2-Way Valves

ANVER

Home | Pneumatics Online Forums 2-Way Valves

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #19848
    admin
    Participant

    Would anybody know of a general purpose 2-way valve that will stop flow in both directions? It will need to stop a light oil with pressure of up to 80psi.

    #21001
    admin
    Participant

    You can use a air actuated ball valve. We have a line that would be capable of holding pressure in both directions. Fluidaire Company 502-339-8700

    #21002
    admin
    Participant

    You can use a Spool type valve to stop flow both directions. However, many Spool type valves have some bypass when closed so they stop flow but not completely. You could look at MAC or NuMatics spool types and even use a 3 or 4-way and plug the extra ports if there is no 2-way available.

    #21003
    admin
    Participant

    Try the Norgren valve M/1338 or M/738 2/2 pilot/spring poppet valves. They are 1/2″ & 3/4″ BSP ported valves respectively. Remember to pipe them for oil from port 2 to 1 (in reverse).

    #21004
    admin
    Participant

    2WC Series Normal Open General Solenoid Valve Tecnology Parameter Operating Medium: Air,Water,Oil,Gas Motion Pattern: Direct Drive Type Type: Diaphragm Type,Normal Open Operation Fluid Viscosity: 20CS Below Pressure Difference: 0~1.0Mpa Working Pressure: 1.0Mpa Medium Temperature: -5~80¡æ Install Method: Wantonly Voltage: AC380V£¬220V£¬110V£¬36V£¬24V,DC220V£¬110V£¬36V£¬24V£¬12V Port Size: G1/2¡±, G3/4¡±, G1¡±, G11/4¡±, G11/2¡±, G2¡±

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.