Air filtration assistance please

ANVER

Home | Pneumatics Online › Forums › Air filtration assistance please

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 5, 2003 at 12:00 am #20701
    admin
    Participant

    I have an unusual application where a customer is using 33cfm compressor and strangely enough piping 1/8 pipe output into a 11/2" filter coelesting set

    December 5, 2020 at 12:02 pm #21510
    admin
    Participant

    Clair,Most filters are design with a flow range in mind. A typical general purpose filter has a louver which spins the air around the bowl using centrifugal force to pull” large particulate and water out of the air. If you do not have enough fl”

    December 5, 2020 at 12:02 pm #21511
    admin
    Participant

    Clair, as the air exits the 1/8 tubing into the 1 1/2″ filter

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.