seltecuae

ANVER

Forum Replies Created

Viewing 15 posts - 1,216 through 1,230 (of 2,001 total)
  • Author
    Posts
  • in reply to: Ceramic iso valves #21170
    admin
    Participant

    Parker recently re-introduced their ceramic valves in the US, and now stock them locally. Lead times are short, and there should be a knowledgable distributor or factory rep in your area to better service you. Please call 269-629-5000 for assist

    in reply to: 3-way valve for vacuum application #21171
    admin
    Participant

    Any small 3-way spool type valve, single pilot operated, spring return would work for your application. Use a 3-way Palm Button air valve to pilot it for a simple setup.Realize the flow of an air valve using vacuum will be much lower than advertis

    in reply to: 3-way valve for vacuum application #21172
    admin
    Participant

    What type of flow requirement do you have? Do you want a manual valve, or solenoid operated? Parker has an extensive vacuum line, as well as valves and air preparation.www.parker.com/pneumatic

    in reply to: ATEX #21173
    admin
    Participant
    in reply to: ATEX #21174
    admin
    Participant
    in reply to: wira fittings #21175
    admin
    Participant

    I would like to know the adress of the company who manufacture the wira fittings in order to trade in spainthanks and best regards

    in reply to: Auto Switch to Backup Air Supply #21176
    admin
    Participant

    Don;An Air Line Regulator with a check valve at its outlet would work. Set the regulator for 80 PSI and install the check valve with free flow to the system you want to keep at a minimum pressure. Anytime your main system drops below 80 PSI the re

    in reply to: 3-Way Air Valve + Air Line Loss #21177
    admin
    Participant

    We have three way valves up to 2-1/2 http://www.rosscontrols.com/PDFs/27Sol.pdfWe have also made a 3″ Lockout valve. It contains two parallel 2″ valves in one assembly with the ability to lock it out for OSHA 1910.147 requirements. I can email”

    in reply to: 3-Way Air Valve + Air Line Loss #21178
    admin
    Participant

    ALKON also has a line of valves up to 2-1/2 NPT in the Bazooka Series.www.alkoncorp.com419-333-7000Best regards.”

    in reply to: 3-Way Air Valve + Air Line Loss #21179
    admin
    Participant

    A cheaper method might be to use an actuated ball valve. 3 L ported ball valves are available with either electrical (slow… typically 12-20 secs) or with pneumatic actuation (reaction of around 1 sec) via either a double acting or single actin”

    in reply to: Air Valve #21180
    admin
    Participant

    I need a 3 or 2 1/2″ 3-Way Ball Valve. Brass body

    in reply to: Air Valve #21181
    admin
    Participant

    I need a 3 or 2 1/2″ 3-Way Ball Valve. Brass body

    in reply to: crouzet solenoid valves #21182
    admin
    Participant
    in reply to: Need a low pressure switch/relay, non-electric #21183
    admin
    Participant

    Most of the manufacturers of Air LOgic controls have switching valves in the pressure range you need. They would not hav much flow but could pilot a large 2 or 3-way for flow.Try Crouzet, ARO or Parker/Telemechanique. I had no luck on the web so

    in reply to: Need a low pressure switch/relay, non-electric #21184
    admin
    Participant

    Hi Bart,There is a company called AirTrol Components that may offer what you need. They offer an air to air pressure switch, which, as Bud suggested could be used to pilot a larger valve. They offer both Normally-Passing, (N.O), and Normally Non-

Viewing 15 posts - 1,216 through 1,230 (of 2,001 total)