21968
    admin
    Keymaster

    If you need numatics please contact me http://www.fluid-controls.cn/numaticsŦÂüµÙ¿Ë.html

    #21969
    admin
    Keymaster

    Dear Mr Wood I would recommend that you speak with CKD Pneumatics who manufacture a very small 7mm wide solenoid valve that would be ideal for your application. http://www.ckd.co.jp/english/company/introduction/mproduct/index.htm They also have sales divisions in the US market place

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.