[admin]

I have a supply of numatics parts in stock and are willing to sell them. if anyone is interested please call me at 800-697-9311. ask for Doug.

[admin]

There is no reason you can’t use a standard pilot operated pneumatic valve for this application. You need to make sure the oil is compatable with the seals in the valve and that you are not exceeding the pressure of the valve.In it’s most basic f

[admin]

NeilIs this valve to actuate at a preset pressure or any time above zero? My firm until last year manufactured a snap acting pneumatic switches that could operate in different input ranges from 3 psi to 400 psi. They worked very well but slow sal

[admin]

Try this sitewww.doering.comThey have some in 2-way and 3-way but say the 3-way is only for air. Worth asking about your application.

[admin]

IMI Norgren do a full range of Co2 regulators.

[admin]

contact me ..i have them brand new for 40.00

[admin]

That is a BIG question. Unfortunately there are many answers. Most of the answers are dependent on your application. There are some questions which need to be answered:What is the application?What are the environmental conditions?The number an

[admin]

Dear Sir,I would start by looking at your air supply. If you don’t feed it high quality fuel (clean dry air) don’t expect good performance. Start at compressor at work forward.

[admin]

What voltage pump do you need?What country are you in?I will give you a company name near you that makes this kind of pump.

[admin]

You should always initialize the process using a two hand anti tie down (THATD) as mentioned in an earlier thread. The THATD occupies both operator’s hands during the complete process or only initially during the start of the process.The drawback

[admin]

Try Compair when it comes to jackhammers

[admin]

Wayne’Try http://www.doering.comBud Trinkel

[admin]

What valve are you using: cartridge or manifold? What are you using it for? What is expensive?

[admin]

try http://www.haskel.com , they have these valves

[admin]

Dave;A high pressure Air-Oil circuit normally uses air-oil tanks for fast approach and retract at low (air) pressure and an Air-Oil Intensifier for the high pressure work stroke. Air pressure forces oil from the air-oil tanks into the cylinder fo

[Author]

Posts