[admin]

I posted a message earlier about a product line my distributor introduced to me. It was a product that looked a lot like SMC. I requested and received a sample about last week. I started comparing it to my current SMC product I use. With the

[admin]

Sehr geehrte Frau Cherkessova,ich habe Interesse an Ihren Produkten. Bitte um Ihre Telefonnummer.

[admin]

I came across this one recently – this stuff looks really interesting, especially for those looking for valves with speed and dynamic range.http://www.afsglobal.com/pneumaticvalves/

[admin]

I am interested in a cylinder with a throw of 1 inch, 10-60psi, but I need to built custom end caps. Am I going to be better off starting from scratch and building the entire cylinder or should I find an existing cylinder, pop the end caps and

[admin]

I have been wondering and am interested to know how one can deduce the response time of a solenoid valve. In case of a 5/2 way pneumatic solenoid valve the response time of the valve would be the response time of the pilot valve and the time tak

[admin]

I am looking for a a very small, durable and cheap pressure sensor that could be placed into a rubber or plastic block about 10mm thick whcih would simply record pressure or impacts of 20-100kg. All I need is it to record impact or no impact.

[admin]

http://www.rosscontrols.com/vresp.htmThe quick answer is that the reponse is determined by testing. How long to fill a specific volume with a given supply pressure? This will give an al most straight line curve (x + by = a) as the pressure build

[admin]

Does anyone know of a miniature non-relieving regulator capable of operating to at least 200psi? (operating pressure, not supply pressure) 1/8NPT preferable. So far, Monnier is the only mfr. I have been able to find. Thank you.

[admin]

Any idea of the manufacturers name?

[admin]

In response to your very unprofeshional comments my company are very organised and profeshonel. We have the highest standard of phone service on the planot, with or without part numbers, THANK YOU VERY MUCHE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[admin]

i've been looking for the same thing. found it at festo pneumatics

[admin]

I want to slightly pressurize (~2 PSI) two soft 3/8 hoses to the same pressure, and have them independently keep pressure. Thus:(a) need common (source) relief valve just above desired pressure(b) need check valves on each so when the source pre

[admin]

Why not use a simple contact closure. On one side of an oil filled diaphragm you could have foil. You could also have foil on the bottom. If there is impact they will open and you have a signal. KISS.

[admin]

What applications would require valve with high speed and dynamic range?

[admin]

FLUIDAIRE CAN PROVIDE THIS CYLINDER. WE NEED MORE DETAILS.COST IS APPROX. $430CALL 502-339-8700

[Author]

Posts