admin
Forum Replies Created
- AuthorPosts
adminParticipantplease inform me about your product (high pressure regultor)
adminParticipantI search for a at least 230 bar inlet and 230 bar outlet pressure. And also i want to change manually the outlet pressure. Could you help me?
adminParticipantContact hundsdorfer-1@t-online.de ROSS Europa has a line of high pressure spring loaded manual adjust regulators to 340 bar.
adminParticipantThe flow capacity of air equipment are rated either in ANR, FAD, SCFM, Nl/min, etc.ANR condition is in 1.01325 barA, 20degC and RH 65%. Nl/min condition is at 1.01325 BarA, O deg C,0% RHSCFM condition id in 14.4 psia, 80 deg F and 60% RHSo, if
adminParticipantCatalogues required on the following addressSTAR CORPORATION135 Railway Road, Faisalabad, PAKISTANTel 00 92 41 600705
adminParticipantWell, I’m not sure what you’re asking. But I’m willing to reply. JointAir is a wholesale supplier. I started the company on the basis that customers building mature products need a second tier” of products which can be easily installed on thei”
adminParticipantI hear what you are saying ,its part of globalisation.Parker are doing an excellent job of it and in a few years there will be 4-5 big pneumatic manufacturers world wide.They will go to countries where labor is cheap and buy small mnf plants to cu
adminParticipantI hate to agree with you MC, but I do. Your observations are universal by our estimations. Our industry has reached a level of maturity where the manufacturer’s interests are overiding those of the customer, and the distributors. In speaking wi
adminParticipantURGENT REQUIREMENTS OF MAXAM PNEUMATIC CYLINDERS & SEAL KITS PLEASE SPECIFY INDIAN / ASIAn DISTRIBUTORS OF MAXAM PNEUMATICS UK IT’S VERY URGENT THANKS & REGARDSDILEEP SHIRSAT c.e.o.FLUID POWER CAREKorba (CG) Indiafpc_korba@sancharnet.influidpowerc
adminParticipantLook at the following address for SMC series PF2A flow switch to 2 pipe and 15000 liters per minute sensing range;http://www.smcworld.com/2002/index3_e.htmGood luck!”
adminParticipantFrom what I can see the one marked Correct Elbow” is definitely Legris but one of the original version. The newer part is called Second Generation in their catalog and there is even a Third Generation available. The “3” and “4” are probably mold”
adminParticipantI don’t know Bud. The old Legris fittings from the Rochester, NY days were gray. I don’t recognize that mark either. I pulled out my old samples of their generation 1 fittings and they don’t match what I have.
adminParticipantHello.I have old Legris literature and what you have is a Legirs 1st generation push connect fitting.The body is gray and the collet is brass that requires a screwdriver to engage to release the tubing.Measure the OD (outer diameter) of your tubin
adminParticipantThese guys are building some pretty neat equipment. If you check their website http://www.gbprops.com, you can see what they are building. I’m not sure what they do exactly, but they are replicas of the Ghost Busters backpacks.Because they are building
adminParticipantSay thanks for your help everyone! Yes, there can be no alternative for these, they have to be the grey ones from the 1980’s. It is still not known if these are actually legris, because several people say they aren’t. But just so you don’t get con
- AuthorPosts
