One illusive valve….

ANVER

Home | Pneumatics Online › Forums › One illusive valve….

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 19, 2002 at 12:00 am #20150
    admin
    Participant

    Hi everybody,I am rather new to pneumatics so forgive me if this request seems out of this world. I am looking for a solenoid valve with the following specs… Max Pressure 250 psi Cv Factor >.5 Response (ms) Energise

    December 10, 2020 at 8:06 pm #21921
    admin
    Participant

    Try caontacting Parker Hannifen

    December 10, 2020 at 8:06 pm #21922
    admin
    Participant

    As a general rule that I’ve heard, 1 Cv = 25 SCFM so for 65 your looking at over 2 Cv. The max pressure should not be problem with most companies. 150 psi is typical but they usually have specials that go to 300 psi. Energizing in

    December 10, 2020 at 8:06 pm #21923
    admin
    Participant

    The valve will be used to actuate a cylinder on my senior thesis project. It’s going on a robot with a lot of weight and space restrictions. Hence I’m looking for a really small, cheap (read: poor college student), high pressure, high flow, and

    December 10, 2020 at 8:06 pm #21924
    admin
    Participant

    cylinder will be launching a 120lb BODY”?!?!?!?! Sounds like fun

    December 10, 2020 at 8:06 pm #21925
    admin
    Participant

    n response to your questions Joe,1) Contact the University of Cincinnati to apply to my school :)2) The landing is in my area, but not my problem. It’s more like my goal. The harder the landing the better actually. The body” is a 120 lb enemy”

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.