P.O. Check valves

ANVER

Home | Pneumatics Online › Forums › P.O. Check valves

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 3, 2003 at 12:00 am #19403
    admin
    Participant

    Does anyone know other manufacturers of P.O. check's other than Ross and Aladco?

    November 30, 2020 at 5:00 pm #21240
    admin
    Participant

    SMC Pneumatics has a large varity of P.O. check valves.Check them out.www.smcpneumaticscanada.ca

    November 30, 2020 at 5:00 pm #21241
    admin
    Participant

    All check valves are not created equal. Bonomi has similiar checks but is guided on 4 sides (patent) plus center guided. They simply dont wobble”. They are a fraction of the cost of other checks

    November 30, 2020 at 5:00 pm #21242
    admin
    Participant

    Norgren have what they call a ‘Blocking fitting’ which does almost exactly the same thing. Norgren.com for details on their 102GA**** range oof fittings.

    November 30, 2020 at 5:00 pm #21243
    admin
    Participant

    Any poppet type 2-Way Spring Return Normally Closed (Non Passing) Valve and a Shuttle Valve (OR Element) can serve the same purpose. Pipe the outlet of the Shutttle Valve to the Pilot Port of the 2-Way, the free flow cylinder line to one of the Sh

    November 30, 2020 at 5:00 pm #21244
    admin
    Participant

    Ross has single and dual PO Checks available. There are also options on relieving the trapped pressure when required such as push button, remote air or electrical signals. See pages 65-66 of the catalog. the single sheet flyer is a newly releas

    November 30, 2020 at 5:00 pm #21245
    admin
    Participant

    Sorry, should have read the entire question first.

    November 30, 2020 at 5:00 pm #21246
    admin
    Participant

    NGT 502-339-8700

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.