[admin]

Problem: 2-Way Air Suspension on a vehicle (using Air Cylinders) leans to one side since the vehicle is heavier on that side.Suggested Solution: Create a constant pressure differential between the two cylinders so that one is always a fixed PS

[admin]

I am working on a theatrical production as a technical director and the director need an arrow fired 16' straight down and land point in the stage during the climax. Any thoughts on how to use pneumatics into a blow gun" rather than a crossbow"

[admin]

I AM LOOKING FOR THE FORMULA TO CALCULATE THE SCFM OR ASFM IN A SMALL ID TUBE AT A REGULATED SET PRESSURE. OUTER TUBE = 0.25 OD X 0.175 ID WITH THE AREA OF AN OD OF 0.125 REMOVED. THIS IS A TUBE WITHIN A TUBE.

[admin]

I'm in search of parts to support my Posiden P-200 scuba compressor. It is the model made in 1984 and I need a connecting rod for the second stage cylinder. I hear this was a rather common weakness in this model. I'd even consider buyind a dead"

[admin]

Try Siemag Industries url: http://www.siemag.net; E-mail address: siemag@vsnl.com, Siemag Industries, R.K. Industry house, Walbhat Road, Goregaon East, Mumbai 400 063. India.

[admin]

You could use a blow gun to do the same thing. They use similar things to launch shirts into crowds at professional sporting events. Search for air cannons online and you'll find some things.The advantage of air is you can control the pressure a

[admin]

Get in contact with Mr. Åke Pettersson at Parker. His direct phone: +46 321 – 67 57 15.

[admin]

Is there any manufacturer produce pressure switch of compressure similiar to FURNAS?Please tell me, much appreciated.

[admin]

Require 2 off Compair Linear controllers. These were in the last Compair catalogue with a part number starting with C or CT. May also be called Climax Pronunced CLEMAX" Any help would be appreciated. Parker agents here can not help

[admin]

Try http://www.layher-gmbh.de

[admin]

Was that a pneumatic controller similar to the S660 and M660?Wal.

[admin]

Dear SirWe are looking for a Conectron motor for our Gas Burner Control but unfortunately I dont have any detail about this motor as all the number are wipped off if you give me your FAX NUMBER i wiil be able to send a drawing of this motor.Thanks

[admin]

Half of our sales volume is currently coming from the sales of pneumatic components and air treatment components: FRL's, separators, etc. Unfortunately we have been selling a 'hodge-podge' of brands, usually driven by our clients' requests rathe

[admin]

Norgren do a differential pressure regulator, it is a special product and not catalogued. Speak to their technical people about a similar regulator to their 11-111-998, this one is pilot operated. Try http://www.norgren.com to locate your nearest techn

[admin]

Try the SMC version series IP200Part numbers C92PDB followed by bore and stroke

[Author]

Posts