Velocity fuses

ANVER

Home Forums Velocity fuses

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #20751
    admin
    Keymaster

    I can't seem to find a source for pneumatic velocity fuses, 3/8 to 3/4 inch; any ideas? The goal here is to prevent hose whip" should there be a failure at terminal end.Thanks."

    #21464
    admin
    Keymaster

    http://www.rosscontrols.com/NewHOZEFUZE.htmAbove is the link to the web page. It contains a link to the catalog page with sizing information.You can find your local distributor on http://www.rosscontrols.com/distneta.htm

    #21465
    admin
    Keymaster

    Thank you, sir. I will check it out.

    #21466
    admin
    Keymaster

    Try Norgren and their range of ‘Air Fuses’. http://www.norgren.com

    #21467
    admin
    Keymaster

    I looked at the Norgren valves also; good coverage. Thanks for the help.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.