How to Create Differential Pressure?

ANVER

Home | Pneumatics Online › Forums › How to Create Differential Pressure?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 20, 2003 at 12:00 am #19437
    admin
    Participant

    Problem: 2-Way Air Suspension on a vehicle (using Air Cylinders) leans to one side since the vehicle is heavier on that side.Suggested Solution: Create a constant pressure differential between the two cylinders so that one is always a fixed PS

    November 30, 2020 at 4:53 pm #21222
    admin
    Participant

    Norgren do a differential pressure regulator, it is a special product and not catalogued. Speak to their technical people about a similar regulator to their 11-111-998, this one is pilot operated. Try http://www.norgren.com to locate your nearest techn

    November 30, 2020 at 4:53 pm #21223
    admin
    Participant

    Use an opposing cylinder on the light side with constant air pressure pushing against that cylinder. Use an expansion tank foor this opposing cylinder to keep pressure changes to a minimum as the cylinder is pushed back.Bud

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.