seltecuae

ANVER

Forum Replies Created

Viewing 15 posts - 1,066 through 1,080 (of 2,001 total)
  • Author
    Posts
  • in reply to: hose removal tools? #20994
    admin
    Participant

    try Griffiths Components in Victoria Australia.

    in reply to: cylinder tipe SM 950/D-300 #20995
    admin
    Participant

    Contact Norgren at http://www.norgren.com

    in reply to: cylinder tipe SM 950/D-300 #20996
    admin
    Participant

    For pneumatics also check out http://www.festo.com

    in reply to: cylinder tipe SM 950/D-300 #20997
    admin
    Participant

    If you don’t mind l ]]ooking at a Parker cylinder as a suitable substitute. Please give me a call on my cell at 416-951-7137 or at my office at 416-447-6471

    in reply to: cylinder tipe SM 950/D-300 #20998
    admin
    Participant

    This is a Norgren cylinder, specific to them. Same time and effort changing mounting details etc. and check out their up dated version of this cylinder, the RM/950/300, before looking elsewhere. http://www.norgren.com

    in reply to: cylinder tipe SM 950/D-300 #20999
    admin
    Participant

    Martonair is now IMI Norgren. Please contact Norgren dealer near your location or visit http://www.norgren.com

    in reply to: oversize push to conect fittings #21000
    admin
    Participant

    Please give me a call. I have compression alignment fittings in both straights and 90 deg. angle that can do the job. Paul Boswell 416-951-7137 cell

    in reply to: 2-Way Valves #21001
    admin
    Participant

    You can use a air actuated ball valve. We have a line that would be capable of holding pressure in both directions. Fluidaire Company 502-339-8700

    in reply to: 2-Way Valves #21002
    admin
    Participant

    You can use a Spool type valve to stop flow both directions. However, many Spool type valves have some bypass when closed so they stop flow but not completely. You could look at MAC or NuMatics spool types and even use a 3 or 4-way and plug the extra ports if there is no 2-way available.

    in reply to: 2-Way Valves #21003
    admin
    Participant

    Try the Norgren valve M/1338 or M/738 2/2 pilot/spring poppet valves. They are 1/2″ & 3/4″ BSP ported valves respectively. Remember to pipe them for oil from port 2 to 1 (in reverse).

    in reply to: 2-Way Valves #21004
    admin
    Participant

    2WC Series Normal Open General Solenoid Valve Tecnology Parameter Operating Medium: Air,Water,Oil,Gas Motion Pattern: Direct Drive Type Type: Diaphragm Type,Normal Open Operation Fluid Viscosity: 20CS Below Pressure Difference: 0~1.0Mpa Working Pressure: 1.0Mpa Medium Temperature: -5~80¡æ Install Method: Wantonly Voltage: AC380V£¬220V£¬110V£¬36V£¬24V,DC220V£¬110V£¬36V£¬24V£¬12V Port Size: G1/2¡±, G3/4¡±, G1¡±, G11/4¡±, G11/2¡±, G2¡±

    in reply to: bnc-3p10 #21005
    admin
    Participant

    This is a Compair part number for a logic base. Try a Compair or Watts distributor.

    in reply to: bnc-3p10 #21006
    admin
    Participant

    IPEC automation phone# 905-738-6688 or 1-866-665-7877 fax 905-738-6251

    in reply to: solenoid valve #21007
    admin
    Participant

    check out norgren they are own herion

    in reply to: qutation #21008
    admin
    Participant

    Talk to Norgren norgren own herion

Viewing 15 posts - 1,066 through 1,080 (of 2,001 total)