[admin]

For a competition i need to build a small robot. I was looking into pneumatics and was wondering if anyone had any information on small compressors. Thanks…please email if you do…dcufan9@hotmail.com

[admin]

OK, I will apologize in advance for asking what will probably be a dumb question. I am designing a 2 cylinder system and am having trouble figuring out what type (3way, 4way, etc) of valves to use. I have a basic understanding of the 2 and 3 w

[admin]

Dean, Contact me and I will help you out. I am a Pneumatic Controls Designer and would like to help you out with this. My work number is 248-377-4950 x188

[admin]

Has anyone ever heard of a manufacturer of a vacuum quick disconnect by the name of Andrews?My customer gave me the name and the part number is 200F-DVC. He says it has an approximate I.D.=2 inches. Can anyone help?Thanks

[admin]

Try This Company Andrews Tool Co. P.O. Box 121464 Arlington, TX 76012 USA

[admin]

We are a manufacturing company.our products *pneumatic rotary actuator double and single type.*solenoid valves*pneumatic operated angle seat piston valvessee more http://www.sms-tork.com.trwe are looking for distributorRegardsSMSE.KAYA

[admin]

Hello, Thank you for having interest in our company. You will find enclosed our product range. The firm Pnevmatika-Serta is a producer of pneumatic and hydraulic cylinders.Pneumatic cylinders ISO 6431Special pneumatic cylindersStandard hydraulic

[admin]

I require assistance please on pneumatic logic timers.I see you can get normally closed and normally open ones.Question is -say a norm.closed. once you set the time delay does the timer provide an output signal for the duration of the set time?D

[admin]

Shaun;You need a Normally Open (Normally Passing)(Time Off Delay)timer to do what I think you want to do. You would give it a signal to the timer port and the inlet port at the same time (From the same signal). The signal would immediately pass th

[admin]

You can get both normally open and normally closed timers from KV Ltd.www.kvglobal.com

[admin]

With the products I am familiar with, you can use a 2/2 normally closed valve with a time in/out sequence adaptor. You would have air to the inlet of the valve. When you provided the pilot signal, the time in adaptor would delay for the preset t

[admin]

This is to inform you that the news story which you recently submitted to Manufacturingtalk:Lubricator keeps watch on pneumatic system health…is now on the Manufacturingtalk website. If you wish to circulate this information to colleagues or c

[admin]

If in Australia contact Compair 1800 634 077tel.Ask for pneumatic sales.

[admin]

Looking for a regulator (4 total needed) for the following application. Did some investigation a few months ago without good resultsEnvironment: Intermittent sub sea (1 hour at 110’ sea water), 8x a yearInlet: Decaying pressure source (a

[admin]

Hello, I am looking for distributor or replacment part for PWRHB1489 (Telemecanique)Thanks in advice

[Author]

Posts