3-way valve for vacuum application

ANVER

Home | Pneumatics Online › Forums › 3-way valve for vacuum application

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 31, 2004 at 12:00 am #19607
    admin
    Participant

    We are looking for a small (3×2"max)3-way valve that would allow us to manually switch a vacuum source from one inlet to another. Ideally it would be spring loaded so we could normally operate off of ports 1 & 2 then when a button is depressed"

    November 29, 2020 at 4:57 pm #21171
    admin
    Participant

    Any small 3-way spool type valve, single pilot operated, spring return would work for your application. Use a 3-way Palm Button air valve to pilot it for a simple setup.Realize the flow of an air valve using vacuum will be much lower than advertis

    November 29, 2020 at 4:57 pm #21172
    admin
    Participant

    What type of flow requirement do you have? Do you want a manual valve, or solenoid operated? Parker has an extensive vacuum line, as well as valves and air preparation.www.parker.com/pneumatic

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.