Products-archive
Bimba Launches AIROS™ Family of Air Preparation Bimba’s new AIROS family of air preparation products expands their air preparation catalog by adding a new Premium series (PG) to the existing MG series of filters, regulators, lubricators, and accessories.The PG series of compressed air filters, regulators, lubricators, and accessories offers: -NEW micro-fog lubricator options – Micro-fog lubricators create a very fine mist of oil, which can travel longer, more complex circuit paths than traditional lubricants -NEW vapor removal filter options – Vapor removal filters remove hydrocarbon odors from the air, providing filtration for ultra-sensitive applications -Enhanced safety features – All bowls utilize dual locks to ensure the bowl is in the correct position every time. Bayonet pressure locks make it nearly impossible to remove a bowl under pressure -Easier maintenance – Filters employ a single complete element assembly that can be easily removed for replacement -Compact footprint – The PG series is designed to fit in compact spaces while ensuring easy removal of components in that tight space, enabling for a more compact overall machine design -Configurability – Modular design allows for standalone or combined units to adapt to any pneumatic application’s needs. Additionally, the metal bowl option with corrosion-resistant interior paints offer improved visibility and durability -Available Safety Valve with Soft Start Capability – The PG series is also compatible with the newly offered Herion line of safety valves with soft start functionality – allowing for smoother, gentler initialization of equipment. This provides additional safety benefits as well as prevents damage that can be caused by abrupt air energization“The AIROS product family is truly a complete line of air preparation – everything from cost effective and basic options to the most complex, customizable, high end air preparation products,” says Adam Schrank, Director of Sales. “Together, the MG and PG series offer a complete family of air preparation options for any pneumatic system.”https://www.bimba.com/AIROS |
NEW PRODUCT: New Anti-Static Air Knife with 30% Better Performance is CE, UL and RoHS Certified EXAIR’s new Gen4 Standard Ion Air Knife eliminates static electricity 30% better at low inlet pressures which saves compressed air and money. Production speeds, product quality and surface cleanliness can improve dramatically. It eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. Gen4 products have undergone independent laboratory tests to certify they meet the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. They are also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, integrated ground connection and electromagnetic shielding.The Gen4 Standard Ion Air Knife incorporates EXAIR’s Standard Air Knife that minimizes compressed air use by inducing surrounding airflow at a ratio of 30:1. The unique amplified airflow carries the ions to the target, making it possible to eliminate static charges in less than a half second. Air volume and velocity are infinitely controllable from a “breeze” to a “blast” to gently wipe or forcefully blow away debris.EXAIR’s Gen4 Standard Ion Air Knife product line is available from stock in 3″ to 48″ long. The electrical ion source is shockless and there is no radioactive element. A new selectable voltage power supply has been designed to operate Gen4 products. Visit EXAIR.com to see the entire Gen4 static elimination product line. Applications include surface cleaning, neutralizing plastics, bag opening, printing machinery, packaging operations and elimination of painful static electricity shocks. Prices start at $335. www.exair.com/g4iak.htmFor more information, contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/g4iak.htm |
Pneumatic Pinch Valve Optimizes Single-use Batch Production Emerson’s new ASCO Series 273 Pneumatic Pinch Valve features an innovative design for improved tube retention and longer lifecycle—ideal for life sciences, food and beverage marketsST. LOUIS – Emerson, a global leader in fluid control and pneumatics technology, has released its ASCO™ Series 273 Pinch Valve for the life sciences market. The new series expands Emerson’s extensive pneumatic valve offering to single-use batch applications in bioreactor and fermentation tanks, tangential flow filters (TFF), chromatography skids and other drug discovery lab applications.The Series 273 features an innovative pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing. It also includes a safety guard to prevent exposure to moving parts, as well as a manual override feature that lets operators insert or remove tubing without actuating the valve during unplanned batch switching. “Not only does this enhanced valve design keep operators safer, but it also accelerates setup, lowers costs and makes unscheduled maintenance very easy,” says John Perry, vice president, global business development for Emerson’s ASCO valves.A pneumatically actuated pinch valve, the Series 273 makes no contact with process media, features a high lifecycle and provides a reliable pinching force over repeated use. Available in anodized aluminum and 316 stainless steel, the series is suitable for peroxide fumigation and includes a position indication option for valve on/off status feedback. Series 273 Pneumatic Pinch Valve specifications include: The Series 273 targets single-use batch applications in the pharmaceutical and biopharmaceutical markets, but is also suitable for food and beverage production. The pinch valve can be actuated using ASCO™ Series 501 or Aventics™ AV Series pneumatic valve manifolds and ASCO 580 CHARM electronics, which seamlessly integrates into DeltaV™ distributed control system. For additional information, please visit https://www.emerson.com/en-us/news/automation/1911-asco-pneumatic-pinch-valve |
NEW PRODUCT: Large No Drip Internal Mix Atomizing Nozzles Conserve Liquid EXAIR’s new 1/2 NPT No Drip Internal Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off. Internal Mix Atomizing Spray Nozzles mix liquid and air inside the nozzle and produce the finest atomization of liquids up to 300 centipoise. The patented No Drip design requires no additional air line to control the No Drip feature.When spraying any type of liquid, post-spray liquid flow can cause big problems. Unwanted drips can ruin product function on sealing or mating surfaces and ruin the appearance of painted or coated finishes. In addition, excess liquid flow wastes precious resources such as expensive coatings, chemicals or water. No Drip Atomizing Nozzles are ideal where no post-spray drip is permissible. When the compressed air supply is shut off, the no drip nozzle positively seals off the flow of liquid eliminating the possibility of drips.EXAIR’s 1/2 NPT No Drip Internal Mix Atomizing Nozzles are available in four patterns: narrow angle round, wide angle round, flat fan and 360° hollow circular pattern. They are for pressure fed applications that don’t require independent air and liquid control.The No Drip Atomizing Nozzles are fully adjustable to minimize air and liquid consumption and have interchangeable liquid and air caps. Flow ranges from 0.14 Gph to 303 Gph (0.5 Lph to 1147 Lph). They are also available in 1/8 NPT and 1/4 NPT, and are CE compliant and conflict mineral free. Prices start at $295. www.exair.com/1_2ndint.htm For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/1_2ndint.htm |
| Introducing Excelon® Plus
|
| ANVER Custom Vacuum Lifter Handles Products from the Inside
|
NEW Stainless Steel Cylinders from Compact Automation The Compact® Stainless Steel Round and Crimp Cylinders are manufactured to the highest standards of quality and reliability in a small, durable, and configurable package. Featuring a precision rolled body construction, this line is designed for long life, leak-free, low maintenance performance.With a wide range of bore sizes from 5/16″ up to 3″ as well as a variety of mounting styles and accessories we have the product to meet your critical motion control needs.Compact Automation About ITT ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. ITT is headquartered in White Plains, N.Y., with employees in more than 35 countries and sales in a total of approximately 125 countries. The company generated 2017 revenues of $2.6 billion. For more information, visit http://www.itt.com About ITT’s Connect and Control Technologies Business |
NEW PRODUCT: Low Cost Conveyor For Materials Up To 900ºF EXAIR’s new 2.5″ and 3″ High Temperature Line Vac Conveyors convert hose, tube, or pipe into a powerful in-line conveying system for high temperature materials up to 900ºF (482ºC). These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability. The High Temperature Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end, resulting in high output flows on the other. The response is instantaneous. Regulating the compressed air pressure provides infinite control of the conveying rate. High Temperature Line Vacs are CE compliant and available in seven sizes from 3/4″ to 3″. Construction is durable Type 303 or Type 316 stainless steel to resist high temperature, corrosion and contamination. Applications include sampling hot flue gases, exhausting fumes, conveying soot, ashes, salts and other hot debris. Other models for hopper loading, scrap trim removal, small part transfer and packaging are available. High Temperature Line Vac prices start at $435.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: 800 903-9247 Toll Free Fax: 866 329-3924 E-mail: techelp@exair.com www.exair.com/303htlv.htm |
| New from Festo – Electric Drives for Simple Motion These new actuators cost effectively apply electrics for basic motion while IO-Link functionality enables IIoT communication.  ISLANDIA, NY, Festo introduces the Simplified Motion Series of electric drives that combines the simplicity of pneumatics with the benefits of electric automation. These new electric drives equipped with Digital I/O and IO-Link® enable a range of operational and productivity benefits and deliver intelligent IIoT communication. The actuators in this series are built for simple motion between two mechanical end positions. The drives offer optimized motion characteristics, including gentle cushioning, while advancing and retracting into the end positions and pressing and clamping functionality. Units in the initial release include toothed belt axis, spindle and toothed belt axis, mini slide, electric cylinder, and rotary drive. The drives are plug and play for fast startup. No additional software or specific know-how is required. The parameters for advancing and retracting speed, as well as pressing and clamping force, are set directly on the drive. End position, cushioning path, and manual operation are also set on the drive. Each drive in this series is controlled via Digital I/O. End position feedback, which is similar to feedback from a standard proximity sensor, provides information about the completion of the motion task. IO-Link enables remote control, parameter copy, backup function, and read functions for process parameters. “For those machines and lab instrumentation where compressed air for pneumatics is simply not feasible, the Simplified Motion Series provides a cost effective, easy to apply, and well-featured electric solution,” said Sandro Quintero, Product Manager – Electric Automation, Festo. For more information about the Simplified Motion Series call 800-993-3786 and to see the full range of Festo products and solutions visit https://www.festo.us. |
Magnetic Grippers from Compact Automation The Compact® magnetic gripper is great for picking up ferromagnetic materials such as iron or steel in applications where other types of grippers and vacuum cups are currently being utilized. Our four new models with grip forces from 20 to 130 lbs. are now available. The new magnetic grippers from Compact® provide safe operation since the gripper will continue to hold the workpiece even with the loss of pneumatic pressure.Ideal for pick-and-place type systems or applications such as robotic end-of-arm tooling, conveyors, feeders, separators or where any precise positioning of goods or materials is required in the automation process.Compact Automation About ITT ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. ITT is headquartered in White Plains, N.Y., with employees in more than 35 countries and sales in a total of approximately 125 countries. The company generated 2017 revenues of $2.6 billion. For more information, visit http://www.itt.com About ITT’s Connect and Control Technologies Business |
| New Roundline cylinders from IMI Norgren® Seven new cylinder ranges expand proven product line  LITTLETON, Colorado – Now there are more choices than ever of versatile IMI Norgren® Roundline Cylinders, round-body, non-repairable actuators for lighter duty, lower force applications. The introduction of the Roundline Plus Expanded Range adds seven new cylinder types to the existing line-up. Three-position (3R) cylinders provide three positive stroke positions with a single cylinder. Non-rotating (NR) double acting and reverse acting cylinders have a unique square piston rod with rounded corners, ideal for applications where the load connected to the rod requires consistent orientation. All stainless steel non-repairable (SR) cylinders are ideal for food processing/packaging, medical, chemical or marine environments where washdown solutions and other corrosives are present. Tough duty (ZR) cylinders have a larger diameter two-piece piston rod, elastomer bumpers and Buna N U-cup seals for reliable operation in higher duty applications. Rod lock (LR) cylinders are normally clamped units that hold the piston rod in position when air pressure is not present, preventing drift at machine shutdown. Roundline hydraulic cylinders (HR) deliver up to 500 psi hydraulic pressure and slow, smooth movement. Finally, hole punch (HPR) single-acting cylinders have a removable cutter at the end of the rod with razor sharp cutting teeth designed to punch holes in thin plastic film. See the whole range at https://www.imi-precision.com/us/en/imi-norgren/roundline-cylinders
|
|
NEW PRODUCT: Dual Point Mini Cooler for Cooling Small Parts and Toolss EXAIR’s new Mini Cooler with Dual Point Hose Kit provides a stream of 20 degrees F (-7 degrees C) cold air to prevent heat buildup, reduce downtime and increase productivity. It is effective on small machining operations to eliminate burning, melting and heat related breakage. The dual point option allows the cold air outlet to be directed at two different spots when cooling larger diameter tools, cooling two separate points or opposite sides of a material or process. Single Point systems are also available.The Mini Cooler incorporates a vortex tube that converts an ordinary supply of compressed air into cold air at 20 degrees F (-7 degrees C). Flexible tubing that holds its position is provided to direct the cold airflow. An adjustable magnetic base allows easy positioning. Durable stainless-steel construction and an absence of moving parts assures maintenance free operation.The Mini Cooler is ideal for applications where liquid cooling cannot be used due to part contamination or cost. Tolerances, product finish and production rates can improve dramatically. In addition to preventing premature tool wear, the Mini Cooler is ideal for cooling sewing needles, blades, small tools and lens grinding. All Mini Coolers are CE complaint and operate at a quiet 76 dBA. Mini Cooler Systems with Dual Point Hose Kit, Swivel Magnetic Base and Manual Drain Filter Separator with Mounting Bracket are $345. Learn more at www.exair.com/dualmini.htm.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/dualmini.htm |
Barb fittings for miniature pneumatic and fluid control applications IMI Norgren® range of barb fittings designed for tight grip and reliable sealLITTLETON, Colorado – Corrosion resistance and easy installation in small spaces make metal barbed fittings from IMI Norgren® the ideal choice for a wide array of industrial automation uses including dispensing systems, gas sampling, and spraying systems. They are also used extensively in Life Science applications from laboratory equipment to medical devices. A single barb design allows for a tight grip with a reliable seal, while nickel plated brass and stainless-steel body materials resist corrosion. These cost efficient fittings also have a shorter overall height so they are easy to install in space restricted applications. They are available in 16 shapes – including adapters, elbows, tees, bulkheads, unions and crosses – as well as multiple barb sizes and thread sizes. Custom designs and materials can be produced to ensure optimal performance.To find the best shape and size for your miniature pneumatic or fluid control application, visit https://www.imi-precision.com/us/en/list/fittings-tubing-and-accessories/barb-fittings |
IIoT-Enabled Pressure Sensor Reduces Costly Pneumatic System Losses Emerson’s new IIoT-enabled AVENTICS™ PE5 pressure sensor provides alerts for excessive compressed air leaks, pressure drops and power supply issues before they become major issuesLEXINGTON, KY – Pressure losses in pneumatic systems can be costly and affect machine efficiency. The new AVENTICS PE5 pressure sensor from Emerson measures systems losses and will alert when the leakage rate exceeds a pre-determined value. This enables excessive leaks to be diagnosed early and addressed, before they become a major issue. The sensor has two digital or one digital and one analog outputs. An IO-Link connection makes it simple to connect to an Industrial Internet of Things (IIoT) network. The sensor can be used on new installations or easily added to an existing machine.“Pneumatic system leaks can become a major issue for companies using lots of compressed air” said Dieter Michalkowski, IIoT specialist with Emerson’s machine automation business. “Excessive leakage can lead to the need for larger compressors, or compromised machine performance. This new sensor addresses that issue in a simple and easy to implement way.”When the machine is switched off, the AVENTICS PE5 sensor measures pressure loss over time. If the pressure drops faster than desired, a local alert is set, and a signal can be sent via the analog or digital outputs. The local alert consists of a change in display color from green to red. To trigger a maintenance task or to automatically generate a work order, the analog and digital signals can be sent to a PLC or other network. The analog output can be switched between a current or voltage signal and the user has full control over the set points. The IO-Link connection offers additional set up and diagnostic options. The local display also shows how much faster the pressure has dropped than expected. The PE5 is rated for IP67 protection and combines electronic precision with user-friendly versatility. The sensor features simple switching between current and voltage, and between PNP, NPN and push-pull. This flexibility allows the PE5 to be used in a wide range of applications. No matter the environment, with the zero-point offset function the pressure sensor can be set to zero at any time and thus provides exact display and switching information. Pneumatic connections include G1/4 or 4mm push-in. Learn more about the PE5 and other IIoT solutions at www.aventics.com/us |
NEW PRODUCT: New Hot Tap Digital Flowmeters Simplify Installation EXAIR’s new Hot Tap Digital Flowmeters allow installation when compressed air piping is under pressure. By eliminating the need to isolate and remove pressure from the pipe, these compressed air flowmeters reduce installation time while maintaining safety. Hot Tap Digital Flowmeters incorporate two valves that the measuring probes pass through. A sound muffler that also collects chips from the drilling process eliminates installation debris from entering the airstream and minimizes noise exposure. Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks and optimizing air use.Each meter ships with the necessary hardware and tools for installation including drill bit, drill guide, chip capturing muffler, and hex wrenches. The Hot Tap feature is available on 2 inch through 8 inch flowmeters. They are available in standard units which display airflow values on a bright LED screen, with optional data logger to capture and manipulate the data, or with wireless capability to transmit the data securely over a wireless network. Airflow values are expressed in Standard Cubic Feet per Minute or Cubic Meters per Hour.Hot Tap Digital Flowmeters for schedule 40 iron pipe and Type L Copper are now available in sizes 2 inch, 2-1/2 inch, 3 inch, 4 inch, 6 inch and 8 inch. They are CE and RoHS compliant and can also be ordered for schedule 80 or 10S pipe. Prices start at $2004.00. www.exair.com/hottap.htmFor more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/hottap.htm |
| Custom actuators available fast
LITTLETON, Colorado – Proven IMI Norgren® brand actuators can now be custom engineered with quicker quotes and lead times to meet specific needs for challenging pneumatic applications. By expanding engineering and support teams to work with distributors, Norgren delivers modifications to a variety of catalog pneumatic actuators and related products. Custom capabilities range from adapting existing products to creating new designs to help designers and machine builders get the best performance and highest efficiency from their motion control. With expanded engineering and support teams, these custom products come with fast turnaround on quotes and product lead times. For more information, call (937) 770-2105.
|
Festo announces availability and support for the new DPC family of inch series compact ‘pancake’ cylinders – high-force short-stroke cylinders designed for tight spaces. Two versions of these long-life cylinders are available – the DPCA for new machines and the DPCB for maintenance, repair, and operations (MRO) applications with ‘drop-in’ compatibility to other manufacturers. “The automation industry recognizes that Festo differentiates itself through engineering innovation, product quality, and custom solutions that make our customers more productive,” said Michael Zakrzewski, Vice President of Market Management – North America. “The pancake cylinders DCPA and DCPB are important in serving customers with high force, compact cylinder requirements. We are proud to be broadening our pneumatic cylinder line with these products.”Both DPC A and B models feature a choice of eight bore sizes and variable stroke lengths up to four inches. Both models are pre-lubricated with Magnalube-G® PTFE grease, an extended-service-life lubricant. Magnetic piston options are available for cylinder position sensing as are sensors and other accessories such as clevises. Custom cylinders are also available.The DPCA cylinder body is machined from high-quality aluminum and is clear anodized for corrosion resistance. For added longevity and strength, the DPCA features a hard chrome plated stainless steel piston rod and a non-metallic composite rod bushing. The model DPCB features a self-lubricating composite body that offers long-service life and trouble-free operation. DPCB performance enhancing features include clear anodized aluminum alloy heads for corrosion resistance, stainless steel tie bolts, chrome plated stainless steel piston rod, and a Duralon® rod bearing for reduced wear.Festo acquired Fabco-Air, the originator of the pancake cylinder, in 2018 with the intent of broadening its pneumatic product portfolio by bringing customers a variety of inch-based product. Festo has now incorporated the Fabco-Air compact Pancake cylinders into its ERP and logistics system for easy online configuring and order processing. For more information, please visit www.festo.com. |
NEW PRODUCT: Heavy Duty HEPA Vacuum For 30 Gallon Drums EXAIR’s new 30 Gallon Heavy Duty HEPA Vac is a powerful, HEPA quality, industrial vacuum cleaner. This smaller volume drum means that it will fit in tighter spaces and is suited well for less frequent or lower volume applications. The Heavy Duty HEPA Vac is designed to move more material with less wear. It has been engineered to filter contaminants to HEPA requirements in dusty environments requiring frequent cleaning.It is extremely quiet at 82 dBA (half the noise of electric vacs), making it suitable for a wide variety of environments. An economical, easily maintained pre-filter stops larger particles, while the HEPA filter handles the smaller matter. All filters are tested for minimum 99.97% filtration at the 0.3 micron level to meet HEPA standards in strict accordance to IEST-RP-CC-007.EXAIR’s Industrial Housekeeping product line offers wet or dry vacuums from 5 gallons up to 110 gallons of capacity. They are available to outfit your existing drum or can be purchased with the complete drum assembly. Plastic or heavy duty aluminum vacuum tools are available. All EXAIR vacuums are CE compliant and carry a 5 year “Built to Last” warranty. Heavy Duty HEPA vacuum prices start at $1570.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/hepa30.htm |
ControlAir Announces New Precision Vacuum Regulator AMHERST, NH, USA – ControlAir Inc., a leading manufacturer of precision pneumatic and electro-pneumatic control products, today announced the introduction of the new Type 480V Precision Vacuum Regulator. It is the first vacuum regulator offering from ControlAir. The Type 480V Precision Vacuum Regulator provides precise control up to full vacuum. The unit is designed with a push type locking knob which allows for smooth output adjustment and the ability to lock in your setpoint to avoid unintentional adjustments.The Type 480V senses output pressure deviations to within 1/2″ water column pressure. Regulating range is from 0 to 30 in. Hg (-100 to -1.3 kPa). The unit is small in size and lightweight, less than 1 lb. The standard bracket and integral panel nut allow for versatile installation options. A soft valve seat design provides tight shut off and eliminates leakage in steady state operation.The Type 480V is ideal for any process requiring precise regulation of vacuum pressure. It is suitable for a wide range of applications which include Semiconductor manufacturing, Medical OEM, Mass Spectrometry, Pick & Place, and Leak Testing. Features: -Versatility – full vacuum control -Sensitive – senses output pressure deviations to within 1/2” water column pressure. -Compact size and low weight – less than 1 lb. (0.45 kg.) -Soft valve design – provides tight shut off and eliminates leakage in steady state operation -Easy installation – multiple mounting optionsThe Type 480V Vacuum Regulator regulating range is 0 to 30 in. Hg (-100 to -1.3 kPa). Atmospheric Intake is 0.04 scfm (1.1 Nl/min). Sensitivity is 0.5 in. w.c. (0.13 kPa). Ambient temperature range is 32° to 140° F (0° to 60° C). Flow rate is 100 scfh (47 Nl/min) maximum. The In and Out ports are 1/4” NPT, Gauge port is 1/8” BSPT (Rc 1/8). The Type 480V Vacuum Regulator weighs 0.93 lbs. (0.42 kg). Standard options include bracket and integral panel nut for versatile installation options. ControlAir Inc. manufactures precision pneumatic and electro-pneumatic controls. ControlAir’s markets include process control, semiconductor, printing and converting presses, diagnostic and surgical medical equipment, robotics, quality control, automotive, analyzers, compressors, pumps and paint equipment. For more information, ControlAir’s website, www.controlair.com, offers full product specifications with PDF files, 3-D Interactive Catalogs, downloadable 3-D and 2-D CAD drawings, and company profile. |
New IIoT Tool Demonstrates Potential of Digitized Pneumatics Emerson’s portable AVENTICS™ Smart Pneumatics Analyzer can quickly hook up to a user’s machine to show benefits of data and analysis available via the Industrial Internet of ThingsLEXINGTON, KY – Emerson has introduced a new tool to help pneumatic system users quickly and easily see the potential benefits of integrating IIoT. By connecting the new AVENTICS™ Smart Pneumatics Analyzer to the compressed air supply on an existing machine, users will have instant analysis options for key machine characteristics such as compressed air consumption and possible leakages. “By digitizing the pneumatic environment, the Smart Pneumatics Analyzer provides users with the option to directly experience the benefits and potential of IIoT applications on their own machine – in just a few simple steps,” says Dr. Michael Britzger, senior manager, digital transformation for pneumatic technologies at Emerson Automation Solutions. The portable analyzer case contains a Smart Pneumatics Monitor, AS series air preparation units and a tablet for visualizing the live data. Emerson personnel can show a user within minutes how they can use IIoT-enabled data for insights into their own machine.The monitor initially detects the system operating state, analyzes data, and provides this processed information to users for status-oriented maintenance, for example. While other solutions collect all available data and transfer it unfiltered, the Smart Pneumatics Monitor evaluates the data locally and uses it to generate information about the status of the system. All data from the valves, as well as from components connected to the I/O modules on the valve system, is read into a microprocessor and processed by means of mathematical algorithms. These algorithms are based on decades of expertise in AVENTICS™ pneumatic product engineering and application.Condition monitoring, the collection of operating states and their prediction as the basis for anticipatory maintenance, offers direct advantages for customers using IIoT applications. Because they can anticipate wear before it leads to machine downtimes, they allow users to significantly increase the availability of their equipment and reduce maintenance costs. Once defined limits are reached, the electronics can automatically send messages to ERP and MES systems, as well as maintenance or other staff. Data collected can also help optimize a pneumatic systems’ energy efficiency. “It’s important to us to support our customers in their digitization process as equals,” adds Britzger. “Based on the analysis results, we therefore also further develop the Smart Pneumatics Analyzer together with our customers especially for their application. This way, users can experience and apply the added value of IIoT for themselves.” In addition to being demonstrated by Emerson associates, the analyzer is available for sale to users if they would like to keep the unit at their facility. Learn more at www.aventics.com/us/IoT |
Bimba Launches Pneumatic Gripper System (BPGS) for High Gripping Force Applications Bimba has announced the expansion of its angular and parallel gripper portfolio by launching the new Bimba Pneumatic Gripper System (BPGS). The BPGS offers a cam activated, high gripping force solution for handling large and heavy objects in the most demanding environments.Key features of the BPGS include: -Gripping forces up to 450 lbs. at 80 PSI -Rapid actuation time with a 0.05 second close, 0.09 second open at 425 cycles per minute -Interchangeable pads for maximum material application flexibility -A compact size to fit into tight work envelopes in a variety of applicationsThe BPGS is comprised of a long-lasting, hardened steel chassis. This enables it to withstand hard impacts for maximum component longevity. The gripper will lock in a closed position for safety and is easily repairable by using a single wrench reducing operational downtime and cost. Users can configure the BPGS to meet specific application needs due to the vast array of jaws and pads available, including angular, regular, chisel, flange, and shovel. The BPGS is ideal for a wide variety of industries including automotive; sheet metal fabrication; thermoforming; and more.Visit www.bimba.com for more information on the Pneumatic Gripper System (BPGS). |
Festo Introduces Its Second-Generation Fingerboard- Latching System at OTC 2019 This innovative pneumatic system eliminates the high cost and reliability issues associated with electronics degrading in salt air.ISLANDIA, NY, — Festo showcases at the Offshore Technology Conference (OTC), NRG Park, Houston, the company’s latest pneumatic Fingerboard-latching system for drill-rig tubulars. Festo also introduces the rugged SIL3 rated VOFC/VOFD family of solenoid valves that are designed for the highest level of safe, long-term operation in extreme environments. Enhanced fingerboard control and monitoringThe Fingerboard-latching system utilizes the VTEM Motion Terminal’s intelligent pneumatic valves to control and monitor the exact locked or completely open position of each latch without the need of electronic sensors and wire harnesses on the Fingerboard. The VTEM Motion Terminal senses and controls the position of each latch from closed to 100% open by continuous monitoring of cylinder air pressure and flow. Each Motion Terminal features internal sensors, pressure regulators, flow control, exhaust valves, and processing and communications capabilities. Measurements are graphically displayed via human machine interface (HMI) and information is available to supervisory control systems.  Each intelligent valve replaces two ordinary pneumatic valves for a 50% reduction in the number of components. A white paper on the Fingerboard solution is available for download and can be requested by writing to customer.service.us@festo.com. “This second-generation solution represents a major step forward toward a safer and easier to maintain Fingerboard-latching solution,” said Craig Correia, Director, Process Industries, North America, for Festo.New corrosion resistant, SIL3 solenoid valves and coils available VOFC/VOFD solenoid valves and VACC solenoid coils increase process safety across the entire system, cutting costs associated with failure and maintenance. VOCD/VOFD solenoid valves can be used in many demanding applications and meet the highest safety standards (up to SIL3, explosion protection). These electric valves are backed by German Technical Control Board (TÜV) certificates up to SIL3 in accordance with IEC 61508. The surface of the valve housing is treated with the Ematal process for optimum resistance against atmospheric and chemical degradation both indoors and outdoors. Ematal anodizing creates a hard aluminum oxide layer with titanium oxide intercalations, which makes the valves resistant to wear and abrasion and gives these components first-class sliding qualities. The 3/2- and 5/2-way VOFC/VOFD solenoid valves are intended for controlling and safe deactivation of pneumatic drives in potentially explosive areas of chemical and petrochemical plants. The NAMUR flange pattern makes the solenoid valves suitable for quarter-turn actuators. The integrated spring chamber ventilation function protects quarter-turn actuators with spring return (single-acting cylinders and actuators) against contaminated ambient air and weather influences. The solenoid coils from the VACC series are available for ignition protection types: Ex e mb, Ex ia, Ex db, and Ex d. Local and regional certifications are available. Maximum reliability when it comes to replacement |
NEW PRODUCT: Small Internal Mix Spray Nozzles Coat, Cool, Treat and Paint EXAIR’s new 1/8 NPT small internal mix spray nozzles atomize fluids up to 28 gallons per hour. Internal mix atomizing nozzles mix the liquid and air inside the cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 centipoise. Small internal mix nozzles are available in narrow angle round pattern, wide angle round pattern and flat fan pattern and are used to coat parts in containers, cool laminates, or apply paint and lubricant. They combine liquid and compressed air to create a coating of liquid that can be easily adjusted to meet the needs of your application.With EXAIR’s 1/8 NPT small internal mix atomizing nozzles, you can coat, cool, treat and paint a variety of products. Used with water or coolant, atomizing nozzles are an efficient way to evenly cool hot items in your automated process.The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are also available in 1/4 and 1/2 NPT. A variety of flow patterns and liquid rates are available to meet your needs. External mix and siphon fed atomizing nozzles are available too, as well as patented no-drip versions of every atomizing nozzle. All models are adjustable, CE compliant and come with our 5 year Built to Last Warranty. 1/8 NPT Internal Mix price is $160. www.exair.com/1_8intmix.htmFor more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/1_8intmix.htm |
Magnetic coupling means more cylinder options IMI Norgren® MC Series rodless cylinders save space, have high load capabilitiesLITTLETON, Colorado – Longer stroke, smaller footprint and high-load and side-load capabilities are all special advantages of rodless pneumatic cylinders. Now IMI Norgren® MC Series magnetically coupled rodless cylinders deliver the extra benefits of greater design flexibility and easier application-specific customization.The cylinder’s stainless steel tube and machined components are independent of each other, with the carriage and piston synced by powerful magnets. This design allows more varied profiles and specialized profiles to meet requirements for applications like cutting, opening doors, transferring between conveyors, or feeding materials into machinery. An unguided version has an especially slim profile. IMI Norgren MC cylinders even offer oil service seals for hydraulic applications.To put these versatile cylinders to work in your factory or machine, visit https://www.imi-precision.com/us/en/imi-norgren/magnetically-coupled-rodless-cylinders or call 800-514-0129.
|
NEW PRODUCT: HazLoc Cabinet Coolers Approved for Class I Div 1 EXAIR’s new Hazardous Location Cabinet Cooler® Systems have been set apart from the competition by achieving the UL classified designation for Div1 environments. They have been tested by UL and passed their stringent requirements for use upon classified purged and pressurized electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G – and Class III environments. The cooling capacity of up to 5,600 Btu/hr. is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.EXAIR HazLoc Cabinet Coolers circulate 20°F (-7°C) air inside the enclosure to prevent high temperature faults. They mount in a standard electrical knockout while keeping the NEMA 4 or 4X rating of the enclosure. Cabinet Cooler Systems include an auto drain filter separator to ensure no moisture passes to the inside of the electrical enclosure. An optional thermostat control minimizes compressed air use and keeps the enclosure at ± 2ºF of the setting. EXAIR’s full line of Cabinet Cooler Systems are available for NEMA 12, 4 and 4X enclosures from 275-5,600 Btu/Hr and are UL listed and CE compliant with no moving parts to wear out. Applications include cooling control panels, PLC’s, microprocessors, fractional Hp variable frequency drives and robotics. HazLoc prices start at $795.00. www.exair.com/hazloc.htmFor more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/hazloc.htm |
| Festo Debuts Digitalization Solutions at Interphex Festo displays new digitalization solutions and innovative process, packaging, and laboratory automation products at Interphex 2019, Jacob K. Javits Convention Center, New York City. Festo Booth #1834. At 10 a.m. on April 3, Festo details a successful ISO50001 implementation that utilized data available from a cloud-based dashboard. Facility personnel can access trend, comparison, and diagnostics data from anywhere in the company. Both from a physical and controls perspective, Festo will describe installation steps and benefits. A white paper on this IoT implementation will be available to session attendees. The conference session will be held at Stage 4, Booth 2276. The Festo MSE6-E2M pneumatic energy efficiency module monitors the condition of Industry 4.0 modularity and reconfigurability demonstrated |
NEW PRODUCT: Larger Low Cost 316SS Air Conveyors for Food, Pharma and Chemical EXAIR’s new 2-1/2″ (64mm) and 3″ (76mm) 316 stainless steel Line Vacs are powerful in-line conveyors that transport high volumes of material through ordinary hose or tube. Designed for areas like food and pharmaceutical processing which require the benefits of 316SS including excellent chemical and corrosion resistance, performance in high or low temperatures, long service life and low maintenance. These two new sizes make it possible to convey more material over long vertical and horizontal lengths.Commonly used to fill hoppers, move trim and waste or transfer parts, the 316SS Line Vac conveyors eject a small amount of compressed air through directed nozzles into the throat to produce a vacuum on one end and high output flows on the other. Response is instantaneous. The material conveying rate is easily controlled with a pressure regulator. An optional bracket permits easy mounting. No moving parts or electricity assures maintenance free operation.Nine sizes from 3/8″ (10mm) up to 3″ (76mm) are available that fit popular hose and tube diameters. Threaded Line Vacs are available for use with common pipe. Heavy Duty Line Vacs resist wear from abrasive materials and convey more product faster and over longer distances. Materials of construction include aluminum, 303SS and 316SS. All EXAIR Line Vacs are CE compliant, meet OSHA pressure requirements, and are ready to ship from stock. 316SS Line Vac prices start at $461. http://www.exair.com/lg316sslv.htmFor more information contact: EXAIR Corporation |
ControlAir Announces New Precision Air Pressure Regulator AMHERST, NH, USA – ControlAir Inc., a leading manufacturer of precision pneumatic and electro-pneumatic control products, today announced the introduction of the new high flow capacity Type 7000 Precision Air Pressure Regulator. The Type 7000 is designed to provide the highest level of regulation accuracy and repeatability during variable high flow conditions. The large port size options and rugged construction make it suitable to be used in a wide range of pneumatic control systems.The Type 7000 utilizes an isolated control chamber to minimize output variation and vibration/honking during flow conditions. An integral aspirator tube helps maintain downstream pressure by compensating for pressure droop during flow conditions. The balanced supply valve virtually eliminates changes to supply pressure variation. Soft supply and exhaust valves minimize air consumption.The Type 7000 is ideal for any process requiring high flow capacity and precise regulation of air pressure. It is suitable for a wide range of applications which include air gauging, gas analyzers, diagnostic equipment, tool balancers, articulating arms, medical ventilating, calibration equipment, pneumatic counter balancers, and web tensioning.Features: -Control sensitivity to 1/2″ water column pressure -1/4”, 1/2″, or 3/4″ NPT porting -2 1/4″ NPT gauge ports -Stable Output – Isolated control chamber prevents output variation under varying conditions of flow, supply pressure, and temperature. -High Flow Forward – allows flows up to 250 scfm. -High Exhaust Capacity – allows relief flow up to 30 scfm -Sensitive – senses output pressure deviations to within 1/2” water column pressure. The Type 7000 Precision Air Pressure Regulator is available in 1/4″, 1/2″ or 3/4″ NPT porting. Output ranges include 0-2 psig (0-0.15 bar), 0-10 psig (0-0.69 bar), 0-30 psig (0-2 bar), 0-60 psig (0-4 bar), 0-100 psig (0-6.89 bar), 0-150 psig (0-10 bar) and 0-200 psig (0-13.8 bar). Maximum supply pressure is 250 psig (17.5 bar). A wide temperature range of -40º to 200º F (-40º to 93º C). Flow capacity up to 250 scfm (7,075 Nl/min) depending on port size and supply pressure. Exhaust capacity is 30 scfm (849 Nl/min) with downstream 5 psig (0.35 bar) above 20 psig (1.38 bar) set point. Effect of Supply Variation is less than 0.3 psig (0.007 bar) for 100 psig (6.7 bar) change. The Type 7000 Precision Air Pressure Regulator weighs 2.5 lbs. (1.13 kg). Standard options include tamper-proof cover, tapped exhaust, non-relieving, and ATEX approvals. ControlAir Inc. manufactures precision pneumatic and electro-pneumatic controls. ControlAir’s markets include process control, semiconductor, printing and converting presses, diagnostic and surgical medical equipment, robotics, quality control, automotive, analyzers, compressors, pumps and paint equipment. For more information, ControlAir’s website, www.controlair.com, offers full product specifications with PDF files, 3-D Interactive Catalogs, downloadable 3-D and 2-D CAD drawings, and company profile. ControlAir Inc. |
NEW PRODUCT: Soft Grip Back Blow Safety Air Gun for Cleaning Small Inside Diameters EXAIR’s new Soft Grip Back Blow Safety Air Gun uses the smallest back blow nozzle available to deliver a blast of air to effectively blow debris and liquids from inside small pipe or hose diameters, channels, bores, holes, internal threads and other internal part features. The ergonomic design of the air gun keeps the operator’s hand in a comfortable position so it can be used for hours of continuous use without fatigue.An array of holes on the Model 1004SS M4 Back Blow Air Nozzle provides a forceful back-facing 360-degree airflow to clear out coolant, chips and light oils from machining processes. This nozzle prevents blowing chips further into a part, tube or pipe and eliminates any safety hazard created by blowing debris out the far end of a pipe or tube. Air consumption is only 4.5 SCFM at 80 PSIG with a low sound level of 75 dBA. The nozzle is manufactured to clean inside openings as small as 1/4″ (6mm) and up to 1″ (25mm). It is constructed of type 316 stainless steel to provide durability and superior resistance to corrosion. The air gun with nozzle is OSHA and CE compliant.A variety of Safety Air Guns with Back Blow Nozzles are available for cleaning diameters up to 16″ (406mm). Chip Shields to protect the operator from the exiting debris are included with the Soft Grip, VariBlast Compact and Heavy Duty Back Blow Safety Air Guns. Extension pipes from 6″ (152mm) to 72″ (1829mm) are available to provide reach for longer tube and pipe clean out. Prices for the Soft Grip Back Blow Safety Air Gun start at $161. www.exair.com/attobbsag.htm For more information, contact:EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/attobbsag.htm |
Vacuum pumps increase productivity, reduce downtime New IMI Norgren® venturi vacuum pump range includes application-specific capabilitiesLITTLETON, Colorado – New IMI Norgren venturi vacuum pumps, cartridges, cups and fittings are designed to handle diverse materials ranging all the way from sheet metal to corrugate to eggs. The single-stage inline venturi pump design allows contaminants to pass through without clogging, for greater reliability, productivity and uptime. Eliminating additional filters and clean screens lowers maintenance and operating costs.The comprehensive IMI Norgren range includes unique, application-specific vacuum pump design options such as adjustable vacuum or flow rates, air amplifiers or material transfer. The pumps and cups come in a variety of materials, including 303, 304 and 316 stainless steel, FDA approved acetal resin and PVC for premium performance in any operating environment. To put the IMI Norgren venturi vacuum pumps and components to work in your plant or machine, visit https://www.imi-precision.com/us/en/list/vacuum or call 800-514-0129. |
ControlAir Announces New High Flow Capacity Volume Booster AMHERST, NH, USA – ControlAir Inc., a leading manufacturer of precision pneumatic and electro-pneumatic control products, today announced the introduction of the new Type 6100 High Flow Capacity Volume Booster. The Type 6100 is designed to significantly increase the stroking speed in valve actuation system applications that require high forward flow and exhaust capacities.The Type 6100 is a 1:1 signal to output relay that when used with a positioner/actuator, is designed to increase the stroking speed of control valves. An integral bypass valve provides system stability while allowing normal positioner airflow and normal valve actuation with small input changes. The soft valve seat design provides tight shutoff and eliminates leakage in steady state operation to reduce costly air consumption.Type 6100 applications include actuation of control valves used in chemical, petrochemical, oil and gas, pharmaceutical and food processing markets. Other OEM applications include printing presses, textile machinery, tire machinery, air operated pumps, paper machinery and paint spray systems.The High Flow Booster handles up to 250 psig (17.0 bar) supply air pressure and provides output air pressure of up to 150 psig (10.0 bar). Temperature limits are -40º to 200ºF (-40º to 93ºC). Exhaust capacity is up to 80 scfm (2,264 Nl/min) with downstream 5 psig (0.4 bar) above 20 psig (1.38 bar) setpoint. Supply pressure effect is 0.1 psig (.007 bar) for a 25 psig (1.7 bar) change. The Type 6100 weighs 2.5 lbs (1.13 kg). A choice of three output ports, 1/4″, 1/2” or 3/4” NPT provides plumbing flexibility for easy hookup. ControlAir Inc. manufactures precision pneumatic and electro-pneumatic controls. ControlAir’s markets include process control, semiconductor, printing and converting presses, diagnostic and surgical medical equipment, robotics, quality control, automotive, analyzers, compressors, pumps and paint equipment. For more information, ControlAir’s website, www.controlair.com, offers full product specifications with PDF files, 3-D Interactive Catalogs, downloadable 3-D and 2-D CAD drawings, and company profile. ControlAir Inc.
|
NEW PRODUCT: 360 Degree Static Eliminator is CE, UL and RoHS Certified EXAIR’s new Gen4 Super Ion Air Wipe provides a uniform 360 degree ionized airstream that clamps around a continuously moving part to eliminate static electricity and contaminants. It is ideal for removing dust, particulates and personnel shocks on pipe, cable, extruded shapes, hose, wire and more. This engineered product has undergone independent laboratory tests to certify it meets the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. It is also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, a replaceable emitter point, integrated ground connection and electromagnetic shielding.The Super Ion Air Wipe uses a small amount of compressed air to entrain high volumes of room air. Two shockless ionizing points powered by a UL Component Recognized 5kV power supply fills the airstream with static eliminating ions. That airflow attaches itself to the surface of the material running through the air wipe and neutralizes the charge.The Super Ion Air Wipe, which compliments EXAIR’s complete line of Gen4 Static Eliminators, has an aluminum construction that is lightweight and easy to mount using the tapped holes provided. Two sizes include a 2 inch (51mm) diameter and a 4 inch (102mm). There are no moving parts to wear out. Visit EXAIR.com to see the entire Gen4 Static Eliminator product line and 1/2 inch through 11 inch Super Air Wipes for applications without static. Prices start at $957. www.exair.com/g4siaw.htmEXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com https://www.exair.com/g4siaw.htm |
Excelon Plus air prep units save space, enhance safety New FRLs from IMI Norgren reduce size by 20%, weight by 35% while making installation and maintenance easier.LITTLETON, Colorado – The latest IMI Norgren® air preparation equipment for industrial applications, the Excelon® Plus modular filter/regulator/lubricator (FRL), delivers great performance and enhanced safety in a unit that is 20% smaller and 35% lighter.Safety elements of the new Excelon Plus include padlock features on both the shut-off valve and regulator to prevent tampering, and a double safety lock on the bowl to prevent it from being removed when in use. A rotating shut-off valve isolates the system from air as needed. An innovative Quikclamp design speeds installation and simplifies removal.The Excelon Plus filter extracts more than 96% of water from compressed air. For easier maintenance, a new filter assembly allows the filter element and bowl to be removed together for faster, cleaner service. This system also reduces the clearance required for maintenance to just one inch, freeing up valuable machine real estate. Excelon Plus regulators have a large, flush mounted, integrated pressure gauge that is easy to read and less vulnerable to damage. Lubricators are available in Micro-fog® and oil fog to meet various design and tool specifications. Components are available individually or in a standard combination FRL unit with a single part number, pre-assembled and ready to install. For better air prep in your plant or machine, visit https://www.imi-precision.com/us/en/imi-norgren/excelon-plus or call 800-514-0129. |
| ANVER Small Compressed Air Venturi Vacuum Pumps JV Series – Advanced, Plastic Bodied Mini Vacuum Pumps  ANVER JV Series Mini Vacuum Generators are ideal for use as vacuum pumps where space is limited, or for use as a lightweight stand alone vacuum pump such as in robotic applications. Their small size permits mounting close to the load pick-up point, decreasing response time and minimizing air consumption. Thermoplastic construction ensures excellent performance characteristics while providing an economical vacuum solution for many design applications.The JV Series are mini Venturi vacuum generators. The vacuum control of these pumps is served through a separate manual or automatic control valve situated on the compressed air supply line. Supplied with 5 mm female threads, which are compatible with 10/32 threads.JV Series pumps are suggested for use anywhere vacuum is required and a simple, low maintenance, and lightweight design is desired.ANVER Corporation 36 Parmenter Road Hudson, MA 01749, USA Phone: +1-978-568-0221 North America Toll Free: 800-654-3500 Fax: +1-978-568-1570
|
The Beswick PRD3 series miniature pressure regulator builds on the proven technology of our award winning PRD2 regulator series. Improvements include: An enhanced regulating valve, larger 10-32 threaded inlet and outlet ports, and simplified internal construction. The PRD3 incorporates frictionless pressure sensing elements, an optimized valve to sensing area ratio, two stages of regulation, and Beswick proprietary regulator technology making it especially well suited for the control of low pressures, such as 0.5 psi. Additionally, the two-stage design ensures a stable outlet pressure despite wide swings in the inlet/source pressure. The Beswick PRD3 tames the “droop and rise” problem common to many, less advanced, pressure regulators. You can learn about “droop and rise” at Basics of Pressure Regulators. Beswick Engineering Co., Inc. |
| LVIT Technology – Replacing Linear Potentiometers with a Contactless Solution ILPS-19 Series Linear Position Sensor by Harold G. Schaevitz Industries LLC ILPS-19 Features: Operating from a variety of DC voltages, the ILPS-19 series offer a choice of four analog outputs and all include HGSI’s proprietary SenSet field recalibration feature. The ILPS series also includes two larger body versions, the ILPS-27 and ILPS-27L, for those applications needing a heavier duty unit and a spring loaded version called the ILPS-18S. Technical data sheets and additional information can be found at www.hgsind.com. Product Link:
|
ITT Compact Automation to Showcase Expanded Packaging and Industrial Automation Solutions at PACK EXPO International Compact Automation offers innovative motion control products to meet customers’ precise needs with a manufacturing capability of producing customized products for global conveyor and robotics applications. Engineered for the packaging and industrial automation markets, Compact Automation’s products are powerful, repairable and configurable, offering a high level of performance in a small package. The base platform is fully customizable to specific applications and designed to improve work-holding performance helping manufacturers to achieve gains in equipment uptime, throughput and safety. “At Compact Automation, we have the expertise to meet the packaging industry’s unique and challenging application requirements,” said Brooks Hafner, Manager of Application Engineering, Compact Automation. “Our high-quality products are fully customizable and designed to increase performance, decrease total cost of ownership and improve the reliability of the entire application assembly. We’re excited to showcase our comprehensive portfolio of motion control solutions including new innovations that improve work-holding performance in manufacturing robotics.” During PACK EXPO, Compact Automation will showcase its motion control solutions with a new, unique work-holding products display where attendees can see a robotic display cycling through each of the following solutions: Compact Automation representatives will be available throughout PACK EXPO International at Booth N6333 in Chicago’s McCormick Place. For more information regarding Compact’s packaging industry solutions, please visit www.compactautomation.com/packaging. About ITT About ITT’s Connect and Control Technologies Business |
NEW PRODUCT: New Anti-Static Ionizing Bar with 25% Better Performance is CE, UL and RoHS Certified EXAIR’s new Gen4 Ionizing Bar eliminates static electricity 25 percent better than previous models by eliminating larger static charges, faster. It has improved range and is effective when mounted up to 4 inches from a charged surface. Production speeds, product quality and surface cleanliness can improve dramatically. It eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. Gen4 products have undergone independent laboratory tests to certify they meet the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. They are also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, integrated ground connection and electromagnetic shielding.The Gen4 Ionizing Bar is compact which allows it to fit in the confined spaces of machinery, using an integrated mounting flange, where a static charge is generated. A high concentration of positive and negative ions produces fast static decay, neutralizing surfaces which are causing production, quality or safety problems.EXAIR’s Gen4 Ionizing Bar product line is available from stock in 3 inches to 108 inches long. The electrical ion source is shockless and there is no radioactive element. A new selectable voltage power supply has been designed to operate Gen4 products. Visit EXAIR.com to see the entire Gen4 static elimination product line. Applications include surface cleaning, neutralizing plastics, bag opening, printing machinery, packaging operations and elimination of painful static electricity shocks. Price starts at $170. Learn more at http://www.exair.com/g4ib.htmFor more information, contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com http://www.exair.com/g4ib.htm |
Electro-Pneumatic Pressure Regulating Valve Features Low Energy Consumption Sub-base mounted EV03 E/P from AventicsLexington, Kentucky – The sub-base mounted EV03 electro-pneumatic (E/P) pressure regulating valve from Aventics features extremely low energy consumption and can guarantee pressure control during a power loss. Depending on the version, maximum power generation is between 160 mA to 220 mA. The EV03 also offers precision, with hysteresis as low as 0.7 psi, and flow up to 0.88 Cv (880 l/min) at 10 bar of pressure. The EV03 is available in models with an LCD display, or only LED indication. Configurable with the LCD display are: pressure range, regulator behavior, actual value output, or switch output control.The Aventics EV03 E/P valves are externally piloted and operate via a poppet valve design for fast, reliable response and have pressure ranges from 0 to 145 psi (1 to 10 bar). The electrical connection is an M12, 5-pin A-coded connector, and electrical protection is IP65. Operating voltage is 24 VDC. Standard output values are 0 to 10 volts or 4 to 20 mA. The compact design has a sub-base with G1/4 connections for input and output, and G1/8 for exhaust.Electro-pneumatic pressure regulating valves deliver precise and proportional pressure control relative to an electrical signal, acting as electrically operated pressure regulators. They can control pneumatic actuators, cylinders, brakes, clutches and other process functions across a range of industries. Classic examples include precise positioning of parts and components, variable control of welding tips, weight-dependent balancer/dancer technology, and exact controlling/metering in cutting-edge painting systems. The EV03 is one of many precision E/Ps offered by Aventics. Further information is available at www.aventics.com/us. |
CSV 10mm Pneumatic Solenoid Valve New for 2018, Humphrey CSV pneumatic solenoid valve is miniature cartridge style, and developed around the needs of medical devices and applications where high value from confined spaces is critical. The 10mm wide CSV is multi-purpose and ready for device integration with cleverly ported sub-bases or multi-valve manifolds. It is suitable for 2- or 3-Way, Normally Closed or Open, or as Diverter and Selector functions. The cartridge body is flexible, and ready for any number of compact single or multiple valve piping solutions created by your Humphrey engineering team or directly integrated into your device. 12 and 24VDC voltages are standard – Contact factory for others. Made in the USA. RoHS and REACH compliant.Features include:-Direct Acting Multi-Purpose Design -Pressure Balanced -Pressure Range: Vacuum – 30 psi -Max Leakage @ 30 psi: 4.0 sccm -Flow @ 10 psi: 22 slpm typical -Flow @ 20 psi: 35 slpm typical -Flow @ 30 psi: 46 slpm typical -On/Off Response Time: 8/4 msec typical -Weight: 11 grams -2 Watt: 12 or 24 VDC Coil Standard -Customizable for Power and Flow Requirements -NBR Seals Standard, FKM Availablehttps://www.humphrey-products.com |
NEW PRODUCT: Heavy Duty Air Powered Conveyor Resists Wear and Transports More Heavy Duty Line Vacs eject a small amount of compressed air through directed nozzles into the throat to produce a vacuum on one end and high output flows on the other. Response is instantaneous. The material conveying rate is easily controlled with a pressure regulator. An optional bracket permits easy mounting. No moving parts or electricity assures maintenance free operation. Seven sizes up to 3″ (76mm) are available that fit popular hose and tube diameters. Threaded Heavy Duty Line Vacs are available for use with common pipe. Standard duty models made from aluminum, 303SS and 316SS are also available in nine sizes, with or without threads. All EXAIR Line Vacs are CE compliant, meet OSHA pressure requirements, and are ready to ship from stock. Heavy Duty Line Vac prices start at $396.00 For more information contact: |
Bimba Launches Plug-and-Play Vacuum End-Of-Arm Tooling for Collaborative Robots University Park, IL. – Bimba, an industry-leading innovator of pneumatic, hydraulic, electric, and vacuum motion solutions, is proud to announce the launch of the Collaborative Robot Vacuum Tool (CRVT). This device offers a new plug-and-play end effector option for collaborative robots.Developed to meet the versatile nature of collaborative robots, Bimba’s CRVT comes off-the-shelf as a complete solution – no external valve required. Although designed to support a variety of applications with minimal configuration, Bimba offers a wide array of pump options to enable users to meet the vacuum requirements of their application.“Collaborative robots are making it easier than ever before for manufacturers to implement automation. With the CRVT, Bimba is looking to make the end effector as flexible and easy to use as the robot,” says Jeremy King, Product Manager for Bimba. “The CRVT is designed to be controlled using the I/O connection built into the robot. No additional software or controls are required. That means simply connecting the tool to the robot and supplying an air-line to it. Once that’s done, you’re ready to program!”King continues, “Vacuum end effectors offer many advantages over mechanical grippers. They only require access to one side of the work piece. In addition, vacuum grippers can handle a variety of part sizes, shapes, and weights without making changes to the robot’s settings.” As part of Universal Robots’ UR+ program, the CRVT is tested and approved to integrate directly with UR robots, ensuring set-up, programming, and operation can all be accomplished with ease. Compatibility with additional robotics manufacturers will be available in the future. The CRVT comes standard with venturi vacuum pump, valve, vacuum switch, muffler and cups integrated in a single easy to use end effector. Visit www.bimba.com for more information. |
Complete gripping system kit for Universal Robots robot arms The new SCHUNK End-of-Arm Modular System for Universal Robots. Up to 36 product combination possibilities. Manual change systems for fast gripper changeIn the first step the SCHUNK gripping system kit for Universal Robots robot arms will include: The multi-tooth guided and especially precise and powerful SCHUNK parallel grippers PGN-plus-P in the sizes 80 and 100, the multi-tooth guided centric grippers PZN-plus 64, the price-to-performance-optimized universal grippers JGP 80 and 100; the long-stroke grippers KGG 100-80 and PSH 22-1, the electric gripper for small components EGP, and the Co-act EGP-C, designed for collaborative applications. All micro valves for actuating the pneumatic modules are integrated in the SCHUNK adapters. Added to this is the manual change system SHS with integrated air feed-through, electrical feed-through, and optional locking monitoring for gripper change in a matter of seconds. The changing system facilitates a particularly flexible use of the UR arms, as complicated set-up processes are no more necessary, and both SCHUNK grippers and other actuators with ISO-50 flange can be precisely and reliably exchanged in just a few steps. Right from the beginning, an attractively priced force/torque sensor is also included in the SCHUNK modular system kit. The SCHUNK FT AXIA 80 facilitates the precise measuring of forces (resolution 1/10 N) and torques (resolution 1/200 Nm) in all six degrees of freedom. Altogether, the modular program currently enables 36 combination possibilities. With maximum gripping forces ranging from 140 to 930 N and strokes from 6 to 40 mm, it covers a wide range of fields of application, both in conventional automation and in the field of collaborative applications. It is therefore equally suitable for newcomers to automation as well as for professionals in the metal-cutting industry, the automotive industry, and the electronics industry, as well as many other sectors seeking to tap into the potential of automation using UR robots. |
| LA-20.6 Series Industrial AC-LVDTs from H. G. Schaevitz LLC dba Alliance Sensors Group  Moorestown, New Jersey, Alliance Sensors Group, a div of H.G. Schaevitz LLC, has expanded its linear position sensor line with the new LA-20.6 series of industrial AC-LVDTs (Linear Variable Differential Transformers). These high precision linear sensors are contactless inductive devices designed for industrial and commercial user and OEM applications in the factory automation, general industrial, and test and measurement markets. The LA-20.6 AC-LVDTs feature infinite resolution, excellent linearity, and a wide operating temperature range, making them ideal for a wide variety of OEM position sensing applications where flexibility is important.Features: -0.812 inch (20.6 mm) OD SS body -11 ranges from ±0.050 to ±10.0 inches (±1.27 to ±254.0 mm) –55 to 125 C operating temperature -Good stroke-to-length ratio“Alliance Sensors Group has for many years been known for its AC-LVDTs and popular push button calibrated LVDT signal conditioners. We are excited about moving further into the general industrial marketplace with our newly expanded AC-LVDT product lines.” says Harold Schaevitz, President and CEO of Alliance Sensor Group.LA-20.6 series industrial AC-LVDTs operate from a nominal 3 Vrms, 2.5 – 3.3 kHz excitation source. They are packaged in a 0.812 inch (20.6 mm) OD SS housing with 12-inch leads, and are offered with either a metric or unified threaded 0.250 inch (6.4 mm) diameter core that works in a 0.313 inch (8 mm) ID bore. When mated with ASG’s SC-200 DIN-rail-mountable industrial AC-LVDT signal conditioner, an LA-20.6 series LVDT becomes part of a complete position measurement solution ASG’s AC-LVDTs are also available in other body and range versions, including the LA-9.5, LHA-19-A, LHA-19-R, LA-19-A, LA-21, LA-25, and LA-27 series. For more information, go to www.alliancesensors.com. |
NEW PRODUCT: 3/8″ Super Air Wipe Dries, Cools & Cleans Small Diameters
For more information contact: EXAIR Corporation
|
Unique Features of ANVER Mechanical Vacuum Lifters Instant attach and release is provided via the hoist up and down movement. The attach and release alternates each lift cycle for fast, efficient handling. Mechanical vacuum lifters increase the speed and efficiency of the horizontal handling of sheet and plate, panels, and all types of nonporous materials.-Simple to operate. One person can control the entire operation. No oil fumes or noise pollution. -Easy to Maintain. Only the highest quality components and superior construction are used with few moving parts. -Extremely Safe. Load cannot be released until it is set down on a surface.ANVER Mechanical Vacuum Lifters are suitable for 100% duty cycle 24 hour a day operation. They never overheat or burn out. -Easy to Maintain and Keep Operating in Heavy Production Environments. -ANVER Mechanical Vacuum Generators comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and European requirements. Click here for more information on Vacuum Lifting Device Safety Standards.Standard on Each Generator: -Vacuum gauge ANVER Corporation |
Festo Showcases Its New Solution for Variable Control of Flow Rate or Fill Level at Powder & Bulk Solids 2018 The Festo exhibit also features components for automating dispensing and conveying in clean or harsh environments. (Festo Booth #2939)Festo introduces at the International Powder & Bulk Solids Conference and Exhibition, Donald E. Stephens Convention Center, Rosemont, Illinois, April 24-26, its new control solution for infinitely variable flow rate and fill level based on the DFPI linear pneumatic actuator. The company also showcases its range of process valve solutions for clean or harsh environments where powders and bulk solids are dispensed from hoppers and conveyed to downstream processes. (Festo Booth # 2939) The Festo DFPI linear pneumatic actuator with integrated displacement encoder controls flaps, guide plates, and louver dampers in flow-rate applications. This DFPI is also applied to variable fill-level systems. A demonstration at the Festo booth reveals the new control system’s failsafe functionality where, in the event of power or pressure failure, operations personnel manually advance the drive unit to a freely selectable safety position. This pneumatic solution offers simple maintenance and higher forces than an electrical actuator. Shipped fully assembled and tested these linear drives are equipped with positioners and valves. Festo also supplies ready-to-install customized control cabinets that reduce engineering and assembly overhead for OEMs and end users. Additional products featured at the Festo booth include:• A hazardous environment air preparation system with safety valve • VOFC and VOFD solenoid valves for hazardous and safety applications. • A clean design with high corrosion and acid resistant CRDSNU pneumatic actuator • Self-adjusting pneumatic cylinders for faster installation and more reliable operationAs a single source powders and bulk-solids automation supplier, Festo offers plug and play components, including a modular control platform; HMI; valve terminals; valve assemblies for butterfly, pinch, and ball valves; electric and pneumatic linear and rotational actuators; integrated motors/drives; sensors; and I/O. Booth personnel will inform attendees about the new Stars of Automation program that guarantees shipment of core products within 24 hours. Global guaranteed fast shipment means fewer replacement components must be carried in inventory, which lowers overhead. Stars of Automation simplifies and speeds up ordering for OEMs and end users and, in effect, reducing time to market for new automated systems. “Show attendees who know Festo as a pneumatics company will be excited to see that we offer a total process automation solution – everything from an integrated control platform for both pneumatics and electrics down to I/O,” said Craig Correia, Director, Process Industries, North America, for Festo. For more information on powders and bulk solids solutions call call Festo at 800-993-3786 and visit the Festo website www.festo.us. Be sure to stop by the Festo Booth #2939.www.festo.us. |
| NEMA 4X Cabinet Coolers Fit In Tight Spaces
Cabinet Coolers convert an ordinary supply of compressed air to 20F without refrigerants or CFC’s. The cold air is circulated through the enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 Btu/hr. are available. Cabinet Cooler systems include a compressed air filter to assure no moisture or dust is introduced inside the panel. Optional thermostat control minimizes compressed air use. Cabinet Coolers are UL Listed, conform to the CE general safety directive for machinery and have no moving parts to wear out. The Side Mount Kits maintain the NEMA 4X rating of large and small electrical enclosures. Models for use on NEMA 4 and 12 enclosures are also available. Applications include cooling PLCs, microprocessors, variable frequency drives, industrial computers, and robotics. Side Mount Kits start at $220. For more information contact: EXAIR Corporation |
Quincy Compressor Introduces the Industry’s First VSD Air Compressor for Extreme Environments BAY MINETTE, Ala., Quincy Compressor introduces the industry’s first VSD air compressor for extreme conditions. The QGV BADGERXE NEMA4 VSD is designed to withstand the harshest environments trouble-free. Now you can save energy anywhere and lower your service cost with a lower oil volume and a longer consumable life.Quincy Compressor designed the QFD (Quincy Frequency Drive) to provide maximum uptime and productivity for its users. The BADGERXE combines high protection and optimized cooling. It utilizes a unique cabinet cooling system to keep temperatures in check. It has passed tests at sites in the field that were chosen specifically for their harsh conditions.The QFD has a unique thru-the-wall mounted design that separates the drive heat from the enclosure and protects the drive electronics to an IP5X protection degree. The NEMA4 enclosure provides a variation of protection on all fronts. It delivers a degree of protection to personnel against incidental contact with the enclosed equipment; protection against falling dirt, rain, sleet, snow, windblown dust, splashing water and hose-directed water; and against external formation of ice on the enclosure.Quincy Compressor is a leading designer and manufacturer of reciprocating and rotary screw air compressors, from one-third to 350 horsepower; vacuum pumps and a full line of air treatment components. Quincy employs nearly 450 worldwide and sells through multiple channels, including a network of direct and indirect partners, commercial retailers and online. The Quincy brand is synonymous with quality, delivering “Performance You Demand. Reliability You Trust.” To learn more about the company and to locate an authorized air expert near you, visit www.quincycompressor.com. |
Bifold’s Circuit Designer – Modular solutions with drag and drop system The Bifold Circuit Designer allows you to design a bespoke modular solution or tubed valve circuit comprising a series of valves in any order or orientation (where applicable) using a schematic drag and drop system. The completed system can then be bought as a modular solution or as a list of separate valves from Bifold. • Design a circuit using drag and drop (new schematics added regularly). • Organise and manage your projects in the Project Centre. • View the modular solution code and description or a list of separate valves and fittings. • Create a PDF schematic diagram and description for sending with a quote. • View and print the Modular Solution Bill of Materials (BOM) or separate valves (BOM). • For users with Solid Edge ST6 and above, create a 3D model and dimensional drawing for a Modular Solution. • 3,500 + systems already configured. • New users configuring systems every week. Installation Download and run setup.exe from: – https://www.bifold.co.uk/BifoldCircuitDesigner.aspx Further Information For more information, screenshots and Getting Started Guide, visit: – https://www.bifold.co.uk/BifoldCircuitDesigner.aspx |
LPS-27 Series Industrial Duty LVIT Linear Position Sensor for Factory Automation by Harold G. Schaevitz Industries LLC Bloomfield Hills, Michigan, Harold G. Schaevitz Industries LLC (HGSI) has expanded its sensor product offering by adding a line of ILPS-27 Series Inductive Linear Position Sensors using LVIT Technology; contactless devices designed for factory automation and a variety of industrial or commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position, and packaging equipment. With their compact design, superior performance, and excellent stroke-to-length ratio, ILPS-27 sensors are ideal for both industrial testing laboratories and OEM applications.ILPS-27 Features: • Contactless operation prevents wear out from dither or cycling • 10 Ranges from 50 to 450 mm (2 to 18 inches) • Excellent stroke-to-length ratio • 27 mm (1.05 inch) diameter anodized aluminum housing sealed to IP-67 • Radial cable exit version comes with swivel rod eye ends • Axial termination versions with either M-12 connector or cableOperating from a variety of DC voltages, the ILPS-27 series offer a choice of four analog outputs and all include HGSI’s proprietary SenSet™ field recalibration feature.The ILPS series also includes the ILPS-19 series for applications where a shorter length and smaller diameter body is required and the spring loaded ILPS-18S for applications where the probe cannot be hard fixed to the measurand. Technical data sheets and additional information can be found at www.hgsind.com. |
NEW PRODUCT: Large Atomizing Spray Nozzle Covers 360 Degrees EXAIR’s 1/2 NPT internal mix 360 degree hollow circular pattern atomizing spray nozzle atomizes fluid and sprays away from the nozzle in all directions, up to 13 feet in diameter. These nozzles are ideal where a liquid application is needed in a broad area, such as dust suppression, humidification and cooling. They can also be used to coat the inside of large diameter pipe or duct. By combining liquid and compressed air inside of the air cap these nozzles produce the finest mist of atomized liquid that can be easily adjusted to meet the needs of your application. These spray nozzles provide liquid flows from 10.8 to 150 gallons per hour.With EXAIR’s atomizing nozzles, you can coat, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 300 centipoise. They are commonly used with water, light oils, rust inhibitors, chemicals, paints and dyes.The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are available with 1/8 NPT, 1/4 NPT and 1/2 NPT connections and in a variety of sizes and shapes to meet your needs. Patented No Drip versions, ideal for saving expensive liquids and preserving product finishes, are also available. All models are adjustable, come with our 5 year Built to Last Warranty and are CE compliant. 1/2 NPT Internal mix 360 degree hollow circular pattern spray nozzles ship from stock and are $681. For more information contact:EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/lgat.htm |
ANVER Corp Announces New Vacuum Powered Lifter-Tilter with Manual Rotation for Tubing Compact, Below the Hook End-Effector Ideal for Lifting, Tilting, and Rotating Non-Porous Cylinders small-tilter-rotator-WEB–medHudson, MA/ — The new Vacuum Lifter-Tilter with Manual Rotation is being introduced by ANVER Corporation, a leader in vacuum handling technology. The below-the-hook ETL10M2-OCMR is light and compact allowing one person to safely and easily position and change the orientation of non-porous cylinders, such as pipes or other tube-shaped objects.Featuring a 90 degree power tilt operation with a 360 degree manual rotation, the orientation of a load can be changed quickly and easily during a process without disruption. Standard features include fully integrated pendant controls on the handlebar, vacuum gauge, ergonomic handlebar, safety lights, and VLS-08 audible vacuum leakage warning system that sounds an alarm if a slow vacuum leak is present and the vacuum level drops to a pre-determined set point.The ETL10M2-OCMR can achieve effortless maneuverability for loads weighing up to 100 lbs. at 24 In. Hg. Min. for cylinders with a 9- 15 inch diameter. This vacuum lifter with tilt and manual rotation comes in an electric-powered model using 115V/1PH/60Hz, 7 AMPs or an air-powered model. Contact ANVER for further information and application requirements. ANVER Corporation |
JORC Releases LOCATOR-EV Air leak detector The LOCATOR-EV is a light and easy to operate ultra-sound leak detector. It reliably and accurately detects air leakages from distances up to 30 ft., even during operating hours in a noisy factory.Air leaks are a concern for anyone operating a compressed air system. The average plant (with no formal leak management program) will have air leaks that can waste up to 30% of the generated compressed air.How it works: An air leak creates turbulence or friction which produces high frequency ultrasonic waves which are normally higher than 20kHz. This typically exceeds the range of human hearing levels, especially in a noisy environment, like a factory.The ultrasonic waves travel in air and are highly directional. This directional aspect allows the LOCATOR-EV to isolate the ultrasonic sound amongst other external factory sounds. Just point the LOCATOR-EV to your compressed air system pipework and the LOCATOR-EV will prove very effective and efficient in locating your air leaks. Using the LOCATOR-EV will help you: Find your air leaks, so you can fix them! JORC Industrial LLC 1146 River Road |
| ROSS Controls introduces its new RSe Series Sub-base Mounted Valves for safety exhaust (dump) and safe cylinder return applications up to Category-4, PL e  The safety function of the 3/2 RSe Series valve is to supply compressed air to a machine/system until signaled to shut off and exhaust any pneumatics energy from downstream of the valve. Thus, reducing the hazards associated with the presence of residual pneumatics energy during employee access and/or production-related minor servicing.The safety function of the 5/2 RSe Series valve is to control the direction of air flow into and out of a double-acting cylinder or other pneumatic actuator for normal operation, and to return the cylinder/actuator to its home “safe” position whenever a fault occurs within the valve.The new ROSS RSe Series control-reliable double valves are redundant valves designed for external monitoring to meet the needs and requirements of safe air supply/exhaust (3/2 Valves) and safe cylinder return (5/2 Valves) applications for machinery with pneumatic controls. The RSe Series valves have an overall function of a single solenoid pilot-operated, spring return valve, and incorporate a well-proven spool design for a reliable, rapid response Two PNP proximity sensors are included, one for each valve, to be monitored with an external monitoring system. These valves are offered in port sizes ranging from 1/8” through 1/2”.Additionally, these pending BG Certified valves will be included in the SISTEMA Library data available for download from the ROSS website. For more information on ROSS CONTROLS |
Gen4 Ionizing Point Delivers Precision Static Elimination EXAIR’s new Gen4™ Ionizing Point delivers a high concentration of positive and negative ions to neutralize static electricity without requiring compressed air. This compact and shockless static eliminator is the ideal way to eliminate static electricity problems occurring in small spaces. They are ideal to keep small parts or products separate or from sticking to other surfaces. Gen4 Ionizing Points can protect sensors, eliminate improper readings of sensitive electronics, keep powder filling nozzles clear of clogs and prevent jamming, tearing or dust attraction on slitting, winding, rewinding, ink jetting and silk screening applications.The Gen4 Ionizing Point has undergone independent laboratory tests to certify it meets the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. It is also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, a replaceable emitter point, integrated ground connection and electromagnetic shielding.A new 115V/230V selectable voltage power supply has been designed to operate the Gen4 Ionizing Point. Visit EXAIR.com to see the entire static elimination product line including static eliminating Gen4 Super Ion Air Knives, Gen4 Super Ion Air Wipes, Gen4 Ion Air Cannons, Gen4 Ion Air Jets and a handheld Gen4 Ion Air Gun for manual operations. Price is $211. For more information contact:EXAIR Corporation 11510 Goldcoast Drive Cincinnati, OH 45249 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/ip_pr.htm |
NEW PRODUCT:Soft Grip Back Blow Safety Air Gun For Cleaning Inside Diameters EXAIR’s new Soft Grip Back Blow Safety Air Gun delivers a blast of air to effectively blow debris and liquids from pipe or hose inside diameters, channel, bores, holes, internal threads and other internal part features. The ergonomic design of the air gun keeps the operator’s hand in a comfortable position so it can be used for hours of continuous use without fatigue.An array of holes on the Model 1006SS Back Blow Air Nozzle provides a forceful back facing 360-degree airflow to clear out coolant, chips and light oils from machining processes. This nozzle prevents blowing chips further into a part, tube or pipe and eliminates any safety hazard created by blowing debris out the far end of a pipe or tube. Air consumption is only 22 SCFM at 80 PSIG with a low sound level of 80 dBA. The nozzle is manufactured with a small profile and will fit inside openings as small as 7/8″. It is effective on diameters up to 4″. It is constructed of type 316 stainless steel to provide durability and superior resistance to corrosion. The airflow that exits the nozzle is quiet and cannot be blocked which complies with OSHA standards 29 CFR 1910.95(a) and 1910.242(b). It is also CE compliant.Since airflow is directed back toward the operator, personal protective equipment is recommended. Chip Shields to protect the operator from the exiting debris are available. Extension pipes from 12″ to 72″ are stocked to provide necessary reach for longer tube and pipe clean out. A variety of Safety Air Guns are available including the Precision, Heavy Duty and VariBlast Compact Safety Air Gun. Prices start at $176.For more information, contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/qtr_bbsag.htm |
SCHUNK has extended its series of digitally controllable magnetic grippers with the compact SCHUNK EGM-M monopole gripper. Features of the gripper: -With compact dimensions of 26 mm x 98 mm, it is still precise and powerful -Even though it’s small, the EGM-M is suitable for handling parts weighing up to 10 kg -Since its magnetic field reaches to the outer edge, there are no interfering contours -It can be positioned anywhere on the workpiece, and can be combined with larger units.No compressed air or vacuum is required to actuate the monopole grippers As with all the SCHUNK EGM magnetic grippers in this series, the monopole grippers operate with energy-efficient electro-permanent magnets – they do not require compressed air or vacuum. Only a short current pulse for 300 ms is required for actuation and deactivation. Since no energy supply is required in activated condition, the parts remain securely gripped even in the case of an emergency stop or a sudden loss of power.Flexible and adjustable to handle a variety of workpieces The SCHUNK EGM-B bi-pole gripper was designed for handling heavy and complex ferromagnetic parts. Available with one, two, or four pole pairs in different arrangements, along with pole extensions allow adjustment of individual handling objects.The range of SCHUNK EGM grippers have a gripping force of 1.2 and 22.5 kN, and is designed for parts weighing a maximum of 147 kg, with a material thickness starting from 3.5 mm. For handling of thin sheets, the gripping force can be reduced in eight stages with an additional control unit. The EGM-M magnetic gripper can be used in confined spaces due to its compact dimensions, and in a maximum ambient temperature of 40° C the activation or deactivation time amounts to 300 ms.
|
New! DVP Proportional Valves Clippard’s next-generation DV Series valve is now available in a 2-Way proportional control version! The new DVP Series provides a high degree of control and customization. Available in manifold mount or #10-32 mounting styles, the DVP provides fast response times and exceptionally long life. Clippard DVP Series High Flow Proportional Control Valves Features:-Industry standard for leak-free operation -Over 1,000,000,000 cycles -Extremely low hysteresis -Fast response time -Large flows in a small, sleek design -Low heat rise/low power -Robust stainless steel “spider” flat armature spring -CE, RoHS compliantClippard’s newest DVP series proportional solenoid valves are precision-built 2-way control valves, utilizing Clippard’s unique valving principle. This powerful series was designed as the next generation of Clippard’s best-selling original EV line. With a lifespan of over a billion cycles; a solid, compact design; and extremely high flow rates, these valves are suitable for many applications across numerous industries.The DVP series provides air or gas flow control and varies the output flow based on the current input to the solenoid. The consistent gain (see chart) of this valve provides a high degree of control. Controllability and overall value are the main features of the DVP series. The valve may be controlled using DC current, open or closed-loop control, and even PWM (pulse width modulation) to cover a large range of applications.
|
ROSS CONTROLS® Announces New M35 Series Modular Double Valves (TROY, MI) – ROSS Controls® introduces its new M35 Series safety exhaust (dump) valve for Category-4, PL e machine guarding applications. The safety function of the M35 Series valve is to shut off supply of pneumatic energy and to exhaust any pneumatic energy from downstream of the valve. The ROSS® M35 Series double valve includes the 3/2 normally closed function, dual poppet design, and are based on the proven technology of the SERPAR® Crossflow family of double valves.This new M35 Series control-reliable double valve is designed with external monitoring for safe redundant operation, and is available with or without EEZ-ON (soft start) function. The EEZ-ON® (soft start) module option allows slower build-up of pressure during start-up. The M35 Series valve is enhanced with a modular mounting design, allowing flexible air entry system assembly. Additionally, this pending BG Certified valve will be included in the SISTEMA library data that is downloadable from the ROSS website. For more information on ROSS® M35 Series double valve with soft start capability, contact your local ROSS distributor, ROSS’ customer service or visit ROSS’ website.ROSS CONTROLS 1250 Stephenson Highway Troy, MI 48083-1115 248-764-1800 www.rosscontrols.com |
ANVER Corporation, a leader in vacuum handling technology, introduces its innovative Vacuum Control Module (MCU, micro control unit) that combines safety and efficiency for its vacuum lifters. The modern safety features conveniently control all vacuum pump functions on the front panel and is fitted with a standard 95+ decibel audible vacuum leakage warning system and color-coded safety lights to increase safety and reduce danger. The Vacuum Control Module (MCU) houses all the required vacuum generator controls in one sturdy unit, including safety indicator lights and the VLS-03E audible vacuum leakage warning system. The VLS-03E sounds an alarm if a slow vacuum leak is present and the vacuum level drops to a pre-determined set point. All gauges, safety lights, and power switches are mounted on the front MCU for efficiency, easy visibility and accessibility.Additional safety features include a dual redundancy safety interlock Lock-out Lifting Bail for horizontal lifters where the bail is the master, this means that the pendant has attach and release buttons that lockout when the lifter is in the air and the bail is in tension. The pendant interlock will not change the vacuum state until the lifter has been safely placed on the ground.A vacuum transducer is used through an A/D converter and a Pic MCU to control the Lock-out Lifting Bail and two button pendant safety control to monitor atmospheric pressure and compensate to insure adequate vacuum at altitude.ANVER Corporation 36 Parmenter Road Hudson, MA 01749, USA Phone: +1-978-568-0221 North America Toll Free: 800-654-3500 Fax: +1-978-568-1570 |
NEW PRODUCT:Patented No Drip Atomizing Spray Nozzle Covers 360 Degrees EXAIR’s patented 1/4 NPT No Drip internal mix 360 degree hollow circular pattern atomizing spray nozzle atomizes fluid and sprays away from the nozzle in all directions. These can provide a smooth, even coating on the inside diameter of a pipe or similar ductwork. They are also effective for operations where mist over a broad area is needed, such as dust suppression, humidification and cooling. They combine liquid and compressed air inside of the air cap to produce the finest mist of atomized liquid that can be easily adjusted to meet the needs of your application. These spray nozzles provide liquid flows from 1.6 to 14.7 gallons per hour with liquids up to 300 centipoise.EXAIR’s patented No Drip valve assembly stops liquid flow when air pressure is shut off which stops post spray drip which can ruin product finishes on painted or coated surfaces. No Drip Atomizing Spray Nozzles are also an important tool for saving expensive coatings and chemicals or conserving water. They can be used with water, light oils, chemicals, rust inhibitors, paints & dyes.The stainless steel construction of these No Drip atomizing nozzles adds to their durability and corrosion resistance. EXAIR No Drip atomizing nozzles are available with 1/8 NPT, 1/4 NPT and 1/2 NPT connections and in a variety of sizes and shapes to meet your needs. All models come with our 5 year Built to Last Warranty and are CE compliant. No Drip internal mix 360 degree hollow circular pattern spray nozzles ship from stock and start at $383.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/ndsmat.htm |
Cleanroom Gripper for Small to Medium Part Handling The EGS from SCHUNK is perfect for the gripping of small to medium sized workpieces with flexible force and high speed in clean environments such as assembly, testing, laboratory and the pharmaceutical industry.It is digitally activated by binary signals for easy start up and rapid integration into existing facilities and is extremely fast to achieve the maximum number of cycles per minute. The EGS is very sturdy, making it almost wear-free while also supplying high gripping forces for every cycle.The EGS has autonomous gripping and swiveling, adjustable gripping force, and freely adjustable angle of rotation. It is energy efficient due to the use of an electric power train, and is very simple to use with no programming costs.www.us.schunk.com |
Alliance Sensors Group is pleased to announce the continued success and expansion of the ME, MR, MHP, and now the SS-7 Series Linear Position Sensors Used to measure the ram position of hydraulic and pneumatic cylinders in industrial, mobile, or subsea applications. With NO MAGNET REQUIRED the installation and cost of ownership is dramatically reduced without sacrificing accuracy specifications. The ME (embedded version) , MR (port-mount version), MHP (port mount 25mm hex housing) and SS-7 (Subsea port-mount) Series fit into a gun-drilled cylinder in the same way a magnetostrictive sensor would be installed but without the counterbore necessary for the magnet. Features: ME/MR/MHP sensors use a simple coil design rather than “time-of-flight” technology or resistive film. They are based on a patented contactless inductive sensing technology that employs a solid probe construction style which requires only a simple conductive tubular target or a small diameter deep hole gun drilled in the cylinder rod for operation rather than needing a permanent magnet ring or some other type of special target. The ME/MR/MHP/SS-7 Series sensors can withstand intense shocks and vibration, and operating temperatures up to 85 C for standard products and 125 C for custom units. Resembling a magnetostrictive sensor with its sensor head and male o-ring port threads, an ME/MR/MHP/SS-7 sensor has a shorter stroke-to-probe length ratio and can thread into the same o-ring bosses (either SAE J1926-8 or ISO 6149-1 M18) that accept a magnetostrictive sensor. For those applications where an ME/MR/MHP/SS-7 is replacing an existing magnetostrictive sensor, the magnet ring can usually be left in place without affecting the performance of the sensor. The IP-67 sealed housing uses no trimmer pots for setting Zero and Full Scale. Instead, ASG’s proprietary SenSet™ calibration feature permits the user to match the analog output of the sensor to the motion of the actuator or cylinder on a stand-alone basis rather than the user having to scale the sensor’s basic output in an associated control system.
|
 ASCO Introduces the Numatics 502 Series Directional Control Valves Featuring High Flow Rates and Widest Range of AccessoriesASCO has introduced the Numatics 502 Series pneumatic directional control valves with high flow rates and the broadest range of components and accessories. The 502 Series joins a family of high-performance sub-base mounted directional control valves (501 Series and 503 Series) that have higher flow rates; less power consumption; and exceptionally easy on-site installation, configuration, and modification. “The ASCO Numatics 502 Series valves have up to 30% greater flow than the products they replace — making them ideal for design engineers desiring a more compact valve, or for those who want to increase a machine’s work capacity using the same size valve,” said Andy Duffy, vice president, sales, Americas, ASCO. “In addition, these new directional control valves offer the greatest range of pneumatic ‘sandwich’ components (pressure regulators, pressure shut off, exhaust flow controls) that allow an almost infinite number of configurations based on the customer’s requirements.” The modular 502 Series (18 mm) is a general purpose industrial valve for automation and piloting applications in the automotive and tire, food and beverage, pharmaceutical, and packaging machinery industries. The valve has the flexibility of meeting the ISO 15407-2 standard while maintaining its high-flow characteristics. In addition, the performance of the 502 Series’ dual-pressure sandwich regulator, plus the accuracy of the company’s Numasizing engineering tool, allow the end user to dramatically reduce compressed air and power consumption. The valve is designed for use with ASCO’s next-generation Numatics G3 fieldbus electronic platform that is easy to assemble, commission, and maintain. “Whether the customer requires ISO certification or a standard product, the 502 Series is optimized to provide the greatest combination of reliability, spool technology, electrical connections, and sandwich components on the market today,” said Duffy. For more information, contact ASCO by phone at 1-888-686-2842 or 1-248-596-3300, by e-mail at asconumatics.insidesales@emerson.com, or visit www.asco.com.
|
NEW PRODUCT:Measure Air Usage Wirelessly on your Network EXAIR’s new Digital Flowmeters with wireless capability use a Zigbee® mesh network protocol to measure and monitor your compressed air use, trends, and historical data. Each meter has a range of 100ꞌ (30 meters) and transmits data to an Ethernet connected gateway. Each meter and gateway are configured for security and have 128 bit encryption for the wireless transmissions. Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks and optimizing air use.Each meter ships with the wireless to Ethernet gateway, power supplies and installation tools. Compressed air monitoring is made easy by downloading the EXAIRlogger™ software for the Digital Flowmeters. With this software customers can graph the data, aggregate it to identify air use trends, or use it with other analytic software to effectively monitor air and save money. Airflow values are expressed in Standard Cubic Feet per Minute or Cubic Meters per Hour.Digital Flowmeters with wireless capability for schedule 40 iron pipe are now available in sizes 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch and 4 inch. They are CE and RoHS compliant and can also be ordered for schedule 80, 10S or Type L copper pipe. Prices start at $1308.00.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/wdfm.htm |
| Festo MSE6-E2M Energy Efficiency Module Now Compatible with Ethernet/IP and PROFINET
HAUPPAUGE, NY, First introduced in 2015, the MSE6-E2M (E2M) intelligent service unit is now compatible with Ethernet/IP and PROFINET communication protocols – significantly expanding potential applications in North America. E2M units can pay for themselves in less than a year from the energy savings accrued. The E2M automatically shuts off the air supply to a machine when in standby mode, thus reducing energy consumption. E2M performs typical monitoring functions, making system pressure and flow information available in real time which enables faster response to compressed air leaks. The E2M features a solenoid valve integrated with a pressure and a flow sensor in one compact package. These units flow up to 5,000 liters of compressed air per minute, program easily, and can quickly connect to Festo MS series air preparation units. Automatically go into standby mode to save energy Automatic leakage detection A wealth of data and Industry 4.0 (IoT) For more information on the E2M compressed air energy saving unit, call 800-993-3786 and visit www.festo.us. |
ELP Electric Linear Module from SCHUNK The SCHUNK ELP can be adjusted in two simple steps making it the most user friendly electric linear module on the market! The end positions can be mechanically adjusted with a screw and the speed of extension and retraction is adjusted using rotary switches on the side of the unit.Speed can be automatically adjusted, depending on extension weight and no shock absorber adjustment is necessary, because the drive automatically regulates the brake process. The ELP is practically wear-free with a long service life and low maintenance cycles. The control and power electronics are directly integrated into the module, and can be controlled by a fieldbus distributor or through digital signals.www.us.schunk.com |
NEW PRODUCT:High Lift Chip Trapper Moves Liquid Farther and Higher EXAIR’s new patented High Lift Chip Trapper™ offers a fast, easy way to clean coolant sumps, waste oil pits or wells. High Lift Chip Trapper removes the solids such as chips, swarf and shavings out of used coolants and other liquids with up to 15 feet of lift or 20 feet of horizontal vacuum. Extend the life of coolants and eliminate the worry of waste oil solids damaging equipment.Metal chips in a machine sump can block the intake of the coolant pump which reduces the coolant flow and causes heat-related damage to the expensive parts and tooling. Regular cleaning of the sump with a High Lift Chip Trapper eliminates this problem, the lost production and downtime.The compressed air powered High Lift Chip Trapper vacuums the dirty liquid into the included drum, trapping all the solids in a reusable filter bag. With a turn of the flow valve, clean liquid pumps back out. There are no motors or impellers to clog or wear out. Safe operation is assured with built-in pressure/vacuum relief and an automatic safety shutoff to prevent spills or overfilling.The Model 6190 High Lift Chip Trapper is available in 30, 55 and 110 gallon capacities. Systems include the stainless steel two-way pump, directional flow valve, drum, lever lock drum lid, shutoff valve, 10′ vacuum hose, 20′ compressed air hose, chip wand, (2) filter bags and a drum dolly. High Lift Chip Trappers and all industrial vacuums are CE compliant. Price starts at $1617.00. For more information contact: |
Fabco-Air, Inc. Releases New H-Series Stainless Steel, Disposable Cylinder Product Line! Gainesville, Florida – As previously announced, Fabco-Air, Inc. recently acquired the Humphrey Stainless Steel, Disposable Cylinder product line! This also included the Volume Chamber product line as well as all relevant cylinder accessories.Subsequently, Fabco-Air is pleased to unveil the H-Series product line. The H-Series is completely interchangeable to the previous version offered by Humphrey. In an effort to make the transition as easy as possible, the Fabco-Air H-Series part numbers are exactly the same as the traditional Humphrey part numbers.The H-Series is available in 8 different bore sizes: -½” -¾” -1-1/16” -1-1/4” -1-1/2” -1-3/4” -2” -2-1/2”Like the other Non-Repairable cylinder line from Fabco-Air (the F-Series), the H-Series is also offered with a stainless steel piston rod as a standard feature. The H-Series is available on the Fabco-Air Product Configuration Program. H-Series cylinders can be constructed and/or deconstructed via this program. The program deliverables include: List Prices – Maximum Buildable Quantity – Applicable Accessories – Etc. For more information about this product line or any of Fabco-Air’s products, call (352) 373-3578 or visit www.fabco-air.com. Fabco-Air, Inc. |
NEW PRODUCT: Small 316SS Cabinet Coolers With Digital Control Resist Heat and Corrosion EXAIR’s new Small 316 Stainless Steel Cabinet Cooler® Systems with ETC (Electronic Temperature Control) keep electrical enclosures cool with 20°F (-7°C) air while maintaining the NEMA 4X rating of the enclosure and resisting the heat that could adversely affect the internal components. The wear, corrosion and oxidation resistance of Type 316 stainless steel assures long life and maintenance free operation. Cooling capacities up to 550 Btu/hr. are ideal for small enclosures and heat loads. Models with higher cooling capacities up to 5600 Btu/hr. for NEMA 12, 4 and 4X enclosures are also available.The ETC accurately maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics. It permits just enough cooling for the electronics without going so cold as to waste compressed air. A digital LED readout displays the temperature of the electrical enclosure (°F or °C), then displays the user temperature setting when pressing the “push to set” button. When that setting is exceeded, the Cabinet Cooler System is activated. Cabinet Cooler Systems include an automatic drain filter separator to ensure no moisture passes to the inside of the electrical enclosure.Small 316 Stainless Steel Cabinet Coolers are available with cooling capacities of 275 and 550 Btu/hr. and are UL Listed and CE compliant. There are no moving parts to wear out. Applications include cooling control panels used in food processing, pharmaceutical, foundries, chemical processing and other corrosive locations. Prices start at $1567.00.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/sm316cc.htm |
| A breakthrough innovation for digitalised pneumatics Festo exhibits a world premiere in Hanover: The Festo Motion Terminal  The machinery and plant construction industry is faced with the challenge of catering to the increasing consumer demand for individually adaptable products at affordable prices. Along with the continuing need for mass-produced goods for the world’s population, which will soon reach the eight-billion mark, demand is also growing for small-series production down to lot size 1. Digitalisation in the course of Industry 4.0 is providing the necessary key technologies. With the Festo Motion Terminal, Festo has now for the first time developed a universal, programmable platform for highly flexible and adaptive automation with digitalised pneumatics.With the Festo Motion Terminal, Festo has achieved a technological breakthrough by merging hardware and software to produce a digital valve. Over a three-year development period not only an intelligent pneumatic automation platform for Industry 4.0 was created, but in fact an entirely new solution space for the manufacture of products for the future that we cannot even conceive of today.A revolution in pneumatics A wide variety of valve functions can now be programmed and addressed via apps. The Festo Motion Terminal combines the functions of over 50 individual components: this greatly simplifies the engineering process and enables numerous hardware components to be dispensed with. Machinery and plant manufacturers can benefit from entirely new designs for platforms and modules, and plant operators can gain a competitive advantage thanks to flexible and adaptive systems, data transparency, communication ability, extreme process reliability and simpler operation of complex machinery. Alfred Goll, Spokesman of the Management Board of Festo AG, says: “We have created an automation platform that integrates all functions, so that adaptive and flexible production is made economically feasible – and we have revolutionised pneumatics in the process!”Project manager Dr. Julia Duwe, Head of Future Motion Solutions Management, explains: “In technological terms, this entirely new platform combines mechanics, electronics, control engineering and software. With a choice of various motion apps, clients have the possibility of both registering the condition of their systems in real time and of modifying their functions, thereby flexibly adapting to the demands of their customers. The Festo Motion Terminal ensures consistent process quality and transparency in the construction and operation of production plants, provides flexibility throughout the machinery life cycle and reduces costs arising from faults.” Increasing speed, simplifying modifications, reducing complexity Focus on user-friendliness Efficient and sustainable The Festo Motion Terminal is a door-opener and enabler for companies that now want to make their production fit for Industry 4.0. Festo has established two entirely new dedicated assembly lines to accommodate the expected high demand for this product. |
SHS Manual Tool Change System The new SCHUNK SHS manual tool change system is perfect for flexible production with a large range of products, where reliable, manual tool changing is required.The SHS has integrated pneumatic feed through for a safe power supply for tool handling and optional electric feed through. The locking lever doesn’t need to be rotated, only lifted forward, which allows it to be easily operated, even in confined spaces.The SHS has six unit sizes, for optimal size selection and a broad application range. It also has an ISO flange pattern for easy assembly to most types of robots without needing additional adapter plates.www.us.schunk.com |
Tolomatic food-grade servo actuator designed for food and beverage processing. New options provide superior actuator protection in sanitary washdown environments. HAMEL, Minn.– The Tolomatic IMA electric linear actuator, the company’s most powerful integrated servo motor rod actuator, is now available with a food-grade white epoxy coating and stainless steel components for washdown applications in the food and beverage industry. The compact, durable IMA actuator series integrates a servomotor and a ball or roller screw for long service life to meet many different budgets. The IMA actuator’s unique integrated motor design is well suited for applications such as slicing control, pressing, valve control and volumetric filling. “Many applications within the food and beverage industry require high-force electric actuators that can withstand the rigors of sanitary washdown,” said Aaron Dietrich, marketing manager, Tolomatic, Inc. “New IMA actuators with a food-grade white epoxy coating and ingress protection rating of IP67 are an economical alternative to custom stainless steel actuators. With a wide range of available modifications, the IMA can be tailored to virtually any food and beverage application.”Available in four sizes, the IMA line of integrated servo motor rod actuators features stroke lengths from three to 18 inches (76.2 to 457.2 mm) and peak thrusts from 200 to 6,875 pounds force (890 to 30,594 N) at speeds up to 24 inches per second (610 mm/sec).With its integrated servomotor, the IMA actuator also is shorter for a given stroke length than other types of electric rod actuators. Its patent pending design allows for easy re-lubrication of the screw without disassembly, increasing service life compared to other rod actuators without this feature. The IMA offers seamless integration with Rockwell Automation Kinetix® platform with approved custom motor files (CMF/BLB) for the PLC and integrated motor actuator.Available modifications In addition to food-grade white epoxy, a variety of modifications to the IMA expand the range of operating environments, including: -Food-grade greases to provide the lubrication actuators require and comply with international food/health & safety regulations. The IMA actuator series features a hollow-core rotor design that allows the nut of the screw to pass inside the rotor, creating a very compact package. This can decrease overall actuator length compared to standard actuators due to the elimination of a separate motor, motor mount and gearbox. In addition, the motor features skewed stator windings to minimize cogging of the motor and provide more efficient motion with improved force repeatability. Tolomatic’s sizing and selection software makes selecting an IMA actuator easy. Tolomatic’s new IMA integrated servomotor actuator series is now available with food-grade white epoxy coatings for food and beverage and washdown applications. Contact Tolomatic, 3800 County Road 116, Hamel, Minn. Phone: 763-478-8000 or 1-800-328-2174. Website: www.tolomatic.com. |
NEW PRODUCT: New Anti-Static Ion Air Cannon is CE, UL and RoHS Certified EXAIR’s new Ion Air Cannon eliminates static electricity and cleans at distances up to 15 feet, with no moving parts. It is ideal for bench-tops, machine mounting, and those “hard to reach” spaces that require a concentrated flow of static eliminating ions. This engineered product has undergone independent laboratory tests to certify it meets the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. It is also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, a replaceable emitter point, integrated ground connection and electromagnetic shielding.The Ion Air Cannon incorporates EXAIR’s patented Super Air Amplifier that minimizes compressed air use by inducing surrounding airflow at a ratio of 22:1. The unique amplified airflow carries the ions to the target, making it possible for the Ion Air Cannon to eliminate static charges in less than a half second. Air volume and velocity are infinitely controllable from a “breeze” to a “blast” to gently wipe or forcefully blow away contaminants.The Ion Air Cannon comes complete with a sturdy stand that incorporates a swivel adjustment for directing the airflow. A hose or tube can be easily connected to the air intake to draw air from another area. The electrical ion source is shockless and there is no radioactive element. A new selectable voltage power supply has been designed to operate the Ion Air Cannon. Visit EXAIR.com to see the entire static elimination product line. Applications include bag opening, sheet separation, cleaning molded parts, pre-paint dust removal, package cleaning and container neutralization. Price is $588.For more information, contact EXAIR Corporation: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/iac.htm |
WABCO Pioneers Breakthrough Air Suspension Technology for Premium Electric Sport Utility Vehicles; Remains Industry’s Sole Supplier of Electronically Controlled Air Supply Systems for Electric Passenger Cars BRUSSELS, Belgium, WABCO Holdings Inc. (NYSE: WBC), a leading global supplier of technologies and services that improve the safety, efficiency and connectivity of commercial vehicles, today announced that for the first time it will supply a major German passenger car maker with WABCO’s breakthrough electric Twin Compressor air suspension technology. WABCO is expected to equip all of the customer’s premium electric sport utility vehicles (SUVs) in global series production starting in late 2018.This new long-term supply agreement further strengthens WABCO’s leadership position as the passenger car industry’s sole supplier of electronically controlled air supply systems for electric-powered passenger vehicles. WABCO’s air supply system on electric vehicles lowers the body at high speeds, reducing aerodynamic drag and, therefore, improves energy consumption. It also enables intelligent lowering of the vehicle when parked to optimize inductive electric charging, eliminating need for cable connections.WABCO’s pioneering engineering for premium electric SUVs includes its compact air supply with built-in Twin Compressors, resulting in an innovative high-performance air supply system. This industry-first invention differentiates by increasing rate of airflow by 40 percent and by augmenting maximum air pressure up to 15 percent alongside superior acoustic performance. WABCO’s compressors also start electronically, rather than electro-mechanically, which softly reduces the starting electric current by 50 percent. In addition, WABCO’s technology operates virtually in silence, another differentiator that eliminates noise and enables quiet riding in luxury passenger vehicles.“Automakers are continuing to emphasize electrification, and we see a trend toward a rising number of electric vehicle models around the world, which call for increasingly efficient air compression at high pressures while retaining energy,” said Philipp Helmich, WABCO Vice President, Original Equipment Sales and Key Account Management. “Further demonstrating WABCO’s technology leadership, our new Twin Compressor is at the heart of tomorrow’s air suspension systems for premium electric passenger cars and sport utility vehicles.” WABCO has further differentiated its Twin Compressor system with an optional boost function, which increases the air reservoir’s energy capacity over threefold. This means the size of the reservoir can be significantly decreased, which helps to reduce vehicle weight. Press Photo / Caption: WABCO’s breakthrough Twin Compressor technology enables an innovative high-performance air supply system. For more information, visit www.wabco-auto.com. |
New from Pisco. The Type JSD Slot-Head Speed Controller reduces unwanted adjustments, and ensures settings are maintained during operation. Based on the design of Pisco’s Type JSC Speed Controller, the Type JSD does not include the external needle needed to make speed adjustments. Instead, to ensure consistent speeds, a separate screwdriver is required to make any adjustments.The absence of a built-in tool has resulted in a space-saving design: the height of this new controller to approximately 2/3 the height of its conventional counterpart.The JSD is available in an Elbow type with a 360º rotatable x-axis resin body and a Free type with a 360º rotatable x- and y-axis resin body. Both operate with air as a medium and feature operating pressure ranges from 14.5 – 130 psi, check valve opening pressure of 7.25 psi and operating temperature ranges from 32 – 140ºF.The Type JSD is ideal for use in packaging and factory automation applications. For more information, visit http://www.pisco.com/news.htm, or contact PISCO USA, INC., 463 W. Wrightwood Ave., Elmhurst, IL 60126, Email: inquiry@pisco.com, Phone: (630) 993-3500.
|
ES05 Valve – Simple Solution for Elementary Pneumatics Aventics ES05 pneumatic directional control valves launchedLexington, Kentucky, Aventics now offers a clever, economic and user-friendly solution for applications with standard requirements in packaging and industrial automation. Designed specifically to reduce the number of components, assembly is completed with one single tool, making life easier for distributors, machine manufacturers and system integrators with the added benefit of reducing the risk of faults.Providing custom, cost-effective solutions for customers’ standard requirements is the approach pursued by Aventics with the newly developed Essential Valve System series. Paul Cleaver, chief executive officer at Aventics, explains what led to this development: “Our customers asked for a simple, components reduced, flexible, and efficient standard valve – tailored to their application.” The new series therefore focuses on ease of handling for distributors, machine manufacturers and system integrators. They configure their customized solution online from a set number of readily available components. “Assembling a valve system has never been faster or easier,” explains Paul Cleaver.Aventics opted for a modular system for the ES05 with only 25 components. Orders are supplied as complete assembly kits. All components are unique which makes incorrect installation virtually impossible and only one tool is required for the job. All fittings are of the same type and tightened with the same torque, which further simplifies assembly and prevents errors. The portfolio also includes the Essential Test Box. With this test box the correct function and leak-tightness of the valves can be tested, before installing the valve systems. This is particularly useful for volume users and Aventics distributors. If a customer prefers, Aventics can deliver factory assembled and tested ES05 valve manifolds. The valves come in a robust housing made of high-performance polymers and are especially stable and compact, and provide flows up to 0.61Cv. Users connect the end and base plates (available with metric or inch ports) and can extend the system in pairs up to twelve single or double solenoid valves. The valves are controlled via single wiring with a type CI connector according to ISO 15217, a D-Sub connection with 25 pins, with AES valve electronics from Aventics, or an integrated IO-Link interface. AES supports all common fieldbus and Ethernet protocols. If necessary, the pilot coils can also be turned at a later stage to realize mixed connection configurations. With a switching time of under 35 milliseconds for all valve functions, highly dynamic action is guaranteed for short cycles. With single wiring, the ES05 complies with protection class IP65, so the valve system can also be installed in decentral locations, even in environments exposed to splash water. All other connection types comply with protection class IP50. An online configurator can help with design, documentation and drawings. |
Festo Automated Ball Valves – World Class Quality, Delivery, and Global Support Automated ball valves are the first in a new generation of process valve solutions from Festo.Festo introduced today a competitively priced, single sourced automated ball valve solution for process applications that offers fast delivery, world class quality, and global support. This is the latest entry in a Festo development initiative of next generation actuators, sensors, and other accessories. Festo automated ball valves feature the company’s new VZBE ball valves, DFPD quarter turn actuators, VSNC NAMUR pilot valves, and the SRBC family of open/close sensor boxes. For proportional flow applications, Festo offers the feature-rich, yet cost effective, CMSX digital positioner. End users, OEMs, and engineering companies simply provide the Festo Customer Solutions group or Festo distributors with the requirements of the valve. Festo sizes the components and at the customer’s request provides all the pieces in a single box or ships a fully automated valve assembly ready for installation and wiring. A unique part number will be issued for ease of reordering and field support.The VZBE family of NPT ball valves is available in a two-way or three-way design. With a 316 stainless steel body and Teflon seats, these valves are rated up to 1,000 psi and 400° Fahrenheit (200° C). For sanitary environments, Festo also offers the 3A approved VZBD ball valve family with tri-clamp and welding connections. And for fire-safe applications, the API607 approved VZBF is available with ANSI flange connections. The key customer advantages of the new Festo ball valve solution include: For more information on the new automated ball valve solution and an opportunity to look at specifications and capabilities of the VZBE ball valves, DFPD quarter turn actuators, VSNC pilot valves, SRBC sensor boxes, and CMSX digital positioners, visit www.festo.com/us and call 800-993-3786. Also visit Festo Process Automation webpages to learn more about the company’s global capabilities. About Festo Call Festo at 800-993-3786 and visit www.festo.us. |
Parker Air Saver Unit Promises Plant Productivity Gains Parker Hannifin Corporation (NYSE: PH), the global leader in motion and control technologies, today announced that its new Air Saver Unit (ASU) pneumatic valve is growing in popularity on the factory floor because, when compared to uncontrolled blow-off in blowing applications, it provides higher productivity. In North America, this productivity benefit is now recognized as more important than the energy savings the valve was originally designed to provide.ASUs save energy by interrupting the flow of compressed air to blowing end uses at adjustable frequencies. Rather than a steady stream of air, an ASU delivers a series of impulses, which offers a significant mechanical advantage. Because the ASU has an opportunity to recover during the “off” period of each on/off cycle, the impulses are delivered with somewhat greater force than a steady stream of air provides. Parker originally developed ASUs for the automotive industry as a way to save energy when blowing dust and other contaminants off of car bodies prior to painting. The unforeseen advantage of the on/off technique was its improved effectiveness for this application and its impact on the customer’s productivity metrics.In addition to the automotive industry, ASUs can boost productivity in a wide range of other applications, including the removal of cuttings, shavings, etc. (i.e., swarf) produced by machining processes; PET bottle transfer and cleaning; parts feeding/handling; particulate separation, laser cutting; and electronic assembly systems.The Air Saver is available in port sizes ranging from M5 (5 CFM flow) to 1¼-inch (530 CFM flow). Other features include adjustable pulse frequency and duty cycles, a silicone-free grease version for paint shop applications, and an on time/off time adjustment needle. Contact Parker Hannifin for more information on this product and air saving application programs to help document energy savings using this product. www.parker.com |
Cleanroom Gripper for Small to Medium Part Handling The EGS from SCHUNK is perfect for the gripping of small to medium sized workpieces with flexible force and high speed in clean environments such as assembly, testing, laboratory and the pharmaceutical industry.It is digitally activated by binary signals for easy start up and rapid integration into existing facilities and is extremely fast to achieve the maximum number of cycles per minute. The EGS is very sturdy, making it almost wear-free while also supplying high gripping forces for every cycle.The EGS has autonomous gripping and swiveling, adjustable gripping force, and freely adjustable angle of rotation. It is energy efficient due to the use of an electric power train, and is very simple to use with no programming costs.www.us.schunk.com |
NEW PRODUCT: New Ion Air Jet is CE, UL and RoHS Certified EXAIR’s new Ion Air Jet removes static electricity, contaminants and dust from parts prior to shrink wrapping, packaging, printing, painting or finishing. This engineered product has undergone independent laboratory tests to certify it meets the rigorous safety, health and environmental standards of the USA, European Union and Canada that are required to attain the CE and UL marks. It is also RoHS compliant. New design features include a metal armored high voltage cable to protect against abrasion and cuts, a replaceable emitter point, integrated ground connection and electromagnetic shielding. The shockless Ion Air Jet is an effective spot cleaner, available with permanent mount or flexible hose with base for benchtop applications.The air saving Ion Air Jet uses a small amount of compressed air to entrain 80 percent of the total output airflow from the surrounding room air, minimizing compressed air use and maximizing ionized airflow. An electrically energized emitter at the discharge end fills the entire airstream with positive and negative ions capable of neutralizing high static charges in a fraction of a second. An optional regulator allows infinite adjustment of the air volume and velocity.For permanent mount applications, the compact Ion Air Jet is the best choice since it is lightweight and easy to install using the 1/8 NPT male inlet. For applications where frequent repositioning is required, the flexible Stay Set Ion Air Jet is ideal. The hose allows you to aim the ionized air at a localized area.The Ion Air Jet is quiet and lightweight. The 5 foot shielded power cable is flexible, designed for rugged use. A new selectable voltage power supply has been designed to operate the Ion Air Jet. Applications include cleaning molded parts, pre-paint dust removal, furniture finishing and package cleaning prior to labeling, printing, and assembly. Price is $334. For more information, contact EXAIR Corporation: |
NEW PRODUCT: No Drip Spray Nozzle Conserves Liquid, Fits in Tight Spaces EXAIR’s patented 1/4 NPT No Drip Internal Mix deflected flat fan atomizing spray nozzle atomizes fluid and sprays at a right angle to the nozzle orientation. This allows spray to be placed precisely where it is needed when the mounting and work areas are limited. This new nozzle works in the same way our standard atomizing nozzles do, but has the added benefit of positively stopping liquid flow when compressed air is shut off.When spraying any type of liquid, post-spray liquid flow can cause big problems. Unwanted drips can ruin product function on sealing or mating surfaces. Drips can also ruin the appearance of painted or coated finishes. In addition, excess liquid flow wastes precious resources such as expensive coatings, chemicals or water. EXAIR’s No Drip Atomizing Nozzles are ideal where no post-spray drip is permissible. When the compressed air supply is shut off, the No Drip nozzles positively seal off the flow of liquid eliminating the possibility of drips.EXAIR’s No Drip Internal Mix Atomizing Nozzles are available in five patterns: narrow angle round pattern, wide angle round pattern, flat fan pattern, deflected flat fan pattern and 360° hollow circular pattern. They are for pressure fed applications that don’t require independent air and liquid control. Internal Mix, External Mix, No Drip External Mix, Siphon Fed and No Drip Siphon Fed are also available in 1/4 NPT or 1/2 NPT.Applications include painting, coating, rinsing, cooling, quenching, wetting (moistening), and humidification and dust control. The compact Atomizing Nozzles are fully adjustable to minimize air and liquid consumption and have interchangeable liquid and air caps. All No Drip liquid nozzles are CE compliant and conflict mineral free. Prices start at $348. For more information contact: |
Clippard DR-2 Precision Diaphragm Regulators Cincinnati, Ohio–When Clippard invented miniature regulators in 1962, the MAR Series became very popular as a simple, robust, and cost-effective regulator in a small package with exceptionally long life. As regulator applications continue to increase, Clippard is meeting the demand with the newest addition to the reputable regulator line. The new DR-2 Series provides greater accuracy and repeatability (±0.15 psi) while maintaining the same flow and performance characteristics as the MAR regulators in a small, sleek package.Regulators are offered in either relieving or non-relieving versions. The relieving design maintains a constant pressure output even when downstream conditions change, while non-relieving regulators do not automatically compensate for changes in downstream flow or pressure. There is no vent to atmosphere, as in a relieving type regulator, and the output pressure can increase due to a downstream event. -Design for applications where zero air consumption is required (non-bleed) -Special diaphragm seal provides excellent accuracy and repeatability -Excellent corrosion resistance -Relieving and non-relieving designs -Manifold mount option -Features non-rising internal adjustment -ISO 9001:2008For more information about these regulators or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261 or visit www.clippard.com. Clippard Instrument Laboratory, Inc. |
Fabco-Air, Inc. Releases New 3-Way, Lock-Out/Tag-Out Valve Line Gainesville, Florida – Fabco-Air, Inc. is pleased to announce the launch of the new RLT Series Lock-Out/Tag-Out Valve product line.The 3-Way, Rotary Turn, Lock-Out/Tag-Out Valve Product line is a modular addition to the Fabco-Air FRL components. The connection can be made with NPT port or manifold interface items.These valves are available in the following 3 different inlet port sizes:• ¼” • ⅜” • ½” These manually operated valves are used to prevent undesired operation. While in the exhaust position, the valve can be locked to prevent an unintentional system start-up. Furthermore, this prohibits the unexpected cycling of equipment due to any stored energy in the airline. For more information about this product line or any of Fabco-Air’s products, call (352) 373-3578 or visit www.fabco-air.com. Fabco-Air, Inc. |
NEW PRODUCT: Stainless Steel Threaded Line Vac Turns Pipe Into a Conveyor EXAIR’s new 303 stainless steel 3/8 NPT and 1/2 NPT Threaded Line Vac™ Air Operated Conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. Their small size makes them perfect for fitting in the cramped spaces and tight confines of many production lines. The Threaded Line Vac is designed to attach to plumbing pipe couplers, sanitary flanges and other pipe fittings, making it easy to build a complete system using ordinary pipe and fittings. These new sizes of stainless steel Threaded Line Vac air operated conveyors make it easy to sample gas streams, sample grains or other ingredients, move small parts, or transport scrap or product out of small spaces.Threaded Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end with high output flows on the other. Response is instantaneous. Regulating the compressed air pressure provides infinite control of the conveying rate. Applications include scrap trim removal, material conveying, part transfer, fiber tensioning, filling operations and sampling.303 Stainless Steel Threaded Line Vacs are CE compliant and are suited to a wide variety of conveying applications. Larger threaded sizes in up to 3 NPT and smooth end models for hose up to 5″ are also available in aluminum, 303SS and 316SS. Prices start at $290.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/sssmtlv.htm |
Festo Introduces Low Cost EtherNet/IP Connectivity to Its Most Economical Valve Terminals The new Festo CTEU-EP universal EtherNet/IP interface module improves the quality, performance, and diagnostics of OEM pneumatic systems at a fraction of the cost of previous generation solutions – configure up to 96 valves on multiple valve terminals with a single EtherNet/IP node. The CTEU-EP is a Rockwell Encompass referenced productHAUPPAUGE, NY – The new CTEU-EP universal interface module from Festo makes EtherNet/IP connectivity low cost and plug and play for an extensive range of economical Festo valve terminals. The CTEU-EP is ODVA conformant and a Rockwell Encompass referenced product. For maximum flexibility, OEMs can configure up to 96 valves on multiple valve terminals with a single EtherNet/IP node. Basic diagnostics reduce downtime through faster identification of such fault conditions as under voltage and short circuit. The CTEU-EP offers plug and play connectivity and automatic identification of the valve terminal type and configuration. These attributes simplify and speed up installation. CTEU-EP lowers inventory requirements – a single part number covers multiple configurations – and, with an adapter, a single CTEU-EP can interface two valve terminals for even more efficiency and savings.The CTEU-EP connects to all Festo I-Port enabled valve terminals, including VTUG, VTUB, MPA-L, VTOC, and CPV. In harsh environment applications, CTEU-EP can interface EtherNet/IP to the MPA-C IP69K rated valve terminal. CTEU-EP is also compatible with other Festo I-Port enabled products such as the CTSL input module, SDAT cylinder position transmitter, OVEM vacuum generator, VPPM pressure regulator, CMMO-LK stepper motor controller, and to a number of pressure sensors. I-Port relies on standard single pin M12 male and female connectors, which eliminate the installation complexity and cost associated with multipin connectors.The CTEU family of universal interface modules is compatible with other leading Fieldbuses, including DeviceNet, Modbus TCP, EtherCAT, ProfibusDP, Profinet, CANopen, and CC-Link. In addition, CTEU modules can be connected via CANopen to Festo CPX-CEC front end control. For more information on the new Rockwell Encompass referenced CTEU-EP universal EtherNet/IP connector module and other models in the CTEU family, call Festo at 800-993-3786 and visit www.festo.us. |
NEW CATALOG: EXAIR’s New Catalog 30 Features new Cabinet Coolers, Conveyors, HEPA Vacs and Air Jets EXAIR’s new Catalog 30 is our best catalog yet; a full color technical guide offering solutions to common industrial conveying, cooling, cleaning, blowoff, drying, coating and static electricity problems. Catalog 30 introduces new Cabinet Coolers, Line Vac Air Operated Conveyors, Heavy Duty HEPA Vacs and Stainless Steel Air Jets. 316SS Cabinet Cooler systems in 275 and 550 Btu/Hr solve overheating problems for small electrical panels in corrosive and harsh environments. EXAIR has expanded our already large selection of Line Vacs – an excellent way to convey parts, material and waste. Brand new Stainless Steel models in 2-1/2″ (64mm) and 3″ (76mm) sizes provide even more options and are available in Type 303 and Type 316 Stainless Steel, as well as in Heavy Duty, Threaded and Heavy Duty Threaded styles. Stainless Steel plumbing kits for all Super Air Knives ease installation, eliminate pressure drops through poor fittings and prevent the hunt for hardware.EXAIR products help companies conserve compressed air, reduce dangerous noise levels and eliminate harmful dead end pressures. Detailed technical explanations, performance data, application photos and dimensional drawings are provided for each product. A price list is also included.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/cat30.htm |
Venturi Vacuum Pumps Need Only 45 psi Air Pressure A line of compact, multi-stage venturi vacuum pumps that need only 45 psi (3.1 bar) air pressure, but provide the same holding capacity as conventional pumps requiring 80 to 100 psi, is being introduced by ANVER Corp. of Hudson, MA.ANVER Air-Miser™ MSP-AM Series Multi-Stage Air-Driven Vacuum Pumps are now offered in five sizes from 0.06 to 0.64 SCFM @ 24”Hg and operate at 45 psi (3.1 bar) air pressure; about half that of conventional venturi-style pumps. Ideal for a variety of automation applications, these compact, lightweight pumps are made of anodized aluminum, have brass nozzles, and can be supplied with a wide range of options to meet specific application requirements.Safer and quieter than conventional venturi-style pumps, ANVER Air-Miser™ MSP-AM Series Multi-Stage Air-Driven Vacuum Pumps provide a reliable 100% duty cycle and equal the performance of much larger pumps. They measure 3.78”L x 1.26”W x 98”H (96mm x 32mm x 24.9mm), include a 2.76” tall x 2.76”W (70mm x 24mm) muffler and are offered with adapters for G to NPT attachment. |
ELP Electric Linear Module The SCHUNK ELP can be adjusted in two simple steps making it the most user friendly electric linear module on the market! The end positions can be mechanically adjusted with a screw and the speed of extension and retraction is adjusted using rotary switches on the side of the unit.Speed can be automatically adjusted, depending on extension weight and no shock absorber adjustment is necessary, because the drive automatically regulates the brake process. The ELP is practically wear-free with a long service life and low maintenance cycles. The control and power electronics are directly integrated into the module, and can be controlled by a fieldbus distributor or through digital signals. www.us.schunk.com |
NEW PRODUCT: Large External Mix Spray Nozzles Coat, Cool, Treat and Paint EXAIR’s new 1/2 NPT large external mix spray nozzles atomize fluids up to 303 gallons per hour. External mix nozzles are great where a high volume of liquid is needed. They can be used on liquids with a viscosity up to 800 cP. Large external mix nozzles are available in a narrow angle flat fan pattern. They combine liquid and compressed air to create a coating of liquid that can be easily adjusted to meet the needs of your application.With EXAIR’s 1/2 NPT large external mix atomizing nozzles, you can coat, cool, treat and paint a variety of products. Used with water, atomizing nozzles are an efficient way to evenly cool hot items in your automated process. Since they are external mix, airflow and liquid flow can be controlled independently which provides the most precise liquid flow.The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are available in 1/4 and 1/2 NPT. A variety of flow patterns and liquid rates are available to meet your needs. Internal mix and siphon fed atomizing nozzles are also available, as well as patented no-drip versions of all atomizing nozzles. All models are adjustable, CE compliant and come with our 5 year Built to Last Warranty. 1/2 NPT External Mix price is $642. Prices for all atomizing nozzles start at $186.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/lgextmix.htm |
Bimba | Acro Introduces Affordable Line of Pneumatic Pinch-Valves to Reduce Contamination Risk, Accelerate Change-out and Simplify Valve Replacement University Park, IL – Bimba, an industry-leading innovator of pneumatic, hydraulic and electric motion solutions, and Acro® Associates, Inc., a wholly-owned subsidiary of Bimba, today announced the release of the Model 600 series pneumatic pinch valves. These newly-designed units offer customers more choices, enhanced performance and greater affordability across a broad range of market segments and applications, especially those such as industrial, food and beverage, chemical, bioprocessing and medical where wash downs for sterility are essential.“Our customers have been looking for models that are drop-in ready for fluid, air, or gas systems that use flexible, disposable tubing,” says Peter Jensen, Product Marketing Manager for Bimba | Acro. “With the 600 series models, all of which employ pneumatic pinch valves, they will have complete assurance of media non-contamination, fast tubing change out, and easy valve replacement, all of which will maximize productivity.”Jensen says, “Pinch valves offer considerable advantages over wetted valve technologies they may have been using. For example, adhesive dispensing of viscous, sticky and corrosive material eats away at the internals of a wetted valve requiring frequent replacements. By substituting a pinch valve and disposable pieces of tubing, these concerns are eliminated, and at a greatly reduced cost.”The 600 series is comprised of three models (603, 604 and 606) that will support tubing outer diameters up to 0.375 inch, 60 psi media pressures and hardness ratings up to Shore 70 material. Units are panel-mount ready, with easy tube loading and change-out head-designed slot features. They will be available in single-acting, normally-open, closed, or double-acting formats. All units weigh less than a pound. For more information, please visit www.bimba.com/pinchvalve |
|
|
|
|
|
|
|
|
|
|
|
| New cartridge valve from Bürkert is ideal for custom manifold designs. .  The new cartridge valve (Type 6164) from Bürkert is a pneumatic pilot valve where the solenoid and precision moulded plastic valve body will slot directly into any custom manifold. Due to its outstanding reliability, above-average service life and efficient performance this valve provides the best opportunity yet for OEM process and machine designers to move away from external packaged pneumatic control valves. Due to the increasing importance of space considerations, weight and energy saving requirements, customised pneumatic control solutions are becoming more commonplace. The diminutive size of the new cartridge valves makes them ideal for use in multiples within compact manifold block solutions, where they can easily be positioned and integrated wherever it is most convenient.This saves costs on materials and reduces the overall weight and size of the system or device. In addition to the use as the “core” of future Bürkert valve islands, the valve is now being made available as a stand-alone component.Due to a wide range of conformance certifications, they can be used for general pneumatic piloting on machine, plus pharmaceutical production applications and for medical devices. Typically instances such as dental technology or in oxygen control units for mechanical ventilation for example.
|
 Fabco-Air, a leading manufacturer of fluid power products, has added another product line to the Fabco FastShipping Program.Fabco-Air is pleased to announce the addition of the “Original” Pancake® Air Cylinder product line to the Fabco Fast Shipping Program.The “Original” Pancake® Air Cylinder 2 Day Shipping Program includes:-8 Bore Sizes (1/2” – 4”) -Strokes from 1/16” to 4” -“T” Series – Thicker Piston Option that includes a rugged PTFE wear band. -4 Mount Styles -Both Single and Double Rod Configuration -Multitude of Useful Options -Male Rod Thread -Magnetic Piston -Bumpers -High Temperature Seals -Non-Rotating Piston Rod -Plus Much More! The Fabco Fast Shipping Program is comprehensive and very user-friendly! For more information about the Fabco Fast Cylinder Shipping Program, contact Fabco-Air, Inc. at (352) 373-3578, via e-mail at service@Fabco-Air.com or visit About Fabco-Air, Inc. The Original Pancake® air cylinder was designed in 1958, by Alfred W. Schmidt, the founder of Fabco-Air, Inc. Today, Fabco-Air is a leading manufacturer of fluid |
 NEW CATALOG: EXAIR’s New Catalog 29 Features new CE compliant and UL Recognized Static EliminatorsEXAIR’s new Catalog 29 is our best catalog yet; a full color technical guide offering solutions to common industrial cooling, drying, conveying, blowoff, cleaning, EXAIR products help companies conserve compressed air, reduce dangerous noise levels and eliminate harmful dead end pressures. Detailed technical EXAIR Corporation |
 Rapid Mechatronic Gripper for Small Part Handling-EGP 25 Speed VersionThe EGP from SCHUNK is the electric small part gripper with the most compact performance on the market. SCHUNK expanded the EGP series with a smaller size (25) which weighs 110g and has a stroke of 3 mm per finger. Furthermore, SCHUNK has developed an optional “speed” version of the EGP 25. By reducing the internal gear ratio, the speed version exchanges grip force for speed. This gives the EGP 25 speed version the ability to open or close in 0.03s. With a grip force of 13 N it is capable of handling parts up to 0.05 kg. For high speed pick & place applications where an electric gripper is preferred, the EGP 25 speed version is an excellent choice.Maintenance-free servomotors as well as a powerful junction roller guide guarantee a high level of efficiency, making it perfect for demanding pick & place applications. Users can transfer the sensor systems used in the SCHUNK MPG-plus to the SCHUNK EGP-Speed, and easily convert existing systems from pneumatic to electrical operation.The EGP 25 Speed takes screws on the side or at the base, which increases its flexibility within a system design. In order to increase the dynamics and the energy efficiency of higher-level systems, the gripper housing consists of special high-performance aluminum. In addition, the design eliminated excess material and the electronics are built in the interior to save space. It fulfills protection class IP30 and fits seamlessly in the program for modular high performance assembly from SCHUNK. About SCHUNK: |
 Pneumatics Online announces our new PneuCalc App for Android.Based on our Downloadable and Online calculators we have just finished our New Android App and are currently doing the final testing before publishing live. Once completed we will post our App to Google Play then the Apple App Store. We are currently looking for Beta testers, so if you are interested please email us at mail@pneumaticsonline.com to be added to the Beta testers list.
|
 Bimba Manufacturing Company, and itssubsidiary Mead Fluid Dynamics (MFD), today announced the addition of Digital Pressure Switches (DPS Series) to its line of high-value air preparation equipment. This compact and economical series displays system pressure on an integrated LCD and emits dual programmable output signals. Designed for use with MFD air preparation equipment, the digital pressure switches also transmit analog pressure data directly to the control system.“MFD digital pressure switches are elegantly-designed and reasonably-priced for delivering pneumatic system feedback to machine controllers. Like all MFD products, the DPS Series has been precision-manufactured and extensively-tested to meet the demands of basic and complex applications,” said Taylor Phillip, Application Engineer, Bimba/MFD. For more information: http://www.bimba.com/en/Products-and-Cad/Air-Preparation/Inch/Accessories/Global-Series/Digital-Pressure-Switch
|
| ROSS CONTROLS® opens in CANADA! ROSS Controls is pleased to announce the opening of ROSS Canada. Located in Barrie, Ontario; ROSS Canada will support the |
PMAT transforms your assembly tools Flexible vacuum tooling system excels in automotive body-in-white (BIW) assembly Hingham, MA – Piab’s Modular Automation Tooling, known in short as PMAT, is now available globally. The tooling system has been used mainly for years in North America by leading automotive manufacturers, where it has helped to quickly construct flexible and adjustable vacuum gripper/fixture tooling.“Experiences from the North American market show that PMAT is particularly advantageous when used for body-in-white (BIW) assembly, mostly in decentralized applications for greater up time, more reliability and ease in troubleshooting, but it can of course also be very useful when applied to general assembly stages,” says Josef Karbassi, Vice President of Piab’s Automation Division. Manufacturers can use PMAT to design robot end-effector tools, ergonomic tools or fixture tools for any type of automation equipment. PMAT offers both adjustability and rigidity, and will help producers to transform their assembly tools to meet their specific needs with minimal design time.The tooling system features connecting parts for welded frames or extruded profiles and swivel arm assemblies with single bolt adjustment for ease of set up with a choice of attachments. Some of these include ejectors based on Piab’s energy-efficient COAX® technology. The ejector units provide vacuum as well as a release function.For extra safety, the attachments may also be equipped with a Vacuum Check Valve in case there is an interruption of supply air and the energy saving unit Vacustat that saves up to 98% of air usage. The Vacuum Check Valve addresses both safety concerns and energy savings by securely holding parts in case of power loss or loss of compressed air. . Also available are suction cup attachments that make it easier to correctly position suction cups on objects, especially when these are of varying geometries, as in the case of automotive parts. The PMAT tooling system is made of high rated aircraft grade anodized aluminum and is machined, not cast, for a quality assembly and fit.. It is lightweight and easy to assemble on site without welding or use of special tools. A proven and reliable technology, PMAT is supported locally on a global basis. www.piab.com
|
| Fabco-Air, Inc. Custom Solutions Custom Pneumatic Slide  The Engineering and Technical Support Team(s) at Fabco-Air possess an unprecedented amount of Fluid Power problem solving experience. Here is just another example of how the team at Fabco-Air is able to offer a custom solution that fulfills the application requirement perfectly.This application required a pneumatic linear actuator to operate a sorting device on a conveyor system. The challenge was that the actuator had to maneuver a wide variety of part sizes.Here is a brief summary of the Fabco-Air solution. A GB Series (block style) pneumatic slide/thruster and a Global Series™ (metric compact) cylinder were combined together to make a 3-position, air-operated device. To expedite the changeover process and to accommodate thickness variations of parts on the conveyor, a Dial-A-Stroke® unit was also added. The Fabco-Air Dial-A-Stroke® enables quick and easy adjustability of the intermediate stroke position (up to 2″).As you can see, the team at Fabco-Air is more than capable of creating solutions for even the most demanding applications. Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
Read pressures wirelessly anytime/anywhere CINCINNATI, Ohio, – The new CirrusSense™ wireless router provides a gateway for remote pressure readings, diagnostics, and immediate email/text alarm alerts transmitted by CirrusSense™ pressure transducers. Introduced and demonstrated in booth 1682 at AHR 2016 by its maker, Transducers Direct, the new wireless router provides internet connectivity for Bluetooth-enabled CirrusSense pressure sensors attached to refrigerant, oil and water lines. Unique in the industry, the breakthrough technology provides worldwide remote access to pressure readings to ensure that monitored systems are fully functional and capable. U.S.-made CirrusSense technology is an industry first for improving business efficiency, service planning and eliminating unneeded service calls.The Bluetooth-capable CirrusSense™ sensor attaches to pressurized lines via a simple T fitting. It uses patent-pending circuitry to provide long battery life in permanent installations, with redundant sensing capability and self-monitoring of its own condition. Its free mobile app (“T-Direct TDWLB” for Apple or Android devices) lets the user name each sensor one time securely, set the scaling for the application, program setpoints/alarms for multiple sensors and monitor readings. The app also automatically calculates superheat and sub-cooling readouts.The CirrusSense sensor is available in two different compensated accuracies of 1 percent and 0.25 percent, with an external temperature sensing probe as an option for superheat measurement. The pressure of any fluid can be monitored from vacuum to 10,000 psi.”Service techs have told us this will save them and their customers time and money by preventing equipment damage, food spoilage, unneeded service calls, downtime and premature refills,” said Mark McDaniel, Sales Director of Transducers Direct. “Technicians can read refrigerant pressures remotely, without manifold gauges or refrigerant blowback. Facility managers, restaurant owners and service techs can receive text and email messages the instant an alarm level is reached to help avoid compressor damage and product loss. The sensors can be used as a diagnostic tool or in permanent installations. Homeowners can monitor their own A/C refrigerants, water or swimming pool lines, with instant notification of failures.” The US-made CirrusSense™ sensor is all digital, eliminating mechanical components, wear parts, analog circuitry and setpoint drift. Unique in design, it uses a one-piece, precision-machined stainless steel diaphragm and header. This provides ten times the life of a conventional diaphragm and eliminates all springs, pushrods, micro switches and O-rings. All wetted parts are stainless steel. The CirrusSense™ sensor’s proprietary design includes many industry firsts. It senses pressure by using a time-to-digital converter (TDC) to measure the duration of a capacitive discharge in picoseconds across the changing resistance in a Wheatstone bridge atop the diaphragm. Clever circuitry creates a redundant signal that ensures continuous machinery operation if one half should fail. The CirrusSense™ sensor is EMI/RFI protected and sealed to IP-65 rating. Standard overpressure rating is 2X, with 4X optional. Burst pressure is 5X or 20,000 psi, whichever is less. The sensor is available with a variety of industry standard pressure-port connections. Replacement battery packs are available from Transducers Direct. See the CirrusSense™ sensor demonstrated at Booth 1682, visit transducersdirect.com or call 513-583-9491. |
NEW PRODUCT: Spray Nozzle Coats, Cools, Treats and Paints in Tight Spaces EXAIR’s 1/4 NPT internal mix deflected flat fan atomizing spray nozzle atomizes fluid and sprays at a right angle to the nozzle orientation. This allows spray to be placed precisely where it is needed when the mounting and work areas are limited. These nozzles are ideal for coating the inside of enclosures and ductwork. They combine liquid and compressed air inside of the air cap to produce the finest mist of atomized liquid that can be easily adjusted to meet the needs of your application. These spray nozzles provide liquid flows from 1.8 to 6.9 gallons per hour.With EXAIR’s atomizing nozzles, you can coat, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 300 centipoise. They are commonly used with water, light oils, rust inhibitors, chemicals, paints and dyes.The stainless steel construction of these atomizing nozzles adds to their durability and corrosion resistance. EXAIR atomizing nozzles are available with 1/4 NPT and 1/2 NPT connections and in a variety of sizes and shapes to meet your needs. All models are adjustable, come with our 5 year Built to Last Warranty and are CE compliant. Internal mix deflected flat fan spray nozzles start at $187.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/smad.htm |
ROSS CONTROLS Announces BG Certification for CrossMirror® Series CM Valves (TROY, MI) – ROSS announces their CrossMirror® Series CM Size 0 valves are now BG Certified per the DIN ES ISO 138491 PL e standard. These valves are intended to be used to return a cylinder towards a safe position when de-energized or when a fault occurs. Applications could include pneumatic cylinder presses, welding equipment, and pneumatic doors to name a few. The third party assessment and certification was performed by DGUV Test who is regarded as one of the approved bodies for Machinery and Safety Components according to EC-Machinery Directive 2006/42/EC and German Product Safety Act. The ROSS Category 4 Safe Cylinder Return CrossMirror® Series CM Valve enables rapid exhaust of downstream air when de-energized to reverse a cylinder’s motion and return it to a safe position. This 5/2 valve is ideal for addressing a single hazard and has latch out capabilities that inhibit operation until the valve is reset should a fault occur. CrossMirror® Series CM Valves can be installed individually or multiple units can be connected together with manifold bases. The CrossMirror® Series CM Valve is the latest addition to the ROSS’ Safe Cylinder Return Valve family that covers a wide range of sizes that are available with either solenoid or air piloted options.ROSS CONTROLS Customer Service 800-438-7677 (in the U.S.) or 706-356-3708 (outside the U.S.) E-mail: custsvc@rosscontrols.com Internet: www.rosscontrols.com |
Festo Develops a Smart Service Unit that Lowers Compressed Air Energy Cost and Contributes to Improved Machine Operation The intelligent energy efficiency module MSE6-E2M from Festo automatically monitors and optimizes compressed air use by a machine and also alerts plant personnel to system leaks.HAUPPAUGE, NY, — Festo introduced today a first-of-its-kind intelligent service unit that automatically puts compressed air on standby when a machine stands idle, thus reducing energy consumption. These units also alert plant personnel to wasted energy when air leaks from a machine’s pneumatic system. The new Festo MSE6-E2M, or E2M for short, can pay for itself in less than a year. Automatically go into standby mode to save energy.Based on user defined parameters, the E2M module detects when a machine is idle and automatically shuts off compressed air thereby saving energy. When the unit receives a startup signal from an operator, the E2M resupplies compressed air. In the case of a particularly complex production process, automatic standby detection can be deactivated in favor of manual operation.The E2M features a solenoid valve integrated with a pressure and a flow sensor in one compact package. A Profibus node provides communication between the E2M and a PLC. Festo plans to introduce Ethernet/IP and PROFINET communication options in 2016. The E2M flows up to 5,000 liters of compressed air per minute, programs easily, and offers fast connection to Festo MS series air preparation units. Automatic leakage detection A wealth of data |
New 1 NPT Swivel Fitting Makes Precision Blow Off Easy from EXAIR EXAIR’s new Model 9204 1 NPT Swivel Fitting makes it easy to precisely adjust the position of our award-winning air nozzles. With this 303 Stainless Steel swivel, EXAIR’s powerful, efficient and quiet Super Air Nozzles can be pointed exactly where you need work to be done. A 50 degree total angle of adjustment provides the movement necessary for your nozzles to be in the best position for maximum effectiveness. The 1 MNPT x 1 FNPT swivel will work with any 1 NPT nozzle or fitting regardless if they have a male or female thread.EXAIR’s swivel fitting with Super Air Nozzle delivers a precision, highly focused and forceful blowoff for applications in tight spaces or requiring precision positioning for achieving desired results. The new 1 NPT swivels can be used with 316SS and zinc/aluminum alloy Super Air Nozzles. EXAIR nozzles from the smallest M4 x 0.5 to the 1 NPT have been engineered to maximize entrainment of room air while minimizing compressed air consumption and all have EXAIR swivels available. Safe operation is assured by meeting OSHA’s standard 1910.242(b) for pressure and OSHA’s noise exposure standard 29CFR – 1910.95(a). EXAIR’s nozzles are also CE compliant.Swivels can help make your nozzles more effective when replacing existing wasteful nozzles or open tubes and are ideal for blowoff, cooling and drying applications. Price is $225.00.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/1inswivel.htm |
Bimba | MFD Adds Coalescing Filters to its Line of High-Value Air Preparation Products University Park, IL – MFD Pneumatics, a wholly owned subsidiary of Bimba, today announced the addition of coalescing filters to its line of high-value air preparation equipment. Coalescing filters protect sensitive pneumatic equipment from the harmful effects of air line contamination. MFD’s coalescing filters remove fine oil mist and contamination down to 0.01μ. Fine borosilicate microfibers in the filter media collect microscopic particles while the outer filter drainage layer allows coalesced liquid to fall into the filter bowl.Available in a variety of sizes, MFD coalescing filters can be mounted individually or connected to other MFD Filter-Regulator- Lubricator (FRL) components via modular connector kits. Multiple drain styles (including manual, automatic, and semi-automatic) are also available.“The introduction of coalescing filters backed by Bimba’s quality and service is the latest development in our effort to add MFD products and accessories to our line of high-value air preparation products, valves, and actuators,” says Tom Kane, General Manager, MFD.For more information: http://www.bimba.com/Products-and-Cad/Air-Preparation/Inch/Filters/Global-Series/Coalescing-Filter/ |
|
| SCHUNK EGL: Intelligent Gripping Module
Since the finger position, closing speed, and gripping force are freely programmable within a maximum stroke of 48 mm per finger, diverse components with a weight of up to 3 kg can be Standard Profibus DP and CAN-Bus interfaces allow fast and easy integration in higher level system controllers. The gripper also features a USB-port as a service interface. A brushless servo motor ensures continuous and reliable operation with no maintenance required. To maintain the position in the event of a power outage, the gripper features an electrically operated brake. Since the EGL fulfills industrial standards and the basic version is connected only by means of industrial connectors, installation time is greatly reduced. The powerful mechatronic gripper is compatible with the world’s most extensive standardized line of modules for gripper systems from SCHUNK. In combination with quick-change systems and other robot accessories, it can significantly increase the flexibility and efficiency of handling processes. It is ideal for diverse applications in the field of industrial assembly technology, mechanical engineering, and lab automation. About SCHUNK: |
| FORT WAYNE, Indiana – PHD, Inc., a leading manufacturer of industrial automation solutions, is pleased to release the Series BCSU Universal Stretching Cylinder for the plastic bottle blowing industry. The new Series BCSU Cylinder expands our proven series of Sidel® solutions.  Series BCSU Universal Stretching Cylinders are direct replacements for Sidel® Universal Machines. These cylinders mount into the same space and bolt patterns, provide significantly longerservice life, and reduce maintenance and downtime in stretch blow molding applications. Units are field repairable and feature alloy steel piston rods and urethane piston and rod seals for maximum life and durability.Series BCSU Benefits: -Mounts into same space and bolt patterns -Provides significantly longer life and reduces maintenance -Internal shock pads are standard -Cushion controls are standard for retract end of stroke deceleration -Field repairable -X27 PHD inline check option provides long life check seal and is designed to prevent the stretch rod from dropping during maintenancePHD’s dedicated division, the Plastic Packaging Components (PPC) Group, focuses on blow molding of bottles and other plastic containers. These products are drop-in replacement solutions for Sidel® and Krones® and other brand machines. Other specialized solutions include blow molding nozzle actuators, needle cylinders, eject slides, transfer arms, and more. |
| ROSS CONTROLS® Announces Expanded DM Valve Series
ROSS CONTROLS Customer Service |
| Miniature M3 DRY BREAK QUICK DISCONNECTS
The Dry Break Quick Disconnect not only reduces assembly time but also prevents fluid from leaking out of the connector and damaging expensive electrical/mechanical systems. The disconnection is made by pulling a knurled sleeve back which is not only easy to use but also takes less than a second saving costly downtime. Designed with excellent sealing capabilities due to the minimized dead volume, the space between the internal and external ends when connected, leaks are non-existent when the two halves are disconnected. This is especially important when the fluid is a liquid or flammable gas. Both sides of the quick disconnect, internal and external, are fully shut-off prior to disconnection. Fast paced product development cycles are a reality with this design as assembly is quick and fluid leaks are eliminated. Manufactured in corrosion resistant 303 stainless steel and manufactured with a M3 thread. Using Beswick Engineering Dry Break quick disconnect will greatly improve both the design engineer and the customers’ experience. For more information, please contact: Mary-Jo Keenan |
 Clippard Stainless Steel Push-Quick FittingsCincinnati, Ohio — Constructed of high grade 316 stainless steel, these durable fittings provide a simple push-pull method of connecting pneumatic components to each other and system piping. Push-Quick fittings allow full flow through the hose/tubing I.D. with no smaller orifice required as in barb fittings. They are designed for use with both flexible hose and stiff tubing made of nylon, polyurethane, polyethylene or polypropylene. Many styles and sizes are available. -Offers high corrosion and chemical resistance with approval for use in packaging and For more information about these fittings or any of Clippard’s 5,000 other pneumatic |
Fabco-Air, Inc. Adds Air Preparation Products to Shipping Program The FA-Series (Air Preparation) 2 Day Shipping Program includes:-4 Sizes (28 to 350 SCFM) -1/8″ to 1″ NPT Ports -Filtration Rating Options: 5µ, 25µ, and 40µ -Lock-out/Tag-out 3-Way Valves -3-Way Slide Valves -Pressure Gauges -Mounting Brackets and AccessoriesThe Fabco Fast Shipping Program is both comprehensive and easy!For more information about the Fabco Fast Cylinder Shipping Program, contact Fabco-Air, Inc. at (352) 373-3578, via e-mail at service@Fabco-Air.com or visit http://www.fabco-air.com/news.html About Fabco-Air, Inc. The Original Pancake® air cylinder was designed in 1958, by Alfred W. Schmidt, the founder of Fabco-Air, Inc. Today, Fabco-Air is a leading manufacturer of fluid power products that offers a complete line of pneumatic products, i.e., air preparation (filters- |
NEW PRODUCT: New No Drip External Mix Atomizing Nozzles Positively Stop Liquid Flow -External Mix Atomizing Spray Nozzles mix liquid and air outside the nozzle and allow the air and liquid flows to be adjusted independently. The new, patent pending, No Drip External Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.-When spraying any type of liquid, post-spray liquid flow can cause big problems. Unwanted drips can ruin product function on sealing or mating surfaces. Drips can also ruin the appearance of painted or coated finishes. In addition, excess liquid flow wastes precious resources such as expensive coatings, chemicals or water. EXAIR’s No Drip Atomizing Nozzles are ideal where no post-spray drip is permissible. When the compressed air supply is shut off, the no drip nozzle positively seals off the flow of liquid eliminating the possibility of drips.-EXAIR’s No Drip External Mix Atomizing Nozzles are available in three different liquid patterns: round, narrow angle flat fan and wide angle flat fan patterns. They are for pressure fed applications where precise liquid flow is needed. External nozzles can be used on liquids up to 800 centipoise.Applications include painting, coating, rinsing, cooling, quenching, wetting (moistening), dust control and humidification. The compact Atomizing Nozzles are fully adjustable to minimize air and liquid consumption and have interchangeable liquid and air caps. They are CE compliant and conflict mineral free. Prices start at $346. For more information contact: |
SCHUNK Pick & Place Unit PPU-E 15 The PPU-E 15 is a high speed, linear motor driven pick and place unit that is custom-tailored for electronic and small part assembly applications. With a width of just 60 mm, and media supply via the back panel, it allows several units to be closely mounted side by side. If rotary indexing tables are used, more units can be arranged in a circle, or a smaller table diameter can be used.The PPU-E 15 requires just 0.6s to complete a cycle with a horizontal stroke of 145 mm, and a vertical stroke of 45 mm. That includes a payload of 1 kg, and 2 x 50 ms gripping time. At its peak, the PPU-E 15 achieves 100 picks per minute. As with all the linear motor driven pick & place units from SCHUNK, the PPU-E 15 is not susceptible to wear from a mechanical drive mechanism, like a belt or a screw. The wear free drive minimizes maintenance, increases continuous repeat accuracy, and simplifies programming. |
PHD recently released another new design of our OEM drop-in linear slide Built on the foundation of long-life products for industrial automation, PHD Optimax® actuators are designed to meet machine builders’ performance requirements at a competitive price. These economical, efficient, and reliable actuators provide an alternative choice to PHD’s standard “built-to-order” product line, delivering even more cost-effective solutions to meet industrial application needs.In a continuing effort to expand the Optimax product line, PHD is pleased to release a new drop-in replacement linear slide designed for the OEM market. This actuator is versatile and economical for use in the machine builders’ market.Optimax Series OSH Compact Pneumatic Slide Tables are designed for light duty applications in tight spaces.Benefits include: -Drop-in metric mounting matches global standard -Rail bearing technology provides excellent load carrying ability -4 bore sizes available in incremental travel lengths -Multiple port locations for flexibility in applications -Magnets standard for switch sensing capability -Standard shock pads reduce end of travel impact For more information and to download/order catalogs, visit www.phdinc.com/osh. For assistance, call (800) 624-8511. |
ROSS CONTROLS® Announces New and Improved Pneumatic Counterbalance ROSS Controls, Troy MI, introduces a new and improved 1-1/4” pneumatic automatic counterbalance for large mechanical stamping presses. This new ROSS automatic counterbalance system can be integrated with your existing press controls to set and maintain the correct pressure for each die set, improving parts quality and extending the life of the press. This latest solution for the Metalforming Press Industry meets all ANSI B11.1 requirements and is available in a variety of port threads, voltages and electrical connections. Properly set counterbalance pressures on each production run will eliminate gear and bearing clearances to reduce force loading, wear and motor loads. Two selectable modes of operation, manual or automatic using 2-way poppet internals, will provide positive shifting even in the most demanding low flow applications. All solenoids and main valve internals are interchangeable and can be serviced from the top for ease of maintenance and maximum flexibility.ROSS CONTROLS Customer Service 800-438-7677 (in the U.S.) or 706-356-3708 (outside the U.S.) E-mail: custsvc@rosscontrols.com Internet: www.rosscontrols.com |
Bimba Introduces Economical Compact Pneumatic Cylinders Bimba Manufacturing Company, an industry-leading provider of pneumatic, hydraulic, and electric solutions, and its subsidiary Mead Fluid Dynamics (MFD), an innovative manufacturer of pneumatic components, today announced the addition of compact pneumatic cylinders to its full line of MFD products. The new cylinders (MACQ series) are constructed with a robust, extruded aluminum body. Double-acting, available in ten different bore sizes and a wide range of standard stroke lengths, the new cylinders can also be obtained with a magnetic piston to enhance position sensing.The new compact line is suited for a broad range of general automation processes, providing flexibility in space-sensitive machine design applications. The low-cost line is also globally interchangeable with industry alternatives, allowing for quick drop-in replacement parts.“The MACQ compact cylinders are a logical extension of the full line of rotary actuators, air preparation equipment, solenoid valves and extruded thrusters that comprise our MFD product series. The new compact cylinder series maintains the high quality standard for which MFD Pneumatics is known and that our customers have come to expect,” said Tom Kane, General Manager for Mead Fluid Dynamics. For more information including product catalog, CAD files, visit http://www.bimba.com/Products-and-Cad/Actuators/Metric/Compact/Square-Extruded-Body/MACQ-Series/ |
| New! 3-Way DV Series High Flow Electronic Valves
Clippard DV Series High Flow Electronic Valves Features: For more information about these control valves or any of Clippard’s 5,000 other |
| Festo functional/modular systems improve the marketability and flexibility of OEM and integrator process skids.
“The new Festo initiative not only helps OEMs and integrators deliver a superior solution quickly and at a saving, it also provides the end user with a system that supplies continuous diagnostic data,” said Craig Correia, Head of Process Automation at Festo. “This data helps to ensure high uptime, improve validation/commissioning efficiency, and process quality. “The biggest opportunity to reduce manufacturing costs for the OEM happens in the design phase, where component selection is made and vendor partnerships are created. We strive to deliver solutions during design that make an impact. We’ve found that with early involvement we can help reduce skid fabrication assembly costs by almost 20 percent.” The traditional design for a water filtration plant includes valves, pumps, tanks, filter modules, sensors, and pipes. The required components for actuating the field devices are installed in a control cabinet, and a valve terminal such as a remote I/O system with integrated pneumatic section is connected to a central controller with visualization (management system) via a fieldbus. Plants of this type can be easily modularized by breaking down the process into sub processes and defining a module for each sub-process with all the mechanical and automation components required for standalone operation. Key modules systems in a water/waste water plant include pump, filtration, and clean in place. At the heart of any Festo modular system is the CPX modular controller with the MPA valve terminal. This in-the-cabinet controller, with an IP67 rating, provides serial linkage and consistent communication down to the valve level for comprehensive diagnostics. The compact MPA terminal has up to 64 valve positions/128 solenoid coils. This design saves considerable space in the control cabinet, helping to reduce cabinet size, and provides reliable feedback-free switching of pilot valves/process actuators. The Festo MPA valve terminal in this application features multipole mounting plates that decrease assembly time because there is no need to produce short runs of pneumatic cable within the cabinet or to make multiple bulkhead connections. Multipole plate gaskets have NEMA and IP ratings so the integrity of the enclosure is maintained against moisture, dust, and gases. By removing all the short pneumatic hoses inside the cabinet, the time to verify connections during the factory acceptance test or when performing field service is greatly reduced. Having all of the pneumatic connections on the outside of the cabinet wall improves the aesthetics and standards compliance for the cabinet. For applications requiring proportional pressure control, Festo enables embedded I/P directly on the same terminal as the pneumatic valves. This reduces I/O count and supply lines. It simplifies installation and lowers the number of components mounted on the skid. Festo also features valve terminals with integrated flow controls to control process actuation speed. This eliminates installation time at the actuator, ensures longer process valve life, reduces chance of water hammer, and shortens the bill of materials. The MPA-C clean design valve terminal is installed outside of the control cabinet closer to the point of process actuation. Positioning the MPA-C close to the actuation mounting helps speed up installation and reduces energy consumption. This valve terminal is easy to clean, highly corrosion resistant, sturdy, and extremely functional. This unit offers a modular single sub-base that houses a maximum of 32 valves or solenoid coils. The MPA-C is rated IP69K for maximum protection against water and is constructed of FDA certified materials. The unit is Fieldbus/Ethernet ready via the Festo CTEU module. Festo is also showing the versatile VZXF angle seat valve for skid applications. The VZXF controls gaseous or liquid media in open and closed circuits. The angle valve is suitable for contaminated or gaseous media to a viscosity of 600mm2/s. It features a stainless steel design with high thermal resistance and N/C functionality, which creates reliable closing on pressure drops. Hundreds of other products applicable to process control and a selection of active demonstrations are featured at the Festo booth. Festo applications professionals can answer visitors’ questions about the new Festo modular initiative for automating processing plants and how this approach utilizes performance data for preventative diagnostics, including: |
| NEW PRODUCT: New Large Internal Mix Spray Nozzles Coat, Cool, Treat and Paint
With EXAIR’s atomizing nozzles, you can coat, cool, treat and paint a variety of The stainless steel construction of these atomizing nozzles adds to their durability For more information contact: |
| SCHUNK FEATURED IN ROBOT REVOLUTION EXHIBIT AT MUSEUM OF SCIENCE AND INDUSTRY, CHICAGO Exhibit supported by Google.org features SCHUNK and begins national tour in Chicago  CHICAGO 6-12-2015—They’re here … to help and improve our lives. On May 21, 2015, the Museum of Science and Industry, Chicago (MSI) premiered a new national touring exhibit, Robot Revolution, supported by Google.org, which includes SCHUNK.Robot Revolution explores how robots, created by human ingenuity, will ultimately beour companions and colleagues, changing how we play, live and work together. The exhibit allows guests to step into a visionary world where robots are not just a curiosity, but a vital asset.The exhibit comes to life with a collection of cutting-edge robots that have been secured from some of the most innovative global robotics companies and universities. Within the Skills area of the exhibit, the SCHUNK LWA Powerball arm with the attached SCHUNK 3-finger hand allows guests to watch advanced gripping systems with seven degrees of freedom in action how they can grip various objects. Additionally, guests can see the SCHUNK 5-finger hand mimicking a human hand with nine motors, twenty joints, and elastic fingertips. SCHUNK Grippers also grasp object of all different shapes and sizes in the exhibit. “We are extremely excited to support MSI with its important mission to show the world MSI’s Robot Revolution exhibit development team worked with a renowned group of Throughout Robot Revolution, hands-on elements, intriguing video and thought-provoking “We believe it is vital to inspire the next generation of engineers and tech The Museum of Science and Industry, Chicago (MSI), one of the largest science museums in the world, offers world-class and uniquely interactive experiences that inspire inventive genius and foster curiosity. From groundbreaking and award-winning exhibits that can’t be found anywhere else, to hands-on opportunities that make you the SCHUNK, the worldwide competence leader for clamping technology and gripping systems, is a family owned operation and a global player in one. Totaling more than 60 years of experience, SCHUNK offers worldwide leading technology in gripping systems and clamping technology. With more than 2,300 employees located in more than 50 countries in a network of directly owned subsidiaries, SCHUNK offers global customer service and technical support. SCHUNK designs and manufactures an unmatched selection of gripping systems including grippers, rotary modules, linear modules, robotic components, sensors and accessories. SCHUNK lives its mission that “with a pioneering spirit and perfection, we are setting worldwide standards”. As a brand ambassador of the SCHUNK team, the No. 1 goalkeeper communicates our global competence leadership for clamping technology and gripping systems. The top performance of SCHUNK and Jens Lehmann are characterized by dynamics, precision, and reliability. |
| ROSS CONTROLS Announces SIL Certification for 21 & 27 Series Valves
The third party assessment and certification by TÜV Rheinland® Industrie Service GmbH The ROSS 27 Series in-line valves have a robust poppet design for near zero leakage & The ROSS 21 Series valves are configured like the 27 Series for use in applications ROSS CONTROLS Customer Service |
| Bimba | MFD Adds Coalescing Filters to its Line of High-Value Air Preparation Products University Park, IL – MFD Pneumatics, a wholly owned subsidiary of
Available in a variety of sizes, MFD coalescing filters can be mounted individually or connected to other MFD Filter-Regulator- Lubricator (FRL) components via modular “The introduction of coalescing filters backed by Bimba’s quality and service is the For more information:
|
| Atlas Copco Launches Next Generation of ‘Plug-and-Play’ On-Site Nitrogen Generators that Reduce Energy Consumption by 50 Percent
“When combined with Atlas Copco’s innovative and energy efficient compressors, on-site nitrogen generation can offer significant benefits compared to bulk nitrogen delivery,” Available in flows from 200 scfh to 21,860 scfh, Atlas Copco’s NGP+ PSA on-site The new NGP+ complements Atlas Copco’s full range of on-site gas solutions which
|
 Clippard MAR-1 Series Miniature Pressure RegulatorsCincinnati, Ohio — When Clippard introduced a miniature regulator in 1962, the MAR-1 became very popular as a simple, robust, and cost-effective regulator in a small package with exceptionally long life. As regulator applications continue to increase, Clippard ismeeting the demand with a variety of new models, options and improvements. Regulators are offered in either relieving or non-relieving versions. The relieving design maintains a constant pressure output even when downstream conditions change, while non-relieving • #10-32, M5, 1/8” NPT, R1/8, G1/8 & Cartridge Mounting Configurations For more information about these control valves or any of Clippard’s 5,000 other |
 Vacuum Lifter Handles Sphere- and Dome-Shaped LoadsANVER Corporation is pleased to introduce a compact, ergonomic vacuum generator with a vacuum pad attachment that mirrors the contour of dome-shaped, round loads with smooth or semi-textured surfaces. The VPF Series Vacuum Generator is a below-the-hook system designed for a single operator to safely handle spherical and shallow conical loads. These vacuum generators are offered in electric and For use with the VPF Series Vacuum Generator, the vacuum pad attachment features a soft replaceable foam seal that grips smooth and semi-textured surfaces without marring. This sturdy pad attachment is suitable for domes or tank heads made from metal, composites, and glass. The pad attachment requires a minimum The pad attachment is suitable for loads up to 500 lbs. (227 kg), while the standard VPF Series Vacuum Generator is available for loads up to 2,000 lbs. (907 kg) capacity. The ANVER VPF Series Vacuum Generator is priced from $2,495.00 depending upon the vacuum pad construction. Price quotations are available upon request. |
 Protect Electronics From Heat With Digital ControlEXAIR’s digital ETC (Electronic Temperature Control) is now available for Dual Cabinet Cooler® Systems The ETC accurately maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics. It permits just enough cooling for the electronics without going so cold as to waste compressed air. A digital LED readout displays the temperature of the electrical enclosure (°F or °C), then displays the user temperature setting when pressing the “push to set” button. When that setting is exceeded, the Cabinet Cooler System is activated. The ETC is suitable for NEMA 4, 4X and 12 environments and works with our UL listed Dual Cabinet Coolers systems which are available with cooling capacities of 4,000, 4,800 and 5,600 Btu/Hr. All systems include an automatic drain filter separator to keep moisture in the compressed air out of the enclosure. Models are available for 120 VAC or 240 VAC and lower cooling capacities are available. All products are CE EXAIR Corporation |
 Energy efficiency module MSE6-E2MThis world first enables you to save compressed air and energy in your system The energy efficiency module is a completely new, intelligent combination of service units, sensors and fieldbus technology. It fully automatically monitors and regulates the compressed air supply. 3 core functions: -Automatic shut-off of the compressed air in stand-by mode For more information on the DDLI pneumatic servo controlled actuator, call Festo at 800-993-3786 and visit http://www.festo.us.
|
 SCHUNK SRU-mini-Speed Rotary UnitThe SCHUNK SRU-mini-Speed rotary unit sets a benchmark in high-performance assembly in terms of cycle The SRU-mini-Speed is based on the features of the compact and light SCHUNK SRU-miniflat rotary unit, which has been proven for many years in assembly and packaging applications. Since the dimensions and connections of the hard or softly damped SRU-mini unit are consistent, already existing modules can be exchanged 1:1 which provides the highest flexibility for system integrators. Three damping versions are available; the hard damped SCHUNK SRU-mini-H for minimum interfering contours in case of About SCHUNK: SCHUNK is the worldwide competence leader for clamping technology and gripping systems. Totaling more than 60 years of experience, SCHUNK is a family owned operation and a global player in one. For more information, visit www.schunk.com |
 Clippard Announces “Wrapped & Ready” Stainless Steel Cylinder InitiativeContinuous Flow Manufacturing (CFM) Process Expanded. Huge Inventory Available. Cincinnati, Ohio — With increased market demand for stainless steel cylinders, For more information about these cylinders or any of Clippard’s 5,000 other standard |
 Festo Introduces the VSNC Series – The Company’s Next Generation NAMUR ValvesTurn a seal at the NAMUR interface and the VSNC 3/2-way valve becomes a 5/2-way valve for greater flexibility and fewer inventory requirements.HAUPPAUGE, NY — Festo introduces the VSNC series which replaces two existing products for NAMUR valve applications. With multiple coil options, including Class I Division 1(FM) or intrinsic safety, the VSNC is an excellent fit for ordinary environments and hazardous locations alike.NAMUR valves attach to the side of a single or double acting actuator in a process application and by applying a voltage to the solenoid coil, compressed air either opens or closes the valve connected to the actuator. By implementing a NAMUR valve, the effort and exposure of additional tubing is eliminated as the valve is mounted directly to the actuator. The VSNC is a strong competitor in price, durability, and environmental tolerance. Available as one unit for 3/2 and 5/2 functionality, the switchable seal doesn’t require the storage of additional parts to convert the configuration from one operation to the other. Available in 5/3 options, the VSNC can be used for positioning applications and can be ordered with the mid position as closed, pressurized, or exhausted.Offering two body types, the VSNC is available with either a brass or stainless steel tube. The higher end model features an aluminum body and a protected exhaust. Festo also offers the coil and the valve as one piece and all models are available with either ¼” G or NPT threads. Another feature of the VSNC is the rebreather function that routes treated air from port 3 to the spring chamber. This function enhances the life of the actuator by using clean air instead of air from the environment, which often contains dust and contaminants. In contrast to factory automation, process automation involves continuous processes. Most of these involve mixing or fermenting liquids, bulk materials, gases, and more. Valves control the flow of these materials. The valves consist of the following components: Festo can provide a complete one-stop-shop for valve control that networks with PLCs and distributed control systems (DCSs). For more information on the new, competitively priced, versatile VSNC series of NAMUR valves, call Festo at 800-993-3786 and visit www.festo.com/us. |
 EXAIR PRODUCT UPDATE: Heavy Duty Dry Vacs Are Now CE CompliantIndependent laboratory tests now certify that EXAIR’s Heavy Duty Dry Vac™ meets the rigorous safety, health and environmental standards of the European Union that are required to attain the CE mark. The Heavy Duty Dry Vac is a rugged, industrial duty vacuum cleaner that has been engineered to vacuum high volumes of dry materials in less time than ordinary vacs. The wear resistant design is suitable for the clean-up of abrasive materials like steel shot, garnet, metal chips and sand, yet can also be used for general purpose applications. The Heavy Duty Dry Vac is compressed air powered and attaches to a 30, 55 or 110 gallon open-top drum. It is extremely quiet at 82 dBA (half the noise of electric vacs), making it suitable for a wide variety of applications. Surrounding air is kept clean by the filter bag that traps particles when vacuuming dusty materials. There are no motors and impellers to clog or wear out. It is covered by a five year warranty. The Heavy Duty Dry Vac System comes complete with a lever lock drum lid, shutoff valve, reusable filter bag, 10′ (3m) polyethylene static resistant hose (1-1/2″/38mm I.D.), hose hanger, 20′ (6m) compressed air hose with swivel fittings, pressure gauge and heavy duty aluminum chip wand. Deluxe Systems add a drum dolly, heavy duty aluminum tools and tool holder. Premium Systems add a 30, 55 or 110 gallon drum. Prices start at $1142. |
 Rapid Mechatronic Gripper for Small Part HandlingThe EGP from SCHUNK has the most compact performance of any electric small part gripper on the market. SCHUNK has expanded the EGP series with the addition of the smaller size 25. The small, speedy gripper weighs 110 g and has a stroke of 3 mm per finger. The gripping force can be adjusted on 2 stages and its maximum gripping force is 40 N. The gripper can handle workpieces up to 200 g, making it as efficient as its pneumatic counterpart. Its closing time amounts to 0.09 s and it is the smallest representative of electric small part grippers with integrated electronics of its kind. The maintenance-free servo motors are brushless and equipped with efficient cross roller guidance.The mechatronic gripper is based on the platform of the proven pneumatic MPG-plus small part gripper, offering many advantages. In most cases, the users can transfer the sensor system of the MPG-plus onto the EGP and existing systems can be quickly changed from pneumatic to electronic. Actuation is done analogous to the MPG-plus digitally or by a sensor distributor. The MPG-plus and the EGP can be mounted from the side or the bottom, which increases the flexibility of the design. In order to increase dynamics and energy efficiency, the gripper housing is made of special high-performance aluminum. The EGP fits seamlessly into the SCHUNK program for modular high-performance assembly. It complies with protection class IP30 and is suitable for various applications in the field of small part handling and assembly. |
 FORT WAYNE, Indiana – PHD, Inc., a leading manufacturer of industrial automation solutions, is pleased to release a new metric design of its Optimax Series OCG Round Body Pneumatic Cylinder.Built on the foundation of long-life products for industrial automation, PHD Optimax actuators are designed to meet machine builders’ performance requirements at a competitive price. These economical, efficient, and reliable actuators provide an alternative choice to PHD’s standard “built-to-order” product line, delivering even more cost-effective solutions to meet industrial application needs. Optimax Series OCG Round Body Pneumatic Cylinders are designed to be extremely versatile and economical for use in the machine builders’ market. Benefits include: To learn more and download or order a catalog, visit www.phdinc.com/ocg. For immediate assistance, call (800) 624-8511 |
 Clippard All Stainless Steel Pneumatic CylindersDesigned for use in a broad range of applications including those in washdown and caustic environments, these quality cylinders are constructed of durable303 and 304 stainless steel. They include a Nitrile rod wiper to keep potential contaminants from penetrating inside the cylinder, and are available with bore sizes from 3/4″ to2″. Standard stroke lengths are from 1″ up to 32″ on some models. -Precision rolled construction for a solid, leakproof cylinder For more information about these new cylinders or any of Clippard’s other quality pneumatic products, call 513-521-4261 or visit www.clippard.com. Clippard Instrument Laboratory, Inc.7390 Colerain Avenue | Cincinnati, OH 45239877-245-6247 | 513-521-4261www.clippard.com |
 Extremely Compact and Powerful Servo GripperThe EGL from SCHUNK is an extremely compact and powerful servo gripper. It has flexible control of gripping force, speed, and position, which makes it well suited for pharmaceutical, testing, laboratory, and assembly applications. The EGL has on-board power and control electronics so there are no other external devices needed to operate the gripper. It is powered by 24 VDC and can communicate by Profibus-DP or CAN-bus. There is an electric brake which allows for position maintenance and a pseudo absolute encoder function. The EGL weighs just 1.8 kg, but it can generate up to 600 N of grip force which allows it to easily grip work pieces weighing 3 kg. This power to weight ratio combined with a stroke of 49 mm per jaw, makes the EGL one of the most powerful and flexible servo grippers on the market. |
 New ECO22 Valve Series from Pneumax Competitively priced, good performance and versatility combined with a compact design are the main characteristics of this new series of valves. The aluminium valve body and spool/seal arrangement optimize both the flow rate and the valve switching time. This new series of valves are available with G1/8” and G1/4” ports in 3/2, 5/2 and 5/3 versions. Monostable or bistable versions are available and include an integrated technopolymer solenoid operator with 9mm stem and built in manual override. These valves have an average life of 15 million cycles depending on the application and air quality, filtered and lubricated air using specified lubricants will dramatically reduce the wear of the seals and ensures long and trouble free operation. Please ensure that the valve is being used according with the manufacturers specification, such as air pressure and temperature and that exhaust ports 3 & 5 are protected against the possible ingress of dirt or debris. Repair kits including the spool complete with seals are available for overhauling the valves; however, although this is a simple operation it should be carried out by a competent person.
|
 Longer Static Eliminator Neutralizes And Cleans Wide SurfacesEXAIR has expanded Long Super Ion Air Knives to a range from 60 inches (1524mm) through a maximum length of 108 inches (2743mm). All knives 60 inches (1524mm) and longer are now made in a one piece construction. New one piece construction ensures seamless airflow and eliminates coupling multiple short length air knives together. One piece construction decreases overall height by 1/2 inch making it better for tight spaces. EXAIR offers an unmatched selection of materials and sizes within our Super Air Knife product line. From 3 inches to 108 inches in Aluminum, 303 and 316 stainless steel. Longer Super Ion Air Knives neutralize static electricity while blowing away dust and particulates from wide webs and printed surfaces, paper, plastics, wood, acrylic and three dimensional shapes. The wide laminar airstream full of static eliminating ions is effective at high speeds and provides superior cleaning up to 20 feet away. Poor print quality, dust attraction, tearing, jamming, and related equipment downtime can be eliminated from processes such as laminating, printing, routing and thermoforming. The Long Super Ion Air Knife is highly efficient and adjustable. It will operate effectively down to 5 PSIG and use a minimal amount of compressed air to entrain high volumes of surrounding room air. The shockless design is UL Component Recognized to US and Canadian safety standards. There are no moving parts to wear out. A factory installed plumbing kit is also available that makes it easy to connect Long Super Ion Air Knives to any plant’s compressed air system and obtain the best performance. Prices start at $1,994. EXAIR Corporation |
 High-efficiency Hydra-D air dryersHeatless twin towers with unique adsorption desiccant Removing moisture and particles from compressed air is critical for manufacturing pharmaceuticals, food products, paints and other processes requiring clean, dry air. A new range of desiccant dryers, Hydra-D from Norgren, outperforms traditional dryers by using pressure swing adsorption to increase dryer efficiency and simplify operation. Hydra-D removes particles down to one micron and water vapor down to -40 degrees pressure dew point, meeting ISO-8573-1:2010 Class 2 particle and water removal specifications. Wet air from a pneumatic supply line enters the dryer and bulk liquids and particles are removed by the filtration/separation stage. Air passes through the desiccant bed where any remaining moisture is adsorbed. Dry air is filtered again before exiting the dryer. The PLC-controlled unit is compact and simple to install on floor or wall. The modular cartridge design makes Hydra-D easy to maintain since it requires no external filters, silencers, or handling of loose desiccant. Exhaust air channeling reduces noise levels significantly. Dew point monitoring and low air consumption save energy. To put the Hydra-D air dryer to work protecting your equipment and processes, contact Norgren at www.norgren.com/global/dryers or call 800-710-7823. |
 EXAIR PRODUCT UPDATE: Reversible Drum Vacs Are Now CE CompliantEXAIR’s Reversible Drum Vac and High Lift Reversible Drum Vac are ideal for the recovery of fluids like: coolant, hydraulic oils, sludge and chips, waste water, and liquid The standard Reversible Drum Vac’s high powered vacuum produces 96 inch H2O of vacuum and can fill a 55 gallon drum in just 90 seconds, with the turn of a knob, Both Reversible Drum Vacs attach quickly to any closed head 30, 55 or 110 gallon drum. For small jobs, a 5 gallon Mini Reversible Drum Vac System is also available EXAIR Corporation |
 Festo Introduces the DDLI Pneumatic Actuator for Servo Positioning and Force ControlThe new DDLI servo-pneumatic actuator from Festo delivers precise dynamic movement of large loadsup to 180kg horizontally and 60 kg vertically – and cycle times up to 30 percent faster than comparable standard pneumatic actuators.The new DDLI servo-pneumatic actuator with integrated position feedback offers OEMs fast, controlled positioning and the capability to regulate feed forces on the fly. The DDLI is ideal for positioning a diverter on a conveyor, opening and closing large machine doors, clamping, and more. When used with the Festo CPX-CMAX servo-pneumatic controller, the DDLI can be operated like an electric servo drive to perform position and force tasks. Use the integrated record set table to predefine position and force tasks in the CMAX controller. Or send position and force directly from the PLC to the CMAX controller and modify movements on the fly. This actuator is well-suited for precise dynamic movement of large loads. When used with the Festo CPX-CMPX soft stop module, DDLI eliminates impacts at the end position and achieves cycle times up to 30 percent faster than comparable standard pneumatic actuators.The Festo DARD coupling reduces play between the actuator and load making for stable position/force control and measurements. Ball joints in the coupling compensate for misalignments in position and orientation of the load. With a protection rating of IP67, the actuator is suitable for wet and dirty environments. A wide variety of fieldbus options provides the connectivity needed to deliver a variety of advantages, including remote maintenance, remote diagnostics, web server Key specifications include: For more information on the DDLI pneumatic servo controlled actuator, call Festo at 800-993-3786 and visit http://www.festo.us.
|
 Festo Introduces a Low-Cost, Versatile Programmable Position Transmitter for Linear Actuators
The new SDAT-MHS T-slot programmable position transmitter from Festo provides the same functionality as position transducers and mechanical potentiometers at a The five sizes of the Festo SDAT-MHS correspond to the most commonly used strokes of Festo pneumatic cylinders. The SDAT-MHS detects complete strokes without Analog current output, digital switching output, and IO-Link are combined within this sensor. Using traditional analog and digital inputs, For more information on the low-price-point, versatile SDAT-MHS T-slot programmable position transmitter, call Festo at 800-993-3786 and visit http://www.festo.us.
|
 Introducing the NEW Humphrey PC10 High Flow Series ValveHumphrey Products is proud to introduce the next offering in the series – the PC10. The PC10 is the High Flow version of our previously released PC3 Miniature Proportional Valve from the series. The PC10 is a 10-32 threaded, 2-port proportional valve capable of 0-65 LPM flow at 5.2 watt maximum power consumption. It is available as inline or manifold mount, with control voltage options of 0-10V or 0-20V, and has option picks for maximum pressure ratings up to 100 PSIG and orifice sizes to 0.090″ to best suit your application and flow requirements. Additionally, the PC10 has the same mounting footprint as the PC3. The PC10 High Flow Mini Proportional Valve, like any from the series is ideal for many types of compressible media including vacuum. With its selectable or dynamic control of media flow, it can be applied to a multitude of market segments such as medical and analytical, testing and instrumentation, as well as factory and process automation. All of the products in the series are RoHS and REACH compliant. The series when complete will include three proportional valves and two electronic proportional relgulators. This series from Humphrey Products can precisely control output flow by varying the internal orifice with the amount of input current applied to the solenoid. They are designed for fast response, quiet operation, low hysteresis, and consistent flow (also referred to as “gain”) throughout the operating range. For more information on the PC10 and the series go to www.humphrey-products.com and click the “New Product” menu button. You can also use the Online Product Configurator to find product options, list prices, and to download a PDF brochure or CAD model. |
 Festo Introduces a New Series of Compact, Powerful Pneumatic Twin-Piston Semi-Rotary Drives – the DRRDThe DRRD series is ideal for precise and economical handling and assembly applications Festo introduced today the DRRD, a new series of pneumatic twin-piston semi-rotary drives for handling and assembly operations. This new pneumatic rotary drive is precise, economical, and powerful. The DRRD received the international Red Dot Design Award for product design. -A fully sealed variant for wet or dusty environments The semi-rotary drive DRRD operates on a rack and pinion principle with high accuracy in the end positions. It has high bearing load capacity. The splash proof design meets IP65 and EN 60529 standards. There is a choice of mounting options. |
 NEW PRODUCT: New High Power Stainless Steel Flat Super Air Nozzle™ Saves Space and Money, Resists Corrosion and High Temperatures
For more information contact: EXAIR Corporation |
 Standardized Long-Stroke Gripper with CFC HousingThe standardized CGH light-weight gripper is the result of modern simulation methods, intensive test series, and economic manufacturing processes. The long-stroke gripper benefits from the specific material characteristics of CFC: Its E-value is four times higher, and its tensile force is twice as high as aluminum. The gripper weight has been reduced by 40%. In order to take complete advantage of the composite fiber technology, and to ensure stability of the gripper, the gripper housing has been manufactured according to specific stress requirements, using the RTM process. The result is a light, yet sturdy gripper, which has a correspondingly torsional stiffness. At a weight of 11.7 kg, the CGH has a gripping force of 2.500 N, and a variable stroke per gripper finger of up to 160 mm. The gripper can handle workpieces up to 12.8 kg. The decoupled re-circulating ball carriages ensure that the acting moments will be evenly distributed so that about 90% of the used energy is on the finger of the gripper. By varying the quantity and distance of the guide carriages, the module can be adjusted to the individual load. For high gripping forces, or very long fingers, the distance between the carriages can be increased. This makes it possible to use fingers with a length of more than 1.000 mm, and approximately the same clamping forces will act along the whole finger length. To increase the gripper’s efficiency, the stroke can be scaled by adjusting the damped end positions. The positions “open” and “closed” are adjusted according to the requirements, and the complete cylinder does not have to be aerated and de-aerated at every cycle. This minimizes cycle times, and also reduces compressed air consumption. The toothed belt-drive synchronizes the fingers and ensures that the gripper works precisely in case of varying strokes, where small and big components can be alternately handled. Various robots can be directly adapted using an ISO flange. About SCHUNK: |
 Bimba Unveils “Smart” Technology Platform that Provides Predictive Intelligencefor Pneumatics
Ultimately, this machine-to-machine technology enables users from a wide range of industries tomove from emergency repair to proactive maintenance, thus optimizing production as a whole.IntelliSense® is compatible with Bimba cylinders in pneumatic systems but the company plans to extend its capabilities to other Bimba products in the future. Wood says, “The pneumatic industry has never seen an innovation like this. IntelliSense® is unique, not just in the way it works, but in how it will benefit industry from the c-suite to the factory floor. In short, IntelliSense® is more than just a technology platform. It is the solution to one of the most pressing concerns of manufacturers today, the need for maximum uptime.” Bimba Manufacturing Company |
 AVENTICS Announces 3 Days Shipping for Pneumatic and Hydraulic NFPA CylindersNFPA cylinders join AVENTICS Quick Ship focused delivery program • Pneumatic and hydraulic steel bodied NFPA cylinders. Lexington, Kentucky, August 27, 2014 – AVENTICS announces 3 Days Shipping for Pneumatic and Hydraulic NFPA Cylinders In recent months, AVENTICS Corporation relocated production of NFPA steel cylinders back to Lexington, Kentucky where the manufacturing of them dates back to 1964. With full production capability achieved, the NFPA cylinders are now joining the Quick Ship focused delivery program. The program provides shipping in three business days for the most common NFPA cylinder options with no increase in price. The NFPA cylinder Quick Ship program details are available online (www.aventics.com/us/QuickShipNFPA). AVENTICS NFPA cylinders include PowerMaster® pneumatic (pressure to 250 psi) and medium-pressure hydraulic cylinders (pressure to 1500 psi), plus PressureMaster® high-pressure hydraulic cylinders (up to 3000 psi, 5000 non-shock). Bore sizes are 1-1/2” to 14”, with some limitations on 14” PressureMaster. Over 20 NFPA standard precision machined mounting styles are available, with many options for piston rods, rod threads, ports, seals, stop tubes, limit switches, etc. AVENTICS NFPA cylinders can interchange with other manufacturers’ NFPA cylinders. An online configurator is available for configuring a customer cylinder and provides a part number and CAD files. The AVENTICS (formerly Rexroth Pneumatics) Quick Ship program is available for customers in the USA and Canada. In addition to off the shelf pneumatic components, it includes fast delivery of custom configured pneumatic directional control valve manifolds plus custom pneumatic and hydraulic cylinders. Quick Ship shipments are made by either the USA factory in Lexington or from distributor stock within the time frame stated. AVENTICS is a globally active manufacturer of pneumatic components and systems. The company is also a specialist supplier of drive and control solutions for the marine industry and commercial vehicles, as well as inverted tooth chains for production processes. The former subsidiary of Bosch Rexroth has been operating as a standalone company since the start of 2014.
|
 Humphrey Products announces the introduction of the 193 Balanced Solenoid Valve Series — the 19mm version of the 15mm 153 model, and our next addition to the balanced direct acting valve series.Larger but like the 153, the 193 was developed for maximum utility. Each 3-port solenoid valve meets a variety of functions with its multi-purpose classification. It boasts significantly more flow than the 153 (153: 0.25Cv; 193: 0.65Cv), while fitting into tight spaces with its 19mm size. The reasonable price point makes 193 a great value to OEMs and end users in a variety of market segments. The 193 is a balanced-poppet design, which means all internal forces generated by the pressurized media have been neutralized. Expect the valve to have a very stable performance regardless of media fluctuations, mild contamination, or porting choices. Plus, Humphrey’s stringent requirements for extremely low 4ccm leak rates apply. Special features of the 193 Balanced Solenoid Valve: For more information on the 193 Balance Solenoid Valve Series, visit http://www.humphrey-products.com |
 PEEK Pico Super Air Nozzle Assures Precise Non-Marring BlowoffEXAIR’s new PEEK Pico Super Air Nozzle™ has been engineered to produce the highest performance attainable from a tiny nozzle. It delivers one of the smallest, most precise blowoffs available with an efficient, high volume, high velocity airflow. The overall length of the air nozzle measures only 0.63 inches (16mm) with a diameter of only 0.20 inches (5mm), permitting installation in tight spaces. Its PEEK thermoplastic construction provides self-lubricating qualities with a low coefficient of friction to produce non-marring protection for sensitive materials. PEEK thermoplastic has excellent chemical resistance and can withstand many harsh environments found in chemical, plating, etching and metal cleaning processes and thrives in seawater environments. The PEEK Pico Super Air Nozzle is suitable for blowoff, cooling and drying applications located in general industrial or corrosive environments. For more information contact: EXAIR Corporation |
 Compact Short-Stroke Axis for Dynamic Assembly ApplicationsSCHUNK has combined a powerful linear motor drive with an ultra-smooth pre-loaded roller guide for its ELB linear axis and is designed for precise and dynamic strokes. The result is an extremely compact, rigid and dynamic module which is able to position high loads with excellent repeat accuracy of 0.01 mm. The maximum acceleration is 100 ms-2 and the maximum speed is 4 ms-1. Since the driving force (maximum: 150 N) is transmitted directly and without gears to the slide by the play-free junction roller guide, the operators benefit from the outstanding precision, extremely short cycle times as well as high productivity and process stability especially in the case of demanding joining and placement processes. The module comes in three stroke versions: 50 mm, 75 mm and 125 mm. As an option, it can be equipped with an incremental stroke measuring system (sine/cosine interface) or with an absolute displacement encoder (Hiperface or SSI interface). An absolute-value transducer eliminates the need for complex reference runs when starting up the plant and after emergency stops. In addition, the module doesn’t need end or reference sensors, reducing investment costs, programming work and the number of cables in the cable set. The unit is controlled either by the Bosch Rexroth IndraDrive controller or by the Siemens SINAMICS inverter. By using standard controller interfaces the module can be quickly and easily integrated into higher-level control systems. As an option, the short-stroke axis can be equipped with a pneumatic load-balancing system or with a holding brake for use as a Z axis. Due to a standardized mounting pattern, it can be combined directly with numerous SCHUNK modules. The pneumatic LM 100 linear module by SCHUNK can be replaced 1:1 by the SCHUNK linear motor axis ELB, increasing flexibility 211 Kitty Hawk Drive |
 Bimba Introduces Efficient, Versatile MHRQ Series of Rotary ActuatorsBimba Manufacturing Company, an industry- leading provider of pneumatic, hydraulic, and electric solutions, and its subsidiary Mead Fluid Dynamics (MFD), an innovative manufacturer of pneumatic components, today added extruded pneumatic rotary actuators to its full line of rotary actuators. |
 EnKon Improves Ergonomics with Scissor Lift and Rotate System for CartsWalled Lake, Michigan, August 25, 2014. EnKon Systems, Herkules Equipment Corporation’s brand name of lift systems, designed, engineered, and manufactured a pneumatic Scissor Lift and Rotate System to specifically fit a customer’s cart for improving ergonomics and productivity in their facility. With this new system, the customer is now able to raise a cart containing a pallet to the proper heights while placing products onto the pallet. The rotate system allows the cart to easily turn 360°, reducing the time and back strain to complete the task. Once the pallet is fully loaded, the customer can lower the lift and roll the cart full of products to the next step in the process. The system is built with the rotate bearing attached to a platform below the lift, with four mounting holes for securing the system to the floor. The high-grade rotate bearing is heavy-duty and can withstand load slamming from forklift trucks. Safety features include the optional bolt-on bellows skirt to protect from pinch points, a maintenance safety stop, and captured roller wheels to prevent the lift table from tipping. It is rated for a capacity of 2,000 lbs, and 12,000 duty cycles per year. For more product information, please contact EnKon Systems at 800-444-4351, or at info@enkon.pro or visit our website at www.enkon.pro. EnKon Systems is the brand name for Herkules Equipment Corporation’s electric, hydraulic and air powered scissor lift table systems. Herkules has been manufacturing lifting equipment close to 30 years, building a solid reputation specifically for designing & manufacturing air operated lift systems for a variety of applications. Standard and custom lift systems include; Electric Belt Drive Lifts, Electric Ball Screw Lifts, Air Lifts, Hydraulic Lifts, Lift Tables, Lift & Rotates, Lift & Tilts, Operator Lifts, Power Rotate Systems, Cart Positioners, Pallet Positioners, Post Lifts, and Lifts for Integration. |
 Clippard EGV Series Electronic High Flow Poppet ValvesClippard’s EGV Series valves are electronically piloted versions of the GV series valves, ideal for large flow, low leak applications. Available in 1/8″ NPT ported and manifold mount, they utilize Clippard 10 mm or 15 mm valves, and offer numerous voltage and connection options. These 2-way and 3-way valves provide 10 times more flow than Clippard’s MAV series and 2.5 times more flow than the MJV series! An externally piloted option is available for controlling lower pressures or other media. -Small, compact, lightweight with high flow Clippard Instrument Laboratory, Inc. |
 Festo Reimagines Actuator Control Valve Design and Saves Customers Money, Time, Energy, and Space
HAUPPAUGE, NY, Festo design engineers reimagined pneumatic actuator control valve design to create multi-functional units that are less expensive to purchase than comparable solutions, more than 50 percent smaller in terms of height, save energy, and are easier and faster to install, troubleshoot, and maintain. Festo now offers the new space saving VFOF, VBNF, and VBQF multi-functional pneumatic control valve series. If an OEM wanted additional control functionality for a pneumatic actuator, then traditionally multiple components would have been added. For example, the OEM would use a one-way flow control valve for speed control, an air-piloted check valve for stopping cylinder movement and maintaining position, and a manual override valve to release trapped air when servicing. This meant that three different components were VFOF features three functions in one unit The new Festo VFOF, model LE-BAH, adds control functionality without these problems by providing one-way speed control, manual override, and emergency stop functionality – holding a piston’s position even in the vertical position – in a single compact unit. The unit bolts directly to the actuator port and lies flat against the actuator for space savings in terms of height. The unit’s multiple ports are clearly labeled for fast, accurate The new VBNF control valve delivers emergency stop and manual override in one unit. The new VBQF offers two options – manual override with a silencer and manual override without a silencer. “This new series of control valves demonstrates the power of functional integration combined with a keen eye for industrial design,” said Frank Langro, Director Marketing and Product Management at Festo. “From space savings and acquisition cost to installation, operation, and maintenance, these units define a |
 SCHUNK SRU-mini-Speed Rotary UnitThe SCHUNK SRU-mini-Speed rotary unit sets a benchmark in high-performance assembly in terms of cycle time and frequency. With 2 model sizes, these speed models from SCHUNK pro-vide swivel times from 0.27s. If lightweight parts are handled with the unit, more than 4,000 cycles per hour can be achieved which is more than twice as many cycles as a conventional ver-sions. Model size 10 achieves swivel times of 0.27s and up to 3,600 cycles per hour are possible. As an alternative to higher speeds and number of cycles, higher load capacities can be im-plemented with an unchanged installation space. The secret is a patented damping design, where elastomer has been combined with an oil-damped shock absorber. This unique damping has already been successfully implemented in the larger rotary modules of the SRU-plus series. The SRU-mini-Speed is based on the features of the compact and light SCHUNK SRU-mini flat rotary unit, which has been proven for many years in assembly and packaging applications. Since the dimensions and connections of the hard or softly damped SRU-mini unit are con-sistent, already existing modules can be exchanged 1:1, which provides highest flexibility for system integrators. Altogether three damping versions are available: the hard damped SCHUNK SRU-mini-H for minimum interfering contours in 211 Kitty Hawk Drive |
 NEW PRODUCT: Expanded Sizes of Digital Flowmeter AvailableEXAIR’s Digital Flowmeters provide an excellent way to monitor compressed air consumption and waste. Now, with the addition of six new sizes, we make it easier than ever to measure consumption and identify trends at all of the critical areas or individual legs of a compressed air system. Measuring compressed air is the first step toward identifying high compressed air use areas, compressed air leaks and optimizing air use.
For more information contact: EXAIR Corporation |
 Bimba Introduces New Composite Push-to-Connect FittingsUniversity Park, IL, Bimba Manufacturing Company, an The broad new line, which combines plastic with existing metal barbed fittings, now includes specialty items such as union branches and tube-to-stem elbow reducers. These are available in sizes ranging from thread sizes #10-32 to 1/2 npt, and tubing diameters from 1/8 “to 1/2″. “Every cylinder, manifold, and valve sold by Bimba requires at least one fitting,” said Jerry Scherzinger, the company’s Product Marketing Manager. “Now, our customers who expect the quality for which Bimba is famous, can consolidate their purchases with one stop, buying one of our pneumatic solutions with the fitting most appropriate to its use.” The push-to-connect fittings broaden Bimba’s inventory of the most popular fitting styles, including elbows, tees, and straight connectors. To view the complete range of new composite push-to-connect fittings, visit www.bimba.com |
 Vacuum pump designed for small parts pick and placeHingham, MA — Piab, a leading supplier of industrial vacuum technology, offers its patented COAX® technology in a new small sized ejector called piPUMP™ MICRO. COAX® is the most energy efficient ejector technology based on a multi-stage concept for creating vacuum with compressed air. piPUMP™ MICRO is truly easy-to-buy and easy-to-mount and use. A handy configurator tool on Piab’s website, www.piab.com, allows the user to select the vacuum characteristics along with a few options for filtration and connections. The piPUMP™ can be used for small centralized systems but perhaps even more suitable for semi- decentralized systems, i.e., a few units creating vacuum supporting a few small cups each. Thanks to very low weight and small dimension it can also be used as a fully decentralized ejector on a Delta robot for example. The small footprint of the unit provides flexibility in mounting and use. Installation is a breeze with push-in connections and a common feed for compressed air, regardless of the number of units chosen. The central exhaust allows the exhaust to be drawn away in clean room environments. Because COAX® Cartridges are up to twice as fast as other cartridges and provide three times more flow than a conventional ejector with the same air consumption; the piPUMP™ MICRO is able to provide a high performance even at low or fluctuating feed pressures (14-87 psi). Additionally, piPUMP™ MICRO vacuum units begin producing vacuum immediately when the pressure valve is turned on, making maximum use of the
|
| AVENTICS Free Ceram™ Pneumatic Valve Trial Program
• Discover the Ceramic Advantage – provides a free valve for customers to try, with minimal qualifications required. Lexington, Kentucky, May 28, 2014 – AVENTICS announces the Discover the Ceramic Advantage free Ceram valve program. The Ceram ISO 5599-1 pneumatic directional control valve has been solving customer downtime problems since 1986. Now AVENTICS is announcing the Discover the Ceramic Advantage program to allow new customers in the USA and Canada to try a Ceram valve free of charge. The program requires minimal qualifications by the customer in order to receive a free valve. Unique, sliding ceramic plates (rather than standard rubber seals) form a near perfect seal, allowing the Ceram to be more tolerant of dirty air and harsh conditions than other directional control valves. The near diamond hard plates wipe themselves clean, shrugging off ingested dirt that destroys ordinary valves. The Ceram offers an extremely long life (expectancy of 150 million cycles) and won’t “stick” like many spool valves. The ceramic plates are warranted for the life of the valve. Using the Discover the Ceramic Advantage program, AVENTICS (formerly Rexroth Pneumatics) will allow you to interchange and upgrade the valve where you are having the most downtime/failures to the valve customers have named “the bullet-proof valve”. For program details and the form to request a free valve, go to: www.aventics.com/us/ceram AVENTICS is a globally active manufacturer of pneumatic components and systems. The company is also a specialist supplier of drive and control solutions for the marine industry and commercial vehicles, as well as inverted tooth chains for production processes. The former subsidiary of Bosch Rexroth has been operating as a standalone company since the start of 2014. |
| Fabco-Air, Inc. Releases New Vane Style Rotary Actuator Line
The ultra compact, Pancake® design is available in 4 different models (10, 15, 20, and 30 mm). Standard rotation angles are 90°, 180°, and 270°. Stainless steel shafting is a standard feature on the FRB Series. Unique sensor mounting design enables adjustment through the entire range of travel. A comprehensive offering of position sensing includes round profile sensors with surge suppression, polarity protection, and LED indication. Mounting is made easy with direct body mounting standard on all units as well as an optional flange mount. The 6-hole flange mounting pattern allows mounting to the unit at 60° internals. For more information about this product line or any of Fabco-Air’s products, call (352) 373-3578 or visit www.fabco-air.com. Fabco-Air, Inc. |
| Clippard High Flow 2-Way Bidirectional Electronic Valves The Next “Gen” Valve that is compact, quick and offers flows to 100 l/min!
|
| NEW PRODUCT: PEEK Super Air Nozzle Features Strong Non-Marring Blowoff
For more information contact: EXAIR Corporation |
| Versatile Ultrasonic Diagnostic Tool “Hears” Problems Before They Lead to Breakdowns
The Marksman II uses a two-tiered approach to ensure accurate diagnosis. The receiver converts inaudible ultrasonic sound into audible sound using heterodyne circuitry. Then, its unique Sound Signature Technology finetunes the audible sound into the natural sound emitted by the leak itself. A 5-LED signal intensity indicator and audible alarm pinpoint the exact source of the problem. An Internal Noise Control (INC) feature safeguards against ambient noise. The Marksman II comes complete with an ultrasonic receiver, full-sized, heavy duty, noise-canceling headphones, a hollow air probe, a solid contact probe and an ultrasonic emitter that helps locate faulty seals, gaskets and weatherstripping in doors, windows, ductwork and other non-pressurized enclosures. All components are packed in a sturdy carrying case. For more information about the Spectroline® MDE-2000NC Marksman™ II, call toll-free 1-800-274-8888. Outside the United States and Canada, call |
| ROSS CONTROLS® Releases New Size 0 CROSSMIRROR® 5/2 Double Valve
The valve has a self-contained monitoring system, requires no additional monitoring and is designed for CAT-4 Performance Level e applications (certification pending). Upon detecting a fault due to discordant spool valve action, the valve locks out and remains so until an overt reset signal (electrical solenoid or remote pneumatic) is applied. This prevents unintentional reset and further bolsters safety. The optional pressure switch provides valuable feedback to the operator regarding whether or not the valve is in “ready-to-run” condition. The CROSSMIRROR® size 0 valve is base-mounted and can be manifolded together with multiple valves should the application require it. This option saves time and money otherwise spent for additional piping labor and materials. Available in 1/4 and 3/8 port size, the valve can also be used as a 3/2 normally-closed or normally–open valve by plugging the unused outlet port. ROSS CONTROLS Customer Service |
| CINCINNATI, Ohio, June 2014 – The new TDEPS electronic pressure switch designed by Transducers Direct is the first in the industry with digital reliability, patented design and proprietary circuitry that creates redundant sensing capability.
Unique in design, the TDEPS uses a one-piece, precision-machined stainless steel diaphragm and header. It provides ten times the life of a conventional diaphragm and eliminates all springs, pushrods, micro switches and o-rings. All wetted parts are stainless steel. The TDEPS senses pressure by using a time-to-digital converter (TDC) to measure the duration of a capacitive discharge across the changing resistance in a Wheatstone bridge atop the diaphragm. Clever circuitry splits the signal from the bridge, creating a redundant signal that ensures continuous machinery operation if one half should fail. Circuit updates in the one millisecond range ensure smooth function. The TDEPS’s all-digital design eliminates amplifiers, filters, amplified noise and signal delays, producing a high-resolution signal without analog variability or noise in the circuit. Maximum electrical consumption is 9-28VDC at 35 mA. Fast factory programming of both set point and hysteresis allows next-day shipping. The TDEPS is EMI/RFI protected and sealed to IP-65 rating. Standard overpressure rating is 2X, with 4X optional. Burst pressure is 5X or 20,000 psi, whichever is less. It is available with a variety of industry standard pressure-port connections. For more information on the TDEPS, visit transducersdirect.com or call 513-583-9491. Transducers Direct |
 New Proportional Valve Series Offers Fast Responsiveness and Low HysteresisIntroducing the PC3 Proportional Valve and the kick-off of the Humphrey Proportional valves precisely control output flow by varying the internal The PC3 is a 10-32 threaded, 2-port proportional valve capable of 0-24 LPM For more information on the ProControl PC3 Proportional Valve, please visit |
 Sometimes knowing where to hunt for business can be challenging.Therefore, we thought it would be advantageous to share yet another “out of the box” Fabco-Air, Inc. success story. Fabco-Air products are frequently used in a multitude of real world applications. Mass motor transit vehicle builders often turn to Fabco-Air for their most challenging pneumatic applications. Subsequently, while riding on a city bus or being transported from your hotel/condo to an amusement park, there’s a great chance that you’re riding in a vehicle that incorporates Fabco-Air products. The Engineering and Technical Support Team(s) at Fabco-Air literally has multiple centuries of Fluid Power problem solving experience. Here is just one example of how the team at Fabco-Air is able to offer a custom solution to a challenge that others might find daunting. The challenge was to design a pneumatic device to secure wheelchairs on mass transit motor vehicles with precise control requirements. The Fabco-Air solution was a custom pneumatic rotary device. Here is a brief summary of the Fabco-Air solution. An air valve located in a control panel close to the driver sends air from the onboard compressor to force oil through fixed orifices in a double air-over-oil system. The oil drives a helical, piston-operated rotary device to raise and lower a padded restraining arm. The piston moves outward several inches to the left simultaneously rotating the shaft counterclockwise to raise the arm. Reversing the piston lowers the arm to secure the wheelchair. The entire package fits neatly on the back of a steel base attached to the floor. As you can see, the team at Fabco-Air is more than capable of creating solutions for even the greatest challenges. Please contact Fabco-Air, Inc. customer service with any questions. FABCO-AIR solves problems. Let us help! |
 NEW PRODUCT: Small NEMA 12 Cabinet Coolers Resist Heat And DirtEXAIR’s new small NEMA 12 Cabinet CoolerŽ Systems keep electrical enclosures cool with 20°F (-7°C) air while resisting heat and dirty environments that could adversely affect the internal components. This durable Cabinet Cooler system provides a low cost, easy to install, maintenance free solution for enclosures in hot, remote and/or dirty environments. The cooling capacity of up to 275 Btu/hr. is ideal for small electrical enclosures with problematic overheating. Models with higher cooling capacities are available. For more information contact: EXAIR Corporation |
 Sometimes, Getting the Boot Can be a Good ThingAs a measuring device, a pressure gauge is a relatively fragile component when installed among piping and machinery. An environment that doesn’t usually command a light touch can be punishing to a vulnerable instrument. The patented Ashcroft® PowerFlex™ gauge movement offers exceptional resistance to shock. To further shield the gauge in harsh conditions, a new rubber boot accessory is available to protect the exterior of the gauge and absorb shock to the movement when struck or dropped during portable use. The boot accessory is available for Ashcroft® lower-connect commercial gauge types 1000, 1005, 1005P, 1005S, 1005P-XUL and 1005M-XRG. To learn more about these and other Ashcroft instruments, please visit our website at www.ashcroft.com or call the Ashcroft ActionLine® at 800/328-8258. |
 Schunk Introduces New Improvements to Compact Ring Indexing Table
211 Kitty Hawk Drive Morrisville, NC 27560 |
 New Pilot Valve Series Offers Affordable Option for Pneumatic Interface ApplicationsHumphrey is pleased to introduce the A10 and A15 Series “Pilot” Valves ? Configured as compact 3-port sub-base mount, the A10 and A15 Pilot Valves The A15 Series is 15mm in width, produces 0.05 Cv flow, power consumption The A10 Series (at right) is similar but is only 10mm in width, producing For more information on the A10 or A15 Series Pilot Valve, visit |
| Fabco-Air, Inc. Releases New OEM NFPA Air Cylinder Line
The product line is loaded with standard features. In fact, the cylinders automatically come with magnetic pistons for position sensing. Adjustable cushions at both ends of the cylinders are included as a standard option as well. Stainless steel tie-rods are incorporated into the cylinder construction as well as anodized end caps. Each cylinder includes both bottom tapped and end-cap sleeve nut mounting configuration. NFPA mounting is made easy by simply adding one of the many detachable NFPA mounts that is offered by Fabco-Air to the standard cylinder. This air cylinder line offers elasticity to tight budgets without sacrificing quality. Additionally, with most components in stock, the new OEM NFPA is capable of meeting even the most demanding delivery requirements. For more information about this product line or any of Fabco-Air’s products, call (352) 373-3578 or visit www.fabco-air.com. Fabco-Air, Inc. |
| High Performance Air Springs for Suspensions in Heavy Duty Vehicles, Agriculture Applications, Cabins and Seating
Off-Highway vehicles are increasingly fitted with air springs, or air bags, to ease the ride comfort and to protect the vehicle body due to the nature of the off-road conditions. Rolling lobe piston-style air springs and convoluted air bellow actuators are used in axle suspensions on agriculture, construction and mining vehicles. Air springs can also be used in agriculture implements like boom sprayers, seeders and trailers to stabilize the boom, provide suspension or serve as a low cost actuator with high reliability. Sleeve type air springs used in cabin suspensions perform better than conventional steel-springs due to their low natural frequency, which greatly enhances a commercial vehicle’s riding comfort. Driver’s seats fitted with air spring systems give the operator’s workplace a more ergonomic and comfortable design, thereby reducing fatigue and work-related health risks. ContiTech North America Phone +1 248 393 5486 |
Clippard Releases New Manifold Mounted Multi Check Valves Cincinnati, Ohio — Clippard’s efficient R-614 Multi Check Valve integrates four check valves in one compact valve body. Take advantage of the many features of this versatile line including easy manifold mounted design, integrated circuitry, Octoport outlet design, maximized performance and more. Eight air passages extend longitudinally through the body surrounding the valve cavity integrated circuit.The R-337 is a 3-way, spring return, fully-ported, piloted valve with an independent check valve in the same body. It can be used Normally-Open, Normally-Closed, as a diverter or as a selector.The R-338 is a 2-position, 3-way, double-piloted, fully-ported valve also with an independent check valve. It can be used Normally-Open, Normally- Closed, as a 2-position diverter or as a 2-way selector.All are housed in a valve body designed to mount and link together with a simple piping system that eases assembly and plumbing, resulting in reduced labor costs, errors in installation, and the potential for plumbing leakage. For more information about these valves or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261 or visit www.clippard.com. Clippard Instrument Laboratory, Inc. |
NEW PRODUCT: Long Ionizing Bars Eliminate Static Cling EXAIR’s new Long Ionizing Bars are now available to eliminate static electricity on paper, film and plastics that are up to 96″ (2438mm) wide. Static electricity can attract dust and foreign materials, ruin product appearance, produce tearing or jamming and zap personnel. The profile of the electrically powered Ionizing Bar is compact, allowing it to fit in the confined spaces of machinery, where the static charge is generated. A high concentration of positive and negative ions produce fast static decay, neutralizing any surface within 2″ (51mm) of the bar. The long length of the Ionizing Bars allows them to be used across large production lines. The unique design of the shockless Ionizing Bar offers improved performance and reliability in industrial applications. Life expectancy has been extended by insertion molding the stainless steel ion emitters into a durable plastic. Prices for Long Ionizing Bars start at $793. The ability to eliminate static can be greatly improved when attaching a Super Air Knife to the Ionizing Bar. The Super Ion Air Knife delivers more ions and is effective from a greater distance which is ideal for high speed, high charge applications. Air delivery can also remove dust and clean the product surface. For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com www.exair.com/lib.htm |
Festo Introduces the DGC-K Rodless Pneumatic Drive for simple drive functions where installation space is limited.
Festo introduces the DGC-K, a compact rodless pneumatic drive ideal for simple drive functions Festo developed a unique sealing system which includes a polyurethane sealing band that snaps into the profile of the DGC-K for effective sealing, and |
New proportional Regulator from Pneumax Modern industrial applications require increasingly high performances from their pneumatic components. For example, the speed and thrust of a pneumatic cylinder, or the torque of a rotary actuator may need to be varied. These parameters often need to be modified dynamically while an operation is running. Traditional solutions based upon pneumatic valves supplied with different pressures often take up excessive amounts of space. An alternative solution is a regulator that can vary pressure over time. This type of regulator is known as an electronically controlled proportional regulator. Two sizes have been designed, with flow rates of 7, 1,100 and 4,000 Nl/min. |
| piFLOW® p vacuum conveyor line expands with bigger pumps
Piab, a leading supplier of industrial vacuum technology, expands the piPREMIUM vacuum pump line for its vacuum conveyor series- the piFLOW®p. With the addition of the new larger sizes, it would allow for greater speeds to handle difficult to move powders and granules over a greater distance. The piPREMIUM pump together with the piFLOW®p vacuum conveyor is ideal for meeting the high demand from the Food and Pharma industries. With Users benefit from the latest in vacuum technology from COAX®’s ejector efficient design that saves on compressed air energy costs. The working |
 Humphrey Products proudly announces the introduction of the L310 LatchingSolenoid Valve Series.Based upon the proven Humphrey technology of the balanced-poppet, direct-acting 310 solenoid valve design, the L310 Latching Valve has low power consumption and low heat generation offering potentially tremendous energy savings over traditional solenoid valves applications where power is limited or coil heating is unwanted.Standard single solenoid valves require electrical power while holding the valve in the energized position. The L310 Latching Valve needs a 50-millisecond pulse to shift from one position to another. Power is removed and the latching function holds the position, offering significant energy savings for applications when the valve remains open for long periods of time. Continuous power is not required to maintain the energized position, especially beneficial for battery-powered applications or when continuous power supply is limited.Since the L310 Latching Valve does not require electrical power to maintain the actuated position, the coil heat rise is temporary and minimized. This makes L310 an ideal choice for applications where the effect of the temperature is a concern. Developed for maximum utility, each 3-port solenoid valve meets a variety Other attractive features include: – 2- or 3-way For more information on the L310 Latching Solenoid Valve, visit |
To introduce the Optimax product line, PHD proudly presents the Optimax Series OSD Pneumatic Thruster Slide. PHD, Inc. revolutionized pneumatic actuators with the innovative Tom Thumb® Cylinder over 55 years ago. Today, PHD is setting the standard in industrial automation with a new product line that broadens its range of product offerings and provides customers Built on the foundation of long-life products for industrial automation, PHD Optimax™ products are actuators designed to meet machine builders’ To introduce the Optimax product line, PHD proudly presents the Optimax Series OSD Pneumatic Thruster Slide. The Series OSD is a robust linear The Series OSD features oversized guide shafts to provide maximum rigidity with minimum deflection. Urethane shock pads on extend and retract To learn more and download/order catalogs, visit www.phdinc.com/OSD. For immediate assistance, call (800) 624-8511. |
 Schmalz Composite Grippers SCGHandling of Composite Textiles Applications System design composite grippers SCG Design vacuum generation (2) Our Highlights… Your Benefits… |
 New Clippard In-Line Flow Control SeriesCincinnati, Ohio – Clippard’s new PQ-FV In-Line Flow Controls can be easily added to existing circuitry and are lightweight and compact in size. Since it is a tube-to-tube connection, in-line flow controls may be installed as a meter-in or meter-out device. The PQ-C Elbow Controls are ideal for low cost and lightweight applications when mounting directly to an NPT port on a cylinder or valve is required. In the meter-out versions, intake air flows freely through the flow control; exhaust air is metered out through an adjustment screw. With the meter-in series, air is metered in through an adjustment screw; exhaust air flows freely. Control is varied through a finely threaded adjustment screw. A locking nut is provided so it can be secured in its final setting. • Available in over 25 different models: #10-32, 1/8” NPT, 1/4” NPT, 3/8” NPT. For more information about these control valves or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261 or visit www.clippard.com. Clippard Instrument Laboratory, Inc. |
 Super Blast Safety Air Guns with Extensions Offer High Power for Hard to Reach BlowoffEXAIR $B!G (Bs Super Blast Safety Air Guns have always provided high quality performance for your blowoff, drying or cleaning needs. Now, they are available with 3 foot and 6 foot extension pipes. These CE compliant Super Blast Safety Air Guns with Extension Pipes provide strong blowing force to clean large areas quickly and the extensions allow you to reach areas not easily accessible. Extension Pipes give you a safer way to blow off those hard to reach areas, while allowing you to stay compliant with OSHA noise (29 CFR 1910.95(a)) and dead-end (29 CFR 1910.242(b)) regulations. Supplying compressed air closer to the affected area can decrease air consumption and increase results; adding an extension can reduce excessive bending and reaching. EXAIR $B!G (Bs Super Blast Safety Air Guns use engineered air nozzles for high performance – designed to maximize entrainment of room air while minimizing compressed air consumption. Super Blast Safety Air Guns range in force from 4.5 to 23 pounds. Combining that force with the added benefit of being able to reach tight machinery spaces makes the Super Blast Safety Air Gun a great tool for wide area blowoff, cooling and drying. Prices start at $262.For more information contact: EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621 Phone: (800) 903-9247 Fax: (513) 671-3363 E-mail: techelp@exair.com |
 Efficiency Booster for Small Part Handling from SCHUNKWith the micro valve MV 10, you can easily boost the productivity and energy efficiency of Pick & Place applications for small parts. This pneumatic valve is so small it can be integrated directly on grippers or other pneumatic actuators and can be plugged or screwed into the actuator ports. Traditional systems use valves located in a control cabinet some distance from the gripper and use tubing from the valve to the gripper. Compressed air must travel the entire distance from the valve to the gripper which takes time and requires additional air to fill the tubing. Once the gripping operation is finished, the compressed air in the line is released and the energy is wasted. With an outer diameter of 9 mm and a nominal diameter of 1 mm, the micro valve has a very low profile and will fit in many applications. Pneumatic port design enables a flow rate of up to 30 NI/min, which is substantially higher than any comparable solution on the market. It has complete media separation between the valve body and the solenoid and is suitable for not only air, but non-corrosive liquids and gases as well. 211 Kitty Hawk Drive |
 The New Festo HSP and HSW Part Handling and Assembly Modules Come As Packaged Solutions: Assembled, Tested, and Ready To GoThe HSP and HWS handling modules are well suited for systems ranging from simple, single station lab solutions to high speed, high volume work cells. HAUPPAUGE, NY, October 24, 2013 — The new Festo HSP and HSW pick and place and assembly modules deliver performance and significant savings for OEMs in terms of lower engineering costs and shorter installation and commissioning times. Electric and pneumatic modules are available. These handling modules are a new generation of function modules for the automatic transfer, feed, and removal of small parts in extremely confined spaces. This is achieved by means of a guided vertical and horizontal motion sequence. A backlash-free cross-guide with recirculating ball bearing elements ensures high precision and good rigidity. The combination of a semi-rotary drive and a slotted guide system produces a compact unit for a complete pick and place cycle. The electric versions come with the Festo next generation all-in-one servo motor and drive unit, the MTR-DCI-HM. This unit features a motor, integrated gearbox, power electronics, and controller in an extremely small and rugged package. Complete commissioning can be performed using simple teach-in functions. |
 The new compact, low-cost VTUG pneumatic valveterminal from Festo offers flexibility in the choice of control options, including simplified field bus connectivity and many other performance benefitsThe VTUG is designed for food, beverage, packaging, electronics, semiconductor, and light assembly industries where low cost and assured performance (high flow rate, small footprint, and long cycle life) is essential. Compact, lightweight VTUG aluminum manifold and valve housings can be mounted in cabinets, on machines, and on robotic end effectors. The VTUG valve terminal is also ideal for compact pilot valve applications when using an available dual 3/2-way function valve to accommodate from 4 to 48 solenoids.The VTUG is ideal for the machine builder that wants to standardize on one valve terminal and offer customers control options from conventional multi-pin up to fieldbus. The original VUVG design, introduced in early 2010, has since taken off as Festo’s premiere universal individual connection valve of choice. The success of this product helped influence the plug-in style VTUG. The VUVG design included the “E-Box” approach for electrical connectivity, allowing users to stock one valve body and choose from many designs to match application needs. Each E-Box uses a different electrical connector (such as Festo connectors, standard M8 connector, and other choices). Flexible design philosophy allows the user to select a desired communication preference for the VTUG valve terminal and modify it in the future.The VTUG valve terminal can be controlled through a multi-pin connector, one cable IO-link interface to a master controller, or through Festo’s new CTEU fieldbus module to DeviceNet, EtherCAT, CANopen, Profibus, and several other protocols. Multi-pin and I/O link modules are available as spare parts to easily convert existing valve terminal configurations, ensuring flexible communications. For more information, please contact us at 800-993-3786 and visit http://www.festo.com/us. |
 Clippard GV-GTV Series High Flow Poppet ValvesIncluding Cartridge Styles Available Now!Cincinnati, Ohio — Clippard’s GV series valves offer a bubble tight design with high flow rates of 38 scfm @ 50 psig; 67 scfm @ 100 psig. These compact 2-way and 3-way valves are offered in 1/4” NPT and 3/8” push-quick ports along with a cartridge mounted version.With Clippard’s versatile 15/32-32 nose thread, a large variety of buttons and valve actuators can be used with the GV stem operated valves. The GTV series are toggle valves with panel mounting capabilities. The outlet port on all GV valves can be easily positioned to any orientation for mounting convenience. • Will accept a variety of manual, air pilot, electrical or mechanical actuators • Design flexibility and fast response • Stainless steel stems and springs for long life and corrosion resistance • Corrosion-resistant series also available For more information about these control valves or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261 or visit www.clippard.com.Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue | Cincinnati, OH 45239 877-245-6247 | 513-521-4261 www.clippard.com |
 New Powerful Stainless Steel Flat Air Nozzle Saves Space, Saves Money and Resists CorrosionEXAIR’s new 1″ Stainless Steel Flat Super Air Nozzle™ produces a flat 1″ (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12″ (305mm) from the target. The unique design of this super-efficient nozzle makes it an ideal fit for both tight spaces and tight budgets, plus the Type 316 stainless steel construction makes it ideal for corrosive, high temperature, food and pharmaceutical environments. The 1″ Flat Super Air Nozzle uses EXAIR’s patented technology to maximize entrained airflow while reducing noise levels. A precise amount of air is released through the .015″ (0.38mm) air gap opening that is set with a stainless steel shim positioned between the body and removable cap. The high velocity airstream pulls in surrounding room air to produce a wide, forceful stream of laminar airflow. Air consumption is 10.5 SCFM at 80 PSIG. Force and flow may be easily adjusted by installing different shim thicknesses. The 1″ Flat Super Air Nozzle is also available in zinc aluminum alloy construction, suitable for rugged industrial applications. Applications include ejecting heavy parts and slugs, chip removal, part cleaning, drying, liquid blowoff and cooling. Price is $79. For more information contact: EXAIR Corporation |
 Teaching Grippers to SeeSCHUNK has enlarged its number of available sensors for the modular system of grippers with the new OAS sensor. When grippers such as the PGN-plus and the MPG-plus are equipped with an integrated distance and presence sensor, both modules quickly transform into seeing grippers without needing an expensive vision system. The optical system can be directly integrated into the gripping center and continuously supplies the control unit with information, such as measuring the distance of the gripper to the component. This is done during the process without any loss of time. With the OAS, PGN-plus and MPG-plus grippers can differentiate components, recognize position, pick parts from a running belt, detect wrongly gripped components, and increase the reliability of the gripping operation. The optical sensor works with infrared light at a wavelength of 850 nm. It functions at environmental temperatures between 14° and 131° F, and fulfills the standards for protection class IP65. The sensor module is multi-functional, and can also be combined with other grippers and automated modules. For example, it can be used for analog position monitoring of long-stroke grippers, by integrating it in one of the two base jaws. Combined with grippers and rotary modules, the sensor can be aligned inwards instead of outwards, which assures piston monitoring. 211 Kitty Hawk Drive |
 26-Series Sensors with AtEx and StEx for Areas with Risk of Dust and Gas Explosion.RECHNER Sensors have designed a level control sensor that is specifically suited to handling the difficult task of level control of powders and liquids in areas that are rated as hazardous because of the risk of dust or gas explosion. This sensor is ideal for replacing bulky vibro-rods, tuning forks, and paddle switches. With no moving parts and no place for material to build-up, the issue of mechanical failure is eliminated. You will never have to hit this sensor with a hammer! The design of the 26-Series sensors not only implements a rounded tip at the sensing surface that reduces material build-up on its PTFE casing, but also includes a 3-Dimensional sensing surface inside the casing. Having a 3-Dimensional sensing surface is significant because it drastically increases the active area to greater than the active area of a standard 32mm diameter cylindrical body sensor. These properties allow the sensor to ignore a large volume of material build-up and solve the problem of dealing with compressible powders and non-conductive liquids. Ideally suited for detecting: P: 1-800-544-4106 F: 905-636-0867 contact@rechner.com www.rechner.com |
 High Capacity Vacuum Lifter fom ANVER Features Hydraulic Powered TilterA new, high capacity vacuum lifter that features a hydraulic powered tilter for handling steel fabrications up to 10,000 lbs., without chains or slings, is being introduced by ANVER Corporation of Hudson, Massachusetts.ANVER’s High Capacity Vacuum Lifter and Tilter features an all-steel welded frame with two hydraulic cylinders that rotate loads from the horizontal to vertical position using fully integrated remote controls. Designed for use in production applications, with steel fabrications up to 10,000 lbs., this vacuum lifter and hydraulic tilter eliminates the need for hooks and slings.Equipped with up to eight vacuum suction pads, each measuring 19” x 25”, that have bolted rubber sealing rings with non-skid bottoms and four spring suspensions, ANVER’s High Capacity Vacuum Lifter and Tilter standard features include an electric vacuum pump, a vacuum reservoir integrated into the frame, a check valve, vacuum gages, and safety audio-visual alarms.For more information contact: Anver Corporation |
 Compact Swivel Unit from Schunk
Maximum linear vertical stroke is 20mm with adjustability up to 10mm and a maximum difference in elevation of 10mm. If the manufacturing process is interrupted and the DRL is required to stop, there are 2 programmable waiting positions that can be stopped until the interruption is cleared. Overall, the DRL is very compact, has a smooth operation and high speed, and has optional features that reduce the amount of design engineering required. Best of all, it can be combined with numerous combinations of GEMOTEC system elements increasing the number of applications it can be used for. 211 Kitty Hawk Drive
|
 Modular Gripper System Saves Time and Money in Design and ManufactureSpeed and flexibility are the main challenges for industrial packaging processes. J. Schmalz GmbH has developed a modular system for the modular design of vacuum end effectors (VEE). As a technological comparison shows, this system, as an alternative to conventional design and manufacture, can save time and money when constructing a gripper for packaging machines. Modular vacuum end effector VEE with flexible format changes According to Schmalz’s research, conventionally designed vacuum grippers are at a bottleneck in terms of design, assembly and start of operations for customer-specific packaging machines. The reasons for this are due to complex and complicated processes from the design phase through to starting operation. Machine manufacturing companies / system integrators create offers for future machine users based on technical specifications or a process description. In many cases, product samples are not yet available at this stage, or they are only prototypes and are not the final design. When the order is placed, a detailed machine concept is then drawn up and design is begun. A vacuum gripper is usually only designed after the machine concept has been fully drawn up in detail. According to Schmalz’s calculations, the design and manufacture of a gripper by a machine manufacturing company results in a design process and manufacturing period, incl. waiting times, of one to four weeks. This is also dependent on the machine manufacturing company’s range of manufacture. The waiting time for the new product can be further prolonged if gripper components are largely purchased. For complex workpieces such as flexible bags with comparatively little content, vacuum grippers also have to be optimized in order to achieve reliable results.
|
 AutomationDirect Adds NFPA Cushioned Pneumatic Air CylindersAutomationDirect’s NITRA® pneumatic product line now includes D-Series double-acting heavy-duty air cylinders ideal for use where abusive conditions exist. These pneumatic air cylinders have a 250 psi operating pressure and are interchangeable with other popular brands. New models are now available with adjustable cushions to provide end-of-stroke deceleration at both ends. All D-Series cylinders are constructed with high-quality aluminum components and a magnetic piston fitted with a PTFE wear band; all cylinders can be used along with solid state or reed switches for rod position sensing. The series includes bore sizes from 1 ½-inch to four inches and stroke lengths from one inch to 24 inches to meet a broad range of applications. Models feature flange, rear clevis and rear pivot, side, and rod clevis mounting options. Prices for NITRA D-series cushioned air cylinders start at $164. The complete line of NITRA D-series cylinders can be seen by visiting: www.automationdirect.com/air-cylinders-NFPA. To see the full line of NITRA pneumatic cylinder products, go to: www.autoamtiondirect.com/air-cylinders. |
 New ROSS Stainless Steel L-O-X Air Entry Unit Offers Corrosion Resistance and Space SavingsProducts Added to ROCKWELL AUTOMATION® Referencing Systems(TROY, MI—September 4, 2013) – In harsh manufacturing environments, corrosion damage and contaminant ingression wreak havoc on productivity. To help customers protect their end-product quality and avoid costly downtime, ROSS CONTROLS® is introducing its Stainless Steel L-O-X® Air Entry Unit which combines the industry-leading L-O-X® energy isolation valve with an integrated filter/regulator in a compact, high flow design. The products are all made with 316 stainless steel for corrosion protection in caustic environments such as the wastewater, oil, gas and pulp/paper industries. The Stainless Steel L-O-X® valve is equipped with durable fluorocarbon seals to safeguard against contaminant ingression. Like the standard L-O-X® valve, the stainless model meets applicable safety standards such as OSHA, CSA, ISO, EN, ANSI/PMMI, ANSI and NACE. The valves: • Are easily identifiable. • Provide block and bleed in a single, easy action. • Have a full-flow, threaded exhaust. • Are lockable in only in the OFF position. • And, provide a verification port for visible pressure release confirmation. The unit works synergistically in that the accompanying regulator helps provide consistent system pressure for reliable performance and the filter helps prevent airline pollution which improves productivity and part quality. This compact assembly improves efficiency and streamlines procurement, making the Stainless Steel L-O-X® Air Entry Unit a valuable addition to your system. The Stainless Steel L-O-X® Air Entry package is available with 1/4, 1/2, 3/4 and 1-inch port sizes. Additional options include stainless steel visual pressure indicator, pressure switch, and silencers. The unit provides a manual drain, but automatic drain models are also available for systems that require it. – more – – New ROSS Stainless Steel L-O-X® Air Entry Unit Offers Corrosion Resistance and Space Savings, continued –For more information on the Stainless Steel L-O-X® Air Entry package, contact your local ROSS distributor for literature and assistance or visit ROSS’ web site at www.rosscontrols.com. |
 Festo’s Small Footprint VTOC Pilot Gas Valve Manifold Ideal for Semiconductor Industry Gas Box Applications
Hauppauge, N.Y., Festo said today its high density/small footprint VTOC pilot gas valve manifold delivers the ideal solution for space-limited semiconductor gas box applications. The VTOC valve manifold can be ordered in wide range of configurations from 2 to 24 valve positions, giving OEMs the flexibility to order a manifold best suited to available gas box real estate.
|
 Record holder now also lifts higher payloads
The narrow housing and the media supply via the back panel allow a compact construction of several units next to each other. Two integrated position sensors control the vertical and horizontal movement, and ensure high repeat accuracy. Intelligent controllers control the cantilever arm and the actuators without a master control system. The required software is already integrated and can be easily enabled by Plug&Play. Up to six integrated valves provide all pneumatic tooling with air. This minimizes compressed air and energy, and ensures high cycle frequency. The energy- and time-efficient unit seamlessly fits into the module program, and can be equipped via a uniform interface with various actuators from the modular system for modular high-performance assembly. In addition to the basic version without gripper interface, the PPU-E 50 is available in six different configurations: with two, four or six air- and sensor interfaces, electric rotary units, two-fold air- and sensor connections, a vacuum interface, and on option, with a venture nozzle or an aggregate. Additionally, the Z-axis can be equipped with a spring load compensation and a parking brake. 211 Kitty Hawk Drive |
 AutomationDirect expands line of pneumatics air preparation componentsAutomationDirect’s NITRA line of pneumatics products has been extended to include more models of air preparation components (FRL), soft-start/dump valves, and distribution blocks. NITRA pneumatic air FRLs are available in 1/8 to 1-inch NPT female port sizes to support a broad range of pneumatic air supply applications. The modular design allows stand-alone applications or easy field assembly for combining the NITRA air preparation components (using assembly brackets purchased separately). AF Series air filters are available with a polycarbonate bowl or all-metal bowl with sight gauge and feature 40 micron replaceable filter elements as standard with 5 micron filter elements optional. Prices start at $11.50. AR Series pressure regulators feature a locking pressure adjustment knob and integral pressure gauge in ranges of 20-130 psi or 4-57 psi. AR series prices start at $18. The AL series mist-type lubricators feature an adjustable lubrication rate and are available with a polycarbonate bowl or all-metal bowl with sight gauge. AL series lubricators start at $13. The AFR Series combines air filters and adjustable pressure regulators, all in a single convenient unit with a polycarbonate bowl or all-metal bowl with sight gauge. AFR series prices start at $23. The ASD Series soft-start/dump valves are aluminum bodied valves available in 1/8”, 1/4”, 3/8” and 1/2” NPT female port sizes with 120VAC and 24VDC solenoids. These three-port, two-position soft-start valves allow pneumatic components to be pressurized slowly for safety and control when the valve solenoid is energized. The valves can be mounted alone with the included steel bracket or easily mount to an FRL using an optional bracket. Equipped with manual override and LED indication, start-up speed is fully adjustable and an integrated square gauge is included to monitor system pressure. ASD series prices start at $49. The ADB series distribution blocks are available in 1/8”, 1/4”, 3/8” and 1/2” NPT female port sizes and feature two through-ports and two same-size NPT branch ports. Used to divide air stream between FRL components, the modular design enables easy field assembly with NITRA FRLs. ADB series distribution blocks are priced starting at $10.50.
|
 Festo Introduces the New DSBC Pneumatic Family of Cylinders That Save Significant Design and Installation Time and Improve Overall Motion PerformanceNew Festo cushioning technology – PPS – adapts itself automatically to changing loads and speeds.HAUPPAUGE, NY– August 1, 2013 – Festo introduces the new DSBC family of ISO 15552 standard pneumatic cylinders, all of which feature the company’s unique PPS self-adjusting cushioning capability. PPS ensures that cushioning into the end position is dynamic, but gentle, and requires no manual intervention. PPS eliminates the time consuming back and forth typically required during the adjustment stage of installing pneumatic cylinders. The DSBC has the reliability and sturdiness of the popular ISO 15552 standard Festo cylinders DNC and DNCB and takes those actuators one step further with its unique self-adjusting cushioning capabilities. This self-adjusting ability ensures optimum cushioning performance at all times without the need for any manual intervention – even for changes in parameters such as friction and pressure, thus reducing wear and vibration.A wide range of configuration options are available for the following: • Seals, including chemical resistant • Scrapers, including those optimized for high dust areas, i.e. packaging • Safety, including rod clamp or mechanical end lock • Low friction or slow speed • Environments – low to high temperature conditions and high moisture, including wash down.A bumper has been integrated into the DSBC seal for both noise and vibration reduction. Sizes range from 1.25 to 5 inches (32 to 125 millimeters). “The overall capabilities, wide range of options, and the fact it meets the ISO 15552 standard makes the DSBC ideal for those OEMs seeking the benefits of standardizing on a single family of pneumatic cylinders – shorter engineering time, smaller inventory, less training, and, in the case of DSBC, improved performance,” said Frank Langro, director marketing / product management. “The Festo online product configurator makes ordering quick and efficient. In terms of the total package, no one in the pneumatics industry offers a family of cylinders comparable to the DSBC.” For more information on the innovative Festo DSBC ISO 15552 standard pneumatic cylinders with PPS cushioning, call Festo at 800-993-3786 and visit http://www.festo.com/us.
|
 New Clippard HV-HTV Toggle & Stem Valve Series Including Cartridge Styles Available Now!Cincinnati, Ohio — Available in 3-way and 4-way configurations, Clippard’s new HV-HTV valves feature the same benefits available with other Minimatic® brass valves: proven reliability, compact size, economical pricing, precision machining and more. These valves feature #10-32 inlet and outlet ports and are available as toggle or stem actuated, in addition to offering cartridge styles. Flows to 15 scfm @ 100 psig. The HV-3 Series is a fully-ported 3-way valve. This can be used as a selector valve choosing between two separate pressures or fluids going to a single output. Being fully-ported, the inverse will work as well using the valve as a diverter sending a fluid to two separate outputs. Also, the valve may be used as a Normally-Closed or Normally-Open 3-way valve. The HV-4 series is a 4-way valve that vents its exhaust ports to atmosphere and is ideal for powering simple cylinder applications. • Design flexibility and fast response For more information about these control valves or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261 or visit www.clippard.com. Clippard Instrument Laboratory, Inc. |
 Soft-start and exhaust valves from FESTO
visit http://www.festo.com/us. |
 External Mix Spray Nozzles for Pressure Fed Applications
|
 Energy Saving Vacuum Lifter Features New Rectangular Suction PadVacuum Lifter Unaffected by Power Outages A new version of their mechanical vacuum lifter which features a large rectangular suction pad for lifting heavy blocks of aluminum, steel, and plastic is being introduced by ANVER Corporation of Hudson, Massachusetts. The ANVER M250M Mechanical Lifter requires no external power because it has a self-cycling valve and piston that creates a powerful vacuum when lowered from a crane onto a load until the chain slackens fully and is raised again. Featuring a new 21” x 29” sealing ring suction pad which can be replaced in the field using a common Allen wrench, this energy-saving vacuum lifter has a 2,800 lbs. capacity for feeding cutting tables and machining centers. Unaffected by power outages, the ANVER M250M Mechanical Lifter is totally self-contained and lets users pick up loads from the top which eliminates the need for magnets, hooks, or grabs. Standard features include all-welded steel construction, a vacuum loss sensor, and an audible and visual alarm. Custom pickup head options are available to accommodate various loads. For more information contact: Anver Corporation |
 OPS+ Collision and Overload SensorThe OPS+ effectively protects the robot and end effector from being damaged during a crash. The OPS+ will allow the EOAT to deflect and comply in the event of a crash. At the same time, a mechanical switch will detect the deflection and send a signal to the robot controller, and then an E-stop can be issued. This protects the system from the damage that would have otherwise occurred without the sensor. 211 Kitty Hawk Drive |
 New Needle Gripper from SchmalzApplications Design Highlights and Benefits Intersecting needles Minimized active contact surface Double acting pneumatic cylinder Variable needle stroke Different mounting options |
 FGYS Series Magnetically Coupled Rodless Slides FROM FABCO
Bores sizes from 10mm to 40mm Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
 RU plus 20-S Sets New Standards in High Speed AssemblyThe SRU plus 20-S is SCHUNK’S new high speed addition to the SRU plus series of economical universal rotary units. Compared with other available rotary units of the same size, this high speed module can increase the number of cycles by up to 100%. With lightweight parts, the module enables rotation times starting at 0.3 s and up to 3700 cycles per hour. A load up to three times or more than that of a standard rotary unit of the same size is possible. The secret of such high performance combined with process stability is a patented shock absorbing system that combines an elastomer with an oil-damped shock absorber. Arranged in a stack, the high performance damping enables significantly shorter cycle times and a higher number of cycles, and the rotation of much higher mass inertias or loads. 211 Kitty Hawk Drive |
 Connectors Designed to Reduce Coupling RotationLinkTech’s new Patent Pending Anti-Rotational Plugs were designed for safety and convenience. These couplings allow for an aligned connection every time and minimize the risk of tangled or crossed tubing connections.LinkTech offers these couplings in their 20CB Plug and 40CB Plug Series. The new unique Acetal Pin prevents the coupling from rotating and causing an accidental disconnection. LinkTech Couplings VENTURA, CA (805) 339-0055 www.linktechcouplings.com |
 Grid Table Vacuum Block VCBL-R from SCHMALZ-Safe clamping of workpieces on CNC machining centers with grid table by vacuum (one-circuit system). -The suction cups are used universally for grid tables with common grid sizes. For this purpose, appropriate positioning angles are included in the scope of delivery. -The standard heights ensure that an all-round respectively complex 5-axis machining is possible. -High horizontal forces are absorbed by the integrated friction pads. -Different sizes of the suction areas ensure the clamping of workpieces of different shapes. -The integrated sensing valve ensures that the vacuum block can be left on the grid table even if it is not covered by a workpiece. -The assembly of the positioning angles for adaptation to the grid of the application has to be done by the user. -By installing the positioning angles the vacuum block is prepared for the present grid, which is defined by the grid, the groove width and depth. -Suitable for grid tables with grid 30×30, 40×40, 50×50 mm, the groove width 6.5 and 7.5 mm and the groove depths of 6 to 7 mm. -The vacuum block is available in two different sizes: 146×146 and 146×80 mm.Visit Schmalz |
 Clippard Minimatic 2-Way High Flow Electronic ValvesNew Models Offer Two Times the Flow of Clippard’s Standard Series Cincinnati, Ohio — Clippard Minimatic Electronic valves and manifolds provide a complete system for efficient interface with electric and electronic circuits for many applications. The standard models provide an air flow of 1.4 scfm @ 100 psig, more than twice the flow of Clippard’s trusted EC/EV/ET valve series. Optional 1.1 scfm @ 50 psig and 0.95 scfm @ 25 psig flow models are also available. The valves are precision-built 2-way Normally-Closed control valves, utilizing a unique valving principle with no sliding parts. Complete poppet travel is a mere 0.007” resulting in low power consumption and exceptionally long life. Manifold and in-line mounting are available as well as many different electrical connection styles. Oxygen Clean and Analytical versions are also available as well as FKM, EPR and Silicone seals, and diodes. Clippard Instrument Laboratory, Inc. |
 Tork introduces the Earthquake Shut-off ValveThis valve is designed to automatically shut the gas flow off in case of an earthquake within TS12884 standards. SMS Sanayi Malzemeleri Uretim ve Satisi A.S Tel : +90 216 364 34 05 |
 High Holding Forces for an Amazing Price!The Magnetic Gripper EGM from SCHUNK maintains high holding forces even in confined work spaces. It is light-weight, yet powerful enough to handle difficult applications even in situations which may require an emergency stop. It also promotes energy efficiency because electricity is only needed for magnetization and demagnetization of the unit. This system is able to lift different types of ferrous items (plates, sheets, round bars, pipes, etc.) by using a permanent electro magnetic field. The magnetic action of the product may be activated and deactivated by using a switch or digital input, which automatically alters the product’s internal magnetic state. During the operation phase, when the magnetic force is active, the product is permanently magnetized so that nothing can alter its state except for a demagnetization electrical pulse. For example: When a permanent-electro product is magnetised, it can be held this way indefinatly, even if the power is disconnected and the cables are unplugged. In order to demagnetize it, simply connect the power again and send a demagnetization pulse. This saves electricity and ensures there is no danger of parts being dropped in the event of a power failure. The EGM can handle alternating between different workpieces with minimal set-up time and without the constricting contours of gripper fingers. Due to the variable number of magnet pole pairs, optimum adaption to individual applications is ensured. 211 Kitty Hawk Drive |
 Bimba Manufacturing announced today the addition of three new series of air reservoirs to complement the existing Original Line® design.The models in this line have been equipped with stainless steel and Delrin® end caps to provide a solution for working in corrosive environments. The new stainless steel end cap models are available in 7 bore sizes and can be ordered in lengths up to 50 inches, while the Delrin® end cap models are available in 5 bore sizes and lengths up to 50 inches. Additionally, a new design that utilizes an extruded aluminum body is being brought to market for customers who wish to use the reservoir as a manifold. These new models can be configured to include additional ports along the length of the extruded body.
|
The SMT-8M-A delivers high reliability in many cylinder switch applications Festo is introducing the new SMT-8M-A solid-state cylinder switch for T-slot applications on pneumatic drives. The company’s premier new switch, like all Festo cylinder switches, is fully optimized, harmonized, and tested for Festo pneumatic drive packages, which ensures high reliability and fast set up. Features of the SMT-8M-A: The SMT-8M-A switch is loaded with new features yet the footprint of the switch has been reduced by almost 20 percent, making it one of the most compact solid-state cylinder switches in the market. The SMT-8M-A switch includes both NO/NC and PNP/NPN options in the same housing, giving flexibility to the customer in terms of switching choices and eliminating the need to stock multiple spare parts. The power supply range to 5 VDC on the lower end provides the flexibility to link the output signal directly to a TTL circuit. Features such as an additional cable clip and supplemental onboard LED aid in easy installation and commissioning in the field as does the sensor’s configurability. The sensor also ships with label-holders at each cable extremity, making it easier to document the sensor in the field. For more information about SMT-8M-A solid-state cylinder switch for T-slot applications on pneumatic drives, call Festo at 800-993-3786 and visit http://www.festo.com/us. |
“Star Core Design” Keeps Air Flowing Features and Advantages |
The standard PHL alternatively has the bearing options of a multi-tooth guidance or a profiled rail guidance, which increases the degree of efficiency of the gripper. For many applications, smaller and more cost-efficient sizes can now be selected. Thus over-sizing is avoided, the air consumption and energy is minimized, and the required space for applications is reduced. With multi-tooth jaw guidance, the PHL is particularly suitable for rough environments. The gripper can be equipped with roller bearings and profiled rail guidance, achieving a higher degree of efficiency. The carriage for the gripper fingers are equipped with ball bearings, which minimizes friction and evenly distributes forces. Since the jaw guide is sealed and permanently lubricated, the bearing capacity of the gripper increases and reduces wear. Users benefit from the reliability, precision and long service life of the gripper. The PHL is available in five sizes with piston diameters between 25-63 mm (1”-2.5”), generating gripping forces up to 3250N (740 lbf). The long stroke ranges up to 320 mm (12.5”) of total stroke and the maximum admissible finger length is 500mm (20”) which increases the flexibility in design. Every size is available as a special version with Vinton seals for high temperatures of up to 130 °C (266° F). Gripper positions can be monitored by inductive proximity switches or magnetic switches. The electric version of the PHL is the EGA and is the most flexible standard long-stroke gripper on the market. Due to the easy integration of the system’s control unit, all the features can be transferred from the current system onto the module, and offers the advantage of a direct interpolation and control of additional robot axes. |
SIL certified valve assembly offers unique two out of three protection A new redundant valve manifold (RVM) for controlling critical processes brings increased safety and efficiency to Safety Instrumented Systems and other applications where unscheduled shutdowns are unacceptable. The RVM from Norgren is one of the first to offer a two out of three (2003) configuration, meaning if one of the three pneumatic logic circuits should malfunction there are two logic circuits still operational, so critical redundancy is maintained. Norgren, a global supplier of motion and fluid control technologies, has integrated its proven Safety Integrity Level (SIL) certified valves on a single manifold to create the RVM, available in aluminum or stainless steel. The unit eliminates the duplicate piping required to install redundant valve systems. This saves space, simplifies installation and reduces potential leak paths. And, unlike piped systems, the entire valve assembly is SIL approved. The RVM also features visual indicators of valve position and output status so operators monitoring the equipment can see if they need to schedule service during routine maintenance shutdown. The RVM is also available with a manual or electrical bypass option so valves can be serviced while the assembly remains online. With integral exhaust guards to prevent particle ingress and a temperature range from -55?C to 90°C, (-67°F to 194°F) the RVM is an excellent choice for refineries, chemical plants, off-shore rigs or any process where valve malfunction cannot be tolerated. Learn more at www.norgren.com/us/energy or call 303-794-2611. |
|
Clippard Instrument Laboratory, Inc. introduces the new Analytical Series electronic valves. Available in 2-way or 3-way, normally-closed or fully ported, the valves are designed for the specific needs of the analytical industry, and for applications where cleanliness is especially important. The “A-E” Series pneumatic valves utilize a unique patented valve system that has been used and proven throughout many industries. With a low power consumption of only 0.67 watts, a response time of 5 to 10 milliseconds, and voltages of 6, 12, or 24 VDC, these new valves offer unlimited flexibility in design. Special materials, manufacturing and assembly processes make this valve perfectly-suited for applications where internal cleanliness, bubble-tight operation, and long life are imperative. For complete details on the “A-E” series electronic valves that provide safety of operation with quick response, low power consumption and long life, visit www.clippard.com/analytical or call 1-877-245-6247. Clippard Instrument Laboratory, Inc. |
 Kuri Tec® Endure™ Air Brake TubingEndure™ Air Brake Tubing retains its flexibility longer than traditional nylon tubing in harsh heat, cold and oil conditions. It’s easy to install; fits tight corners. Resists impact cracking in both high heat and sub-zero cold weather conditions; providing longer service life than traditional nylon tubing in these harsh conditions. Now available in two types; Endure™ 251 Series non-reinforced air brake tubing – Type A and the 151 Series reinforced air brake tubing – Type B. Product Web Link: Kuriyama of America, Inc. |
 VACUUM LIFTER-TILTER LOADS STRIP METAL COIL ONTO MANDRELA new vacuum lifter for handling strip metal coils which combines powered lifting and tilting with suction pads that prevent telescoping is being introduced by Anver Corporation of Hudson, Massachusetts. The Anver AT-Series Vacuum Lifter-Tilter is a compact unit which lets an operator pick up a thin strip metal coil from the top surface, keeping the center hole unobstructed, and then manipulate and load it onto a mandrel. Featuring fully adjustable and lockable power tilting, controlled by a joystick, the vacuum suction pads are configured to prevent telescoping. Eliminating damage from grippers or magnetism, the Anver AT-Series Vacuum Lifter-Tilter is powered by compressed air and uses rubber vacuum suction pads or other materials, depending upon the coil dimensions and special customer requirements. Providing a 100% duty cycle, this powered vacuum lifter-tilter includes vacuum gauges and audio-visual safety alarms. The Anver AT-Series Vacuum Lifter-Tilter is priced from $5,995.00 up, depending upon suction pad material and configuration. Price quotations are available upon request. For more information contact: Anver Corporation |
 Angular and Parallel Gripper in One UnitThe angular parallel gripper (GAP) from SCHUNK combines two basic principles of gripping. Depending on the design, the gripper has an opening angle between 30° and 180°. The parallel movement has high precision and a strong gripping force between 80 and 340 N on the last few millimeters. Workpieces with an overhang or interfering contours can be easily gripped. In contrast to conventional angular grippers, the gripping center is always maintained, and parts with various diameters can be handled and centered precisely. The worldwide unique standardized angular parallel gripper is more compact, has strong guidances, and can be closely monitored with magnetic sensors. In order to shorten the cycle times, the gripper is equipped with hydraulic shock absorbers. It can be easily monitored without any additional interfering contours. The GAP is integrated into the modular system for modular assembly automation, by which systems for high-performance automation can be quickly and easily configured. It is suitable for handling the assembly of small components, particularly for the plastic, electrical, and pharmaceutical industries. |
 AutomationDirect Adds All Stainless Steel Pneumatic Air CylindersAutomationDirect’s NITRA® pneumatic product line now includes F-Series all stainless steel air cylinders ideal for wash down applications. These non-repairable round body pneumatic air cylinders are interchangeable with other popular brands. The double-acting cylinders have a 250 psi operating pressure and are constructed with corrosion resistant 300 series stainless steel and Teflon-based rod and pivot bushings. The Urethane rod wiper keeps wash down solutions out of the cylinder. The series includes bore sizes from ¾-inch to two inches and stroke lengths from ½-inch to 18 inches to meet a broad range of applications. Models feature nose, rear pivot, and double-end mounting options and models are available with magnetic piston for position indication. Prices for NITRA F-series stainless steel air cylinders start at $66. Mounting nuts, brackets and clevises are available starting at $2. |
 Festo Introduces New Microslide DGSC – It Measures Only 8 mm wideThe new pneumatic slide is a spatial miracle of designFesto’s new microslide DGSC is a real spatial miracle. At only 8mm wide, this pneumatic slide is ideal for installation in small spaces such as in the production of electronics and small parts assembly. But the space-saving design does not impair precision. On the contrary, its positioning accuracy is just 0.01mm due to the preloaded ball bearing cage guide. Its areas of application range from handling operations in Automatic Test Equipment (ATE) systems and simultaneous loading/unloading of multiple chips or ICs in and out of the test process to attaching small screws and marking printed circuit boards with a data matrix code.And the microslide is especially efficient. For example, depending on the type and location of use no setting is required, except for advancing the end position of the work piece. This stroke compensation is made possible by a spring integrated between the piston rod and the yoke. The pneumatic slide has low breakaway torque and travels jerk-free starting at a pressure of 15 psi. Parts can thus be safely picked up and put down without getting lost. In addition, mechanical interfaces simplify the integration in the machine environment and save money as well. Various mounting and air-connection variants enable the DGSC to be easily adapted to its installation situation. The compact dimensions of the DGSC allow multiple slides to be installed next to each other when the grid dimension is narrow. For sales information, call Festo at 800-993-3786. |
 VACUUM BAG LIFTER SPEEDS BAG HANDLING OPERATIONSA vacuum tube lifter that provides an ergonomically sound alternative to manual The Anver VT-Series Bag Lifter lets an operator load and unload bags and sacks Equipped with an ergonomic handlebar with fingertip controls, vacuum pad The Anver VT-Series Bag Lifter is priced from $4,995. (list), depending upon For more information contact: Anver Corporation |
|
 Guided compact cylinders are Airwork’s top of the range.This linear actuator The standard stokes: Ø16 mm 10-20-30-40-50-75-100-125-150-175-200 t’s possible to have any length of stroke from 1 to 400mm. Air Work pneumatic equipment |
|
 CLIPPARD INTRODUCES NEW 9/16 BORE STAINLESS STEEL CYLINDER SERIESCincinnati, Ohio — Clippard Instrument Laboratory announces the new 9/16” bore stainless steel cylinder. Available in stud or universal mount, double, single or reverse acting, rotating or non-rotating rod, with standard stroke lengths up to 4”. This new cylinder comes complete with all of the standard features found on Clippard’s other stainless steel cylinder sizes, including: -Polished I.D. stainless steel tubes For complete details on this new 9/16” bore and all other Clippard products, including all options and mounting hardware, visit www.clippard.com, or call Clippard Instrument Laboratory, Inc. |
 Powerful Rotary ModuleThe new ERS rotary module from SCHUNK is the successor of the proven STM module. Compact dimensions, and a center hole for cable feed-through, are ideal preconditions for designing compact and orderly arranged high performance systems. It is multi-functional and can be used as a freely programmable rotary indexing table, as a workpiece support for laser welding machines, or as a axis of rotation for grippers in gantries. It is very flexible, and any intermediate position can be approached at a repeat accuracy of 0.02°. Even the use of the highly efficient module in existing systems and plants is a good alternative: If it replaces conventional pneumatic rotary modules, it can increase the energy efficiency of the plant and significantly broadens the range of usage. The ERS is available in three sizes with diameters 135, 170 and 210 mm. It is currently the most compact electric rotary module on the market. The height of size 170 measures 66 mm, and it achieves a convincing torque of 5 Nm. An optionally integrated pneumatic holding brake ensures that individual positions can be reliably fixed. The core piece of the ERS module is a torque motor with hollow shaft, which allows the module to be lightweight, more compact, wear-free, and is extremely reliable. In contrast to rotary modules with conventional servo motors, the module has no additional interfering contours. Moreover, elasticity due to scope and friction do not apply. Therefore, dynamic, precision, and positioning resolution are increasing. The ERS module works more quietly, precisely, and efficiently than comparable servo motors. Since there is no loss of friction, the efficiency factor achieves 80%. Due to the high compact performance, operating costs can be remarkably reduced. As regards control and regulation strategies, the user is very flexible with the ERS: beside a 560 V DC version for standard drives from Bosch or Siemens, a 48 V DC version is also available for the use with the proven SCHUNK-Motion-Controller MCS-12. The module can be used as a direct servo axis in a multi-axis system, and as a stand-alone rotary module for special tasks. |
Fabco-Air, Inc. is pleased to announce a new product line. FGYB features include: http://fabco-air.com/pdf/FGYB_R_rodless_web.pdf The catalog is also available on our literature request form, as well as our main catalog download page. Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
| RECTANGULAR VACUUM CUPS INTERNAL SEAL PROVIDES A SURE GRIP
Anver Rectangular Vacuum Cups are designed for handling long, narrow, heavy loads that cannot be lifted by conventional cups which have small contact surfaces. Rated for lifting 550 lb. horizontal loads, these rectangular cups feature NBR rubber bonded onto a machined aluminum hub and each have an internal safety seal to provide a sure grip. Available in five sizes ranging from 4” to 7” wide by 11” to 20” long, Anver Rectangular Vacuum Cups each include predrilled and tapped mounting holes and a vacuum port. Applications include lifting I-beams, girders, reinforced boards, and architectural panels. Anver Rectangular Vacuum Cups are priced from $49.95 up, depending upon size. Pricing is available upon request. For more information contact: Anver Corporation |
| Teaching Grippers to see
Moreover, the sensor measures the distance of the gripper to the component. This is done during the process without any loss of time. With the OAS, the grippers PGN-plus and MPG-plus can differentiate components, recognize its position, pick it from the running belt, unstack them, detect wrongly gripped components, and increase the reliability of the gripper during operation. The optical sensor works with infrared light at a wavelength of 850 nm. It functions at environmental temperatures between 14° F and 131° F, and fulfills the standards for protection class IP65. The sensor module is multi-functional, and can be combined with other grippers and automation modules. For example, it can be used for analog position monitoring of long-stroke grippers by integrating it in one of the two base jaws. |
 Fabco-Air, Inc. is pleased to announce an additional option for the FRL product line.Optional metal bowls and bowl guards are now available. The catalog is also available on our literature request form, as well as our main catalog download page. Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
 Universal Magnetic Sensor with programmable Switching PointMonitoring grippers during handling and assembly tasks will be much easier now that SCHUNK has introduced the MMS 22-PI1 magnetic switch. The switch uses a programmable switching point, which makes it an all-purpose sensor. Instead of using multiple variants, one sensor is used, which makes it much more flexible. Monitoring is carried out by a magnet inside of the actuator. Since the switching point can be individually adjusted, and the sensor can be completely inserted into the C-slot, no additional interfering contours occur at the actuator. Instead of adjusting the switching points mechanically, the MMS 22-PI1 can be programmed quickly. The required teach tool can be used as a wired or contact-free magnetic version. For programming purposes the sensor is inserted into the actuator and the teach-tool is held up to the sensor until the control LED illuminates. Then the teach tool is removed again and the gripper is directed into its target position. After turning on the teach tool again, this sequence is finished. Compared with conventional magnetic sensors, the operator saves up to 90 % of the set-up time. In order to increase process reliability, the release sensor point or hysteresis of the MMS 22-PI1 can be programmed on demand, too. The teach tool is put on for five seconds, the gripper is placed into the position you want, the signal to drop out at and the position is confirmed with the tool. The adjustable hysteresis allows even reliable position monitoring at very short strokes, and the gripper can differentiate workpieces of different sizes. The complete gripping process can be better evaluated and controlled. |
 New CLIPPARD PNEUMATIC BRASS SILENCING MUFFLERSClippard Instrument Laboratory, Inc. introduces the addition of a complete line of miniature pneumatic mufflers. These silencing mufflers utilize porous sintered bronze air mesh to reduce air exhaust noises from valves, cylinders and other pneumatic products for quiet system operation. Mufflers help to meet OSHA requirements by maintaining safe workplace sound levels below 90 dBA with minimum flow restriction. Available with #10-32, 1/8”, ¼”, 3/8” and ½” pipe threads. 40 micron filter. For more information about these mufflers or any of Clippard’s 5,000 other pneumatic products, call 877-245-6247 or visit www.clippard.com. Clippard Instrument Laboratory, Inc. |
 Fabco-Air – New Global “GT” Series OptionsAvailable now, the “GT” Series Global has an option for double piston rod as well as additional toolplate options. Just add a “-W” between the Body and Bore codes in the part number to include the double rod option. New toolplate configurations incorporate hole patterns to interchange directly with some of our competitors. Catalog GC-15 can be downloaded at: The catalog is also available on our literature request form, as well as our main catalog download page. Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
 Powerful angular gripper for every needSCHUNK is further expanding its program of universal gripping modules: After the parallel gripper PGN-plus, the centric gripper PZN-plus, and the small parts gripper MPG-plus, the competence leader for clamping technology and gripping systems now introduces an angular gripper, the PWG-plus. It has a high compact performance, which offers many options for universal use in virtually every industry and environment. The double oval piston drive, the one-piece, high-strength aluminum housing, and the practically wear-free lever mechanism make this gripper a compact and robust powerhouse. Depending on the application it can be equipped with or without mechanical gripping force maintenance. In addition, extensive accessories are available, including inductive sensors and magnetic switches. The angular gripper from the innovative family-owned company fits smoothly into the world’s largest line of standard grippers, which includes more than 10,000 components. Both on the finger and bottom side, it is equipped with a connecting pattern identical to that of the PGN-plus universal gripper, which allows direct combination with compensation units, valves, or quick-change jaw systems. The PWG-plus is available in three sizes for workpiece weights between 0.5 kg and 7.3 kg. Further technical specifications include gripping moments between 3.5 Nm and 143 Nm, a stroke per finger of 15°, and a travel tension angle per jaw of at least 3°. The gripper is suitable for applications in clean and slightly dirty environments, and especially for the handling of crankshafts and camshafts, as well as for gantry loading of interlinked machining centers. |
 FIPA makes things happen: innovative grippers with a high closing forcePowerful gripping, jaws that open wide: FIPA (http://www.fipa.com) is extending its range of gripper components to include a series of miniature grippers and power grippers. Both series deliver a gripping force that is about 20 percent higher and have jaws that open wider than comparable components. “With the new grippers, we can deliver flexible and highly dynamic handling solutions – especially for applications in restricted space or with grippers that have a high overall weight”, says Rainer Mehrer, FIPA President and Owner. As a result of the completely new design and the consistent application of light-weight technology, FIPA has succeeded in adapting the miniature grippers of the 80 series and the power grippers of the 140 series perfectly to their respective fields of use. The new features of the miniature gripper at a glance: The FIPA power gripper has been designed to remove large work pieces from injection-mold machines. At 380 N, it delivers around 20 % more gripping force and has a jaw opening of 15 mm, 25 % wider than comparable solutions. With up to 40 % less weight than comparable grippers from other manufacturers, it not only reduces the overall weight of complex gripper systems, but also makes shorter cycle times and lower energy consumption possible. For a secure and precise grip on injection-molded parts, the gripper jaws are self-centering. Sensors that operate over a large surface area ensure precise detection of work pieces – regardless of where the object is positioned in the gripper. The new power gripper is available in models for sensors with PNP and NPN connections. The new features of the power grippers in comparison to similar grippers at a glance: |
 Efficient handling of metal sheetsHolding force, lateral force absorption, adaptability to the workpiece, long life, environmentally friendly design and a clear reduction in costs: With the suction pads series SAXM, the German producer of vacuum technology J. Schmalz GmbH, sets new standards in sheet metal processing. The requirements of the automotive and sheet metal industries are increasing in complexity − a large part of this is due to the fact that increases in efficiency and reductions in costs are of critical importance to the competitiveness of a company. J. Schmalz GmbH, renowned producers of vacuum components, has developed a series of suction pads that differs in both design and material and is superior to other metal suction pads currently available. Suction pads of the SAXM series feature a large stroke that allows them to adjust optimally to workpieces with complex contours. The suction pad geometry provides all the features required for the highly dynamic handling of metal sheets: minimal pick-up times, high intrinsic stability while suction is applied and the absorption of extreme holding and lateral forces, especially on oily surfaces. The use of a cutting-edge and innovative material makes the suction pads extremely resistant to wear, even when subjected to ozone or aggressive drawing oils. Improved dynamic handling, decreased costs Adaptability and flexibility Long-lasting and environmentally friendly The SAXM series of suction pads made from Elastodur with a Shore hardness of 85 is available in seven sizes with suction areas of 30, 40, 50, 60, 80, 100 and 115 mm in diameter. They can be supplied with various threads already assembled or as individual parts. |
 Festo Introduces the NPQP Polypropylene Push-Pull Pneumatic Fitting SeriesHAUPPAUGE, NY, Festo is introducing a new addition to its portfolio of push-pull fittings. The new metric NPQP fitting series is focused on the most popular fitting functions and offers resistance to aggressive media due to the polypropylene material utilized. In addition, this NPQP series provides an economic alternative to St. St. fittings. Tubing connections feature sizes from 4 to 12 mm OD and threaded types feature 1/8 to ½ R threads. Product Scope When functionality and economics are important criteria in applications exposed to harsh cleaning detergents or in aggressive environments, the NPQP fitting series delivers a viable solution. These fittings are suitable to connect with flexible plastic tubing for a variety of pneumatic applications in such industries as food and beverage, packaging, bio-pharmaceutical, and process. Features For sales information, call Festo at 800-993-3786 and visit www.festo.com/us. |
 PLATE AND SHEET VACUUM LIFTER HANDLES ANY CUTTING TABLE MATERIALA heavy-duty, high capacity vacuum lifter that is designed for handling heavy ferrous and nonferrous plate and sheet from the top for loading cutting tables is available from Anver Corp. of Hudson, Massachusetts. The Anver E-Series Mill-Duty Vacuum Lifter lets one person handle all ferrous and nonferrous materials including stainless steel and aluminum clad parts; one plate or sheet at a time, from the top without magnet beams, chains, and hooks. Featuring an all-welded steel frame and fully adjustable cross beams, this rigid lifter can be integrated with an overhead crane, incorporate redundant power stations, and be set up for radio control. Custom built with capacities up to 60,000 lbs. and multiple rectangular or round suction cups and double spring suspensions, the Anver E-Series Mill-Duty Vacuum Lifter can handle steel plate up to 80 ft. x 8 ft. Standard features include a pendant control that requires two-hand operation and if there is a loss of power it has a self-contained vacuum reservoir, check valves, and a leakage sensor with audio-visual alarms. Anver E-Series Mill-Duty Vacuum Lifters are priced from $30,000.00 up, depending upon capacity. Price quotations are available upon request. For more information contact: Anver Corporation |
 Pneumatic Actuator Now Offering Infinite Number of Stroke PositionsSMC continues to make waves as an industrial innovator. The most recent offer is their Series MPC, the multi-position cylinder. Unique in the industry, the MPC is an actuator, directional control valve, controller and linear positioner all in one unit. This single unit offers an infinite number of adjustable stroke positions for under $500, positioning it as a more economical and pneumatic alternative to electric actuators. How it Works: The MPC uses a 4~20mA or 0~10VDC input signal to automatically adjust the actuator stroke. Once the MPC reaches the desired position, it is pneumatically locked until the input signal is changed. It accomplishes this by using its integrated cylinder, solenoid valve, linear sensor, and controller. The end user supplies air, the appropriate input signal and 24VDC power. Unlike more complex solutions, the MPC is easy to adjust, making it the perfect fit for on-the-fly process changes. Product Features -2 bore sizes available: 25mm & 40mm Applicable Industries -Food/Beverage |
 Secure gripping in many variantsStandard gripper series from Festo sets new standards HAUPPAUGE, NY, The parallel, three-point, radial and angle standard grippers, DHxS, from Festo are compact and offer reliability in the gripping process. Standard grippers are the first choice for cost-effective, lightweight and compact construction of handling and assembly systems. The parallel, three-point, radial and angle gripper series DHxS from Festo features optimized gripping force retention and overload protection as well as integrated sensor slots. It offers increased reliability in a range of sizes and stroke lengths. Precise A number of forward-looking features ensure reliability and The double-acting piston drive gives the standard grippers stable kinematics and maximum repetition accuracy. A wide range of mounting options in the form of threaded, fitting and centering holes make the new generation of Festo standard grippers very flexible to mount. Reliable The parallel and three-point grippers DHxS have a lightweight aluminum housing with integrated receiving hole for the pneumatic piston. The force generated by the linear motion is transferred to the The pneumatic pistons of the double-acting DHxS radial and angle grippers act on the gripper jaws, mounted on pivots in a gripper jaw guide, by means of a slotted guide system. As with parallel and three-point grippers, this means that there is no need for separate synchronization. For sales information, call Festo at 800-993-3786 and visit www.festo.com/us. |
 Fabco-Air is happy to announce a new product:The FKHW 180 Degree Opening Angular Gripper.Series FKHW features a rack and pinion design that precisely synchronizes finger motion. The fingers are heat treated for durability, and all bearings are sealed for longer operational life. Additional features include: Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
 CLIPPARD INTRODUCES NEW PILOT-OPERATEDCHECK VALVESClippard Instrument Laboratory, Inc., introduces the new JPC Series check Valves. The JPC series utilizes Clippard’s superior poppet design and provides a variety of port configurations.The JPC Series works as a standard check valve, but can be operated with an air pilot signal providing for “free flow” in the normally checked position. This new valve provides the user with a reliable method to check flow in one direction, with the ability to remotely signal a free flow through the valve. With high flow, low pressure and ease of connection, the JPC Series is an ideal check valve for many applications.For complete detail about the JPC Series, or any of Clippard’s other miniature pneumatic products, go to www.clippard.com/jpc-pol. Clippard Instrument Laboratory, Inc. |
 VACUUM LIFTER FOR CARTONSDESIGNED FOR SPECIFIC SHIPPING BOXESA vacuum tube lifter that can be modified with a wide range of factory designed pick up heads for safely handling cartons weighing up to 400 lbs. is available from Anver Corporation of Hudson, Massachusetts.The Anver VT-Series Carton lifter is powered by a remote 5 HP electric pump that runs on 3-phase power and has an adjustable handle with built-in controls. Designed to match customer requirements, this lifter provides a 100% duty cycle and can incorporate lifting heads with top and side suction cups specifically designed for the shipping box application.Allowing one person to safely handle cardboard cartons up to 400 lbs., the Anver VT-Series Carton Lifter eliminates the need for lifting, bending, and stretching because of the ergonomic handlebar with fingertip controls. This lifter is ideal for baking, chemical, food, pharmaceutical, and many other industries where products are supplied in cartons of varying sizes. The Anver VT-Series Carton lifter is priced from $4,995.00 up, depending upon construction. Price quotations are available upon request. For more information contact: Anver Corporation |
 Mechatronic Gripping Modules: Simpler, lighter and more flexibleThe conversion from pneumatic to electric gripping modules has been made much simpler, thanks to the electrically driven small parts gripper EGP from SCHUNK. Compared with other electrically driven small parts grippers on the market, it scores points with respect to its high speed and simultaneous high gripping force. A powerful roller guide ensures high efficiency and makes the gripper highly dynamic, especially for demanding Pick&Place applications. Since the EGP is based on the time-tested pneumatic small parts gripper MPG-plus, it offers a bundle of additional advantages: For example, users can completely transfer the sensor system of the MPG-plus to the EGP and can quickly convert existing systems from pneumatics to electricity. Control of the gripping module is the same as for the MPG-plus – either directly (digitally) or by means of sensor distributors (open/closed). Like the MPG-plus, the EGP also can be bolted through or bolted on either the side or bottom, for increased flexibility in designing the system. The lightweight construction in the design of the EGP is due to special high-grade aluminum which reduced excess material on the gripper housing and internal components. This enhances the dynamics and energy-efficiency of the system. Without the occurrence of significant interfering contours, two positions can be reliably monitored by means of an integrated and programmable magnetic switch, which shows whether the system is “open” or “closed.” The switch-off points can be programmed as well, which further increases the process stability. Reliable position monitoring and detection of different sized workpieces are possible even when using very short strokes. The first version is the EGP size 40. Weighing only 400 g, the gripper is designed for workpiece weights up to 675 g, can achieve a stroke of 6 mm per finger, and has a four-stage adjustable gripping force of 135 N with a closing time of <250 ms. |
 MSV CHECK VALVESAvailable in Celcon, Nylon, and PVDF with Buna, EPDM, and Viton® seals. To order: |
 SILICONE SUCTION CUPS HANDLE FROZEN TUBS AND BAKED GOODSA full line of FDA-approved, translucent silicone vacuum suction cups for Anver Food Grade Silicone Suction Cups are designed for a wide range of food handling applications from a momentary -94°F to 600°F operating range. Suitable for handling frozen food tubs and related products or for picking muffins and baked goods from ovens, these translucent silicone cups can be supplied with a wide range of fittings, spring suspensions, and mounting hardware. Featuring a variety of sizes and configurations, Anver Food Grade Silicone Suction Cups come in round sizes from 0.98” to 2.36” I.D., with bellows up to 2.72” H, and in rectangular sizes from 3.15” L x 0.87” W to 1.57” W, with bellows up to 2.72” H, and in rectangular sizes from 3.15” L x 0.87” W to 1.57” W, with bellows from 0.59” to 1.30” H. Anver Food Grade Silicone Suction Cups are priced according to size, style, and quantity. Colored metal detectable versions are also offered for de-panning food products. Samples and price quotations are available upon request. For more information contact: Anver Corporation |
 New PZH-plus Long Stroke GripperWhen components of different sizes have to be handled alternately, conventional centric grippers quickly reach their limits. In order to cover the whole spectrum of components, gripper fingers or complete grippers have to be exchanged over and over again. SCHUNK offers a highly efficient alternative: the innovative Long Stroke Gripper PZH-plus. Its patented multi-tooth guidance and its housing made of high strength aluminum assure a very compact performance. Compared to similar grippers, the PZH-plus provides a 2x higher gripping force. Optionally, the PZH-plus can be reliably monitored via magnetic field sensors or inductive sensors. The large center bore allows the installation of a camera, a feed-through of material, or the gripping of very long workpieces. The Long Stroke Centric Gripper comes in four sizes. At a weight between 1.6 and 33 kg, the maximum stroke per finger amounts between 20 and 75 mm, and the gripping forces between 250 and 3.800 N. The gripper is suitable for I.D. and O.D. gripping of workpieces weighing up to 19.3 kg. |
 Burkert presents flexible solution for integration of actuators in hygienic processesThe diverse areas of application for the Type 8640 valve terminal and the Type 8644 automation system in the food and beverage and Bio/Pharma industries are expanded by Air- LINE Quick with a stainless steel adapter plate and stainless steel push-in connectors for hygienic applications. Installation and commissioning are reduced to a minimum. You determine the installation location of the valve terminal or valve AirLINE Quick significantly reduces the number of components in the control cabinet. You need fewer pneumatic hoses and cables and you can integrate AirLINE Quick directly in the floor or wall of the control cabinet, eliminating the need for bulkhead connections on the cabinet. A unique feature of the Type 8640 and the Type 8644 automation system is the combination of the pneumatic connections, field bus interface and I/O modules directly on the floor or wall of the control cabinet, which means that the control cabinet can be generally smaller than in the past. AirLINE Quick, combined with the important integrated process safety features such as check-valves which are integrated in the exhaust air channels and the pneumatic hot-swap function (P-channel shut-off) which makes it possible to replace a valve while the system is in operation, now offers the optimal solution for pneumatic piloting devices in process technology for hygienic applications. In addition to AirLINE Quick in a stainless steel version for hygienic applications, the concept is also available for general purpose applications with an anodized aluminum adapter plate and nickel-plated brass pneumatic connections Facts and data for AirLINE Quick Burkert Fluid Control Systems |
 ADSENS Introduces the AP60 Digital Pressure GaugeProduct highlights: – 0 – 1.0 MPa (0 – 145 PSI) pressure range Adsens Technology Inc. 18310 Bedford Circle |
 NEW CLIPPARD STEPPER-CONTROLLED PROPORTIONAL VALVECincinnati, Ohio — Utilizing the industry’s most robust and powerful linear actuator, the high-flow stepper-controlled 2-way proportional valve outperforms the competition in performance and durability. The bonded elastomeric seat achieves excellent sealing ensuring smooth opening and fine control at low flow for millions of cycles. Also features 2% hysteresis, excellent linearity (2.5% of full scale), and 2 ms reaction time. A flow range of 0 to 300 slpm is standard, however this product is highly modifiable for OEM applications including alternate body materials, flow profiles, cartridge styles, manifold mounting, etc. This valve is ideal in critical applications such as gas delivery, medical, analytical, and industrial automation requiring high resolution, high flow, and low hysteresis. In addition, the unique design allows for custom flow profiles when required. Clippard also provides custom solutions for specific needs, including special configurations, manifolds, and systems. For more information about these valves or any of Clippard’s 5,000 other pneumatic products, call 513-521-4261. Clippard Instrument Laboratory, Inc. |
 Efficient Gripping of Large Strokes 2-Finger Long Stroke Gripper PHL from SCHUNKThe PHL from SCHUNK alternatively disposes of a multi-tooth guidance or a profiled rail guidance, which increases the degree of efficiency of the gripper. For many applications, smaller and more cost-efficient sizes can now be selected. Thus over-sizing is avoided, the air consumption and energy is minimized, and the required space for applications is reduced. With multi-tooth jaw guidance, the PHL is particularly suitable for rough environments. The gripper can be equipped with roller bearings and profiled rail guidance, achieving a higher degree of efficiency. The guiding carriage of the gripper fingers are equipped with ball bearings, which minimizes friction and evenly distributes forces. Since the jaw guide is sealed and permanently lubricated, the bearing capacity of the gripper increases and reduces wear. Users benefit from the reliability, precision and long service life of the gripper. The PHL is available in five sizes with piston diameters between 25-63 mm (1”-2.5”), generating gripping forces up to 3250N (740 lbf). The long stroke ranges up to 320 mm (12.5”) of total stroke and the maximum admissible finger length is 500mm (20”) which increases the flexibility in design. Every size is available as a special version with Vinton seals for high temperatures of up to 130 °C (266° F). Gripper positions can be monitored by inductive proximity switches or magnetic switches. |
 Series STP Slides….. Precise , Compact, High Loads !PHD’s Series STP Slides were designed to provide smooth, precise movement with high accuracy. With dual piston bores, the Series STP Slides provide high power in minimum space with twice the thrust of a single bore cylinder. Standard internal and external shock pads eliminate metal-to-metal contact reducing noise and end-of-travel impact forces. Optional travel adjustment available for precise slide positioning. Units are available in five sizes to fit a wide range of applications. Series STP Slides provide precision and modularity at a very low cost. Check out our online product specifications for more detailed information. STP Slides will stand up to your most demanding precision applications. |
 Monnier introduces two new families of products to augment the existing line of Monnier air preparation products.Reaffirming our position as a leader in the air preparation industry, Monniers newest products have been designed with the user in mind: convenient pressure adjustment when desired; locked in pressure when needed. The 108-1000 Regulators and the B05-1000 Integral Filter/Regulators are available in 1/4”, 3/8” and 1/2” NPT or BSPP ports and offer: Monnier |
 Rotomation A032 Rotary Actuator with Vacuum Through Shaft.This miniature actuator can rotate products held by a vacuum cup attached to its shaft. The input vacuum port on the rear remains stationary to eliminate twisting hoses. – Large hole through shaft for full flow The rugged A032 fits in the palm of your hand and can be configured in millions of different ways, including your choice of two or three position motion, flexible porting arrangements, magnetic sensors, adjustable rotation, etc. The vacuum through the rod feature is also available on certain other Rotomation rotary actuators, including the unique indexing rotary actuators.
|
 Nex Flow Frigix-X 316L Stainless Steel Panel Cooler Made Especially For Pharmaceutical And Extreme Corrosive EnvironmentsUsing Vortex Tube technology, Frigid –XTM Panel Coolers by Nex FlowTM Air Products provide a simple and inexpensive solution to heat related problems in Industrial Control Enclosures. Using only compressed air, Frigid –XTM Panel Coolers clean, cool, and keep clean electrical and electronic control panels and are virtually maintenance free. No condensate, no Freon, no filters to replace. Installs in minutes to provide years of trouble free service. Previously available in NEMA 12 (IP 52) , NEMA 3R (IP 14) , and with a patented NEMA 4/4X ( IP56 ) rating, the NEMA 4/4X-316L is specially made for pharmaceutical grade environments and to address extreme harsh corrosive environments where 303/304 stainless units are not adequate. All ratings are Underwriters Laboratories Listed ( ULC ) and CE compliant to meet US, Canadian Standards and International Standards. Nex FlowTM Frigid –XTM 316L Panel Coolers are almost 50 percent of the cost of competitive units that only use 316 and not 316L stainless steel Nex FlowTM Frigid –XTM 316L Panel Coolers units are in STOCK!. Do not be fooled by free giveaways to justify a high price. Nex-FlowTM provides the best value. ALL Nex FlowTM Frigid –XTM are constructed of Stainless Steel, with the widest selection of NEMA ratings in the industry with superior construction (NO plastic parts) and superior performance – all in stock. Nex Flow Air Products Corp. |
 Tolomatics low-cost ERD rod-style electric actuators now feature higher forces up to 500 lbs. and extended stroke lengthsWith higher forces and longer stroke lengths, the economical ERD rod-style electric actuators can replace pneumatic actuators in a wider range of applications. HAMEL, Minn. – Tolomatic has added a new size to its line of ERD rod-style electric actuators to provide higher forces and longer stroke lengths to serve more application requirements. The new ERD20 is designed with a larger diameter ball screw and a stroke length of up to 24 “With higher forces and longer stroke lengths, the affordable ERD rod-style electric actuators can now replace pneumatic actuators in a wider range of applications,” says Aaron Dietrich, electric products manager, Tolomatic. “In addition to greater force and stroke, the ERD20 is available with ball screws for extended and predictable service life.” The ERD family of rod-style electric actuators is available in body sizes that are equivalent to non-repairable pneumatic cylinder bore sizes of 5/8-inch (15.88-mm), 1-inch (25.4-mm), 1.5-inch (38.1-mm) and 2-inch (50.8-mm). Strokes are available in lengths up to 8 inches (203.2 mm) for the ERD06, 10 inches (254 mm) for the ERD10, and 24 inches (609.6 mm). for the ERD15 and 20 sizes, Forces range up to 20 Dietrich adds that the ERD actuator comes standard with a metric-threaded rod end that is compatible with a wide variety of commercially available accessories and makes the conversion from pneumatic to electric even more convenient. Like most pneumatic actuators in this performance class, electric ERD products are round bodied. They feature an oversized main bearing to accommodate high thrust loads and provide long life. The main tube and thrust tube are made of stainless steel for high rigidity and corrosion resistance, while the metric-threaded nose mount accepts a jam nut that provides convenient mounting for many applications. Mounting options include a rear trunnion mount, foot mounts or a front flange mount. The ERD actuators can accommodate six different sensing or switching choices: reed, solid-state PNP (sourcing), solid-state NPN (sinking), normally open, flying leads or quick-disconnect. The switches are activated by a standard internal magnet located inside the thrust tube. Commonly used for end-of-stroke positioning, these switches allow clamp-on installation anywhere along the actuator tube. All switches are For more than 50 years, Tolomatic has been a leading supplier of electric linear actuators, pneumatic actuators and power transmission products for factory automation. Its extensive product line also includes servo-driven high-thrust actuators, servomotors and stepper motors, stepper drives and configured linear-motion systems. Tolomatic’s electric linear and pneumatic actuators are used in a variety of industries, including the packaging, material handling, medical, food processing, automotive, semiconductor and general automation industries. For more information about the new ERD rod-style electric actuators, contact Tolomatic, 3800 County Road 116, Hamel, MN 55340. Phone: 763-478-8000 or 800-328-2174. Web site: |
 Pneumatic Actuator Approaches Zero FrictionAirpot Corp. announces the Airpel Plus, their newest line of high performance, low friction air cylinder actuators. The benefit engineers derive from the low friction levels the Airpel Plus exhibits is an enhanced ability to control ultra-precise movements, including high speeds and extremely short travel distances with clean, long-life pneumatic devices. The inert qualities and tight tolerances of the glass and graphite materials used allow engineers to develop systems that will move, hold, counterbalance or press accurately and with amazing repeatability. Applications such as counterbalancing, filament & wire tensioning, positioning and manipulating optics, liquids, or other delicate devices, and measuring weight, creep or tensile strength in the semiconductor, electronics, medical, metrology, test & measurement and, laboratory diagnostics industries will benefit from the unique capabilities offered by Airpel Plus. Airpot Corp’s time tested borosilicate glass cylinder and graphite piston technology used in the standard Airpel is at the core of the new line. However, Airpot has adapted the piston configuration from their frictionless Airpel-AB Air Bearing Actuators to create, in the Airpel Plus, a product that approaches the zero friction of the -AB at a price closer to the low cost of the Airpel. This price/performance combination expands the possible uses in applications that demand accurate force control and moderate pricing. Airpel Plus maximum friction levels are approximately 0.5% of load and their operating temperature range is -55c-150c. Airpel Plus models are currently available in 4 Each of Airpot’s four major product groups, damping, actuation, displacement and optimized pneumatic systems, offers instrument quality pneumatic devices uniquely designed and optimized for highly accurate and repeatable force control and smooth motion. Visit www.airpot.com for products and systems that exhibit superior accuracy and little or no friction. Airpot Corporation manufactures precision Air Dashpots, |
 Modular lightweight gripper with long strokeSCHUNK continues to expand its range of modular long-stroke electric grippers with the LEG 400, which can be used in the metal cutting and automotive industry, along with assembly and handling tasks. This weight-reduced, lightweight gripper is equipped with a servo motor and has Designed according to the modular principle, the LEG gripper can be equipped with a pneumatic and electric drive. The user is able to choose the servo motor as desired. Robot manufacturers can thus use their own motors and control the gripper with the same set of commands as the robot. In addition, the applicable forces can be measured and controlled with servo-electric drives. If the LEG is operated with a single The modularity of the LEG goes even further; both slides and guided slides as well as the supporting lateral cheeks and the connecting elements are available in different sizes and versions. The LEG gripper can thus be adapted economically to the corresponding task and load. Optional sensors or image processing systems make it a sensitive tool in the production, assembly, and packaging processes. A change system |
 New Series AP10 Pressure Switch from AdsensFeatures
Adsens Technology Inc. |
 Thomas New Miniature Diaphragm Brushless DC Pumps Combine Durability and PerformanceThomas recent extension of its family of Jade products features twonew diaphragm miniature brushless DC pumps. The new Jademodels, 1410 and 1420 Series, are equipped with an electronically commutated brushless DC motor. The high torque and speed rangeof the motor allows step-less variation of the performance ofpneumatic diaphragm pumps (ranging from 2.5 to 11.0 lpm) so thatthe flow versus pressure/vacuum curve is held more linear than witha standard DC motor or other BLDC motors. In addition, the Available in 12V or 24V, the motors are equipped with integrated control electronics and are powered by a 4-wire cable with male connector. The lightweight, compact and closed-construction of these pumps make them ideal for medical, analytical, lab, fuel cell and general mechanical applications. Thomas Division, gd-thomas.com, a Gardner Denver Company headquartered in Sheboygan, WI, is a world leader in the design and manufacture of precision engineered compressors and vacuum pumps. Marketing Department |
 Air Engineering And Supply To Manufacture And Distribute Previously Discontinued 1.12 Inch Bore Heavy Duty Air CylindersMinneapolis, Minnesota: Air Engineering and Supply announced today the manufacture and national distribution of the widely used 1.12 Inch bore, and up to 20 inch standard stroke with longer strokes available upon request. A leading manufacturer of this style and size cylinder recently announced that it was discontinuing the product. Air Engineering These are the popular and widely used double acting 18D and 18SD models available in both stud and universal mounts. Both are 1.12 inch bore models and feature nitrile seals rated for 180°F and 150 PSI max. Cylinders are hard-coated anodized aluminum with zinc plated nuts and lock washers. The Cylinders feature chrome plated stainless steel rods with brass pistons and have black oxide finished end covers. Designed with standard bumpers at both ends, the Cylinders have low friction U-cup seals with moly lubrication. Air Engineering and Supply has offered this style and size cylinder for over 25 years and has a wide range of customers currently using the product. Among the many applications are all types of automation including articulating arms for tool balancers, “By continuing to offer these 1.12 inch bore Heavy Duty Cylinders, we’re best serving both the replacement market and new designers with a time-proven product that is very important to many customers,” reports Dave Maurer, Air Engineering and Supply sales Air Engineering and Supply is a successful 50-year fluid power specialist representing a portfolio of 34 major manufacturers and 90 different product lines. Products range from cylinders, valves and diaphragms to tubing and structural extrusions. They include For more information, call 1-800-332-4181 Fax: 612-332-4184. |
 Multi-Power Air Press from Fabco-AirIn case you haven’t seen it before, here is a look at the Fabco-Air Multi-Power Air Press. Fabco-Air applies the unique Multi-Power® Principle to a precision framework and base, providing you with the ultimate in a Our largest Multi-Power® press is capable of producing up to 9,320 pounds of force from 100 PSI shop air. Purchase one and tool it up yourself, or give us your application details and we will help you develop a turnkey solution. Please contact Fabco-Air, Inc. customer service with any questions. Contact Information |
 THE NEW COILHOSE CEG-1 BLOW GUNThe CEC-I is economically designed to fit the natural contour of the user’s hand, maximizing comfort even during |
 VACUUM LIFTER-TILTER LIFTS AND ORIENTS COILED PRODUCTSA high-flow vacuum lifter combined with an electric hoist and pneumatic powered 90° tilter to pick up and re-orient coiled The Anver VB-Series Vacuum Lifter-Tilter is an electric hoist-based vacuum lifter that is combined with a pneumatic powered 90° Eliminating manual bending, lifting, and twisting, the Anver VB-Series Vacuum Lifter-Tilter has a remote power station that provides a high flow and is offered in 250 and 500 lbs. capacities. Suitable for a wide range of applications, this unit employs a 10” dia. foam suction pad. Anver can custom build vacuum pad attachments to match specific load requirements. The Anver VB-Series Vacuum Lifter-Tilter is priced from $4,995.00. Literature and price quotations are available upon request. For more information contact: Anver Corporation |
 Rapid Pick & Place with the new PPU-PWith up to 120 cycles per minute, the PPU-P from SCHUNK is the fastest pneumatic Pick & Place Unit on the market. Thanks to a In contrast to conventional pneumatic Pick & Place Units, the horizontal and vertical motion of the robust PPU-P unit overlap, In order to balance build-up tolerances, the horizontal stroke can be adjusted by up to 12 mm per side. Moreover, both end positions can be adjusted by 15 mm, independent from each other, and differences in height between the mounting and depositing Due to its bolt pattern, the PPU-P fits smoothly into SCHUNK’s modular assembly automation system, and numerous gripping modules and rotary actuators can be easily combined for any project at hand. About SCHUNK:
|
 New Coilhose Pneumatics 5-In-1 Automatic Safety Exhaust CouplerThe Coilhose Pneumatics new 5-In-1 Automatic Safety Exhaust Coupler is designed to remain connected to the plug until the downstream air is completely bled Coilhose Pneumatics |
 VACUUM SYSTEM SUSPENSIONS ROTATE OR REMAIN STATIONARY VIA SET-SCREWA new line of spring-loaded suspension assemblies for automation equipment that can be easily set by the user to rotate or remain stationary is being introduced by Anver Corporation of Hudson, Massachusetts. Anver SLSA Series Spring-Loaded Suspension Assemblies are designed for use in high-speed automation applications and can be set to rotate or remain Easy to install, Anver SLSA Series Spring-Loaded Suspension Assemblies are available with adjustable bulkhead fittings that mount to almost any lifting frame while a variety of tube fittings are offered to connect to the vacuum generating equipment. They are made from nickel-plated steel with stain-less steel springs in various lengths and G-3/8”, G-1/8”, and 5 mm sizes. Anver SLSA Series Spring-Loaded Suspension Assemblies are priced according to size. Pricing is available upon request. For more information contact: Anver Corporation |
 New Tolomatic IMA55 integrated servomotor actuator delivers up to 3,000 pounds of forceThe companys most powerful and compact actuator provides high force and long service life for heavy-duty industrial applications.HAMEL, Minn. – Tolomatic’s new, larger version of its integrated-motor rod-style actuator is capable of delivering up to 3,000 pounds of force with a standard ball screw. The Tolomatic IMA55 actuator is the largest and most powerful integrated-motor rod-style actuator the company makes and delivers increased dynamic performance and longer service life compared to traditional rod-style actuators. The IMA55 actuator’s unique integrated motor design is well suited for applications such as pressing, clamping, valve control, spot welding and volumetric filling.“With the addition of the IMA55 actuator to Tolomatic’s integrated-motor actuator line, we now have compact actuators for high-duty-cycle industrial applications that range in force from several hundred to 3,000 pounds,” says Aaron Dietrich, marketing manager, Tolomatic. “The IMA55 actuator, with its integrated servomotor, is also shorter for a given stroke length than other types of rod-style actuators.”The IMA55 actuator features a hollow-core rotor design that allows the nut of the screw to pass inside the rotor, creating a very compact package. This can decrease overall actuator length by as much as 18 inches compared to standard actuators due to the elimination of a separate motor, motor mount and gearbox. “In addition,” says Dietrich, “the skewed stator windings minimize the cogging of the motor and provide more efficient motion with improved force repeatability.” The Tolomatic IMA55 actuator with the standard ball-screw can exert a force of up to 3,000 pounds and move at a top speed of about 12 inches per second. The IMA55 actuator is available with a choice of motor windings optimized for 230 or 460 VAC in any incremental stroke length from 6 inches to18 inches. Built with Tolomatic’s Endurance Technology features for maximum durability and extended service life, the IMA55 actuator has a patent-pending lead-screw lubrication system that allows easy relubrication without disassembly. Tolomatic’s sizing and selection software makes selecting an IMA55 actuator easy. All orders are built to order and shipped with Tolomatic’s industry-leading five-day delivery. For more than 50 years, Tolomatic has been a leading supplier of electric linear actuators, pneumatic actuators and power transmission products for factory |
 New MultiFLOW Blowgun from CEJNCEJNs new MultiFLOW Blowgun, a powerful force in diverse applications,is the professionals must-have tool. Premium Tools for Premium Performance Customer Needs Become Design Features Meets Qualifications for a Must-Have Tool CEJN Industrial Corp. |
 PISCO EXCEPTIONALLY COMPACT VU TYPE VACUUM GENERATORS INSTALL DIRECTLY INLINE WITH VACUUM PADS AND DEVICES.Bensenville, IL – VU Type Pneumatic Vacuum Generators from PISCO USA, INC. provide convenient inline installation with vacuum pads and devices. Compatible Three Type VU models are available to meet varying pressure requirements, including high vacuum, medium flow (Model H); medium vacuum, high flow (Model L); Pisco offers these vacuum generators in both metric and inch sizes. Port sizes include 1/4” and 5/32” as well as 4mm and 6mm. Six nozzle sizes are Established in 1976, Pisco USA, Inc. is a manufacturer of high-quality pneumatic components for various industries, including factory automation, |
 VACUUM LIFTER PROTECTS HEAVY PIPE AND TUBEA compact, below-the-hook vacuum lifter that is designed for handling heavy pipe or tube from the top, in and out of containers, without using slings or hooks, is being introduced by Anver Corporation of Hudson, Massachusetts. The Anver VPFL4 Vacuum Lifter for heavy pipe and tube features nylon centering guides and oval rubber suction cups to prevent anything other than nylon or rubber from touching the load. Designed to compensate for unevenly packed loads with staggered rows, it has a 500 lb. capacity and can pick up 2, 3, or 4 pipes or tubes from the top simultaneously. Eliminating hooks, slings, and excessive handling that can cause damage, the Anver VPFL4 Vacuum Lifter for heavy pipe and tube is offered in air-powered or electric units that only need 8” of headroom. Standard features include an all-welded steel frame, adjustable handle with built-in controls, a vacuum gauge, and audio-visual vacuum leakage detector system. The Anver VPFL4 Vacuum Lifter for heavy pipe and tube is priced from $2,995.00. Price quotations are available upon request. For more information contact: Anver Corporation |
 New Series ECV Electric Cylinder from PHDNew Series ECV Electric Cylinder with the “Your Motor, Your Way” feature provides an open architecture design allowing users to specify the motor and controls of their choice. Key features include choice of inline or foldback motor mounting. Online sizing and configurator provides ease of cylinder selection and motor specification for all major motor manufactures. Precision rolled ballscrews are offered in two leads for optimizing cylinder speed or thrust performance. Shock pads on both extend and retract provide protection from extreme end of stroke impacts. Available in 3 sizes with stroke lengths up to 1000mm and a large choice of cylinder mounting accessories to optimize machine design. Advantages: High performance design while providing user the choice of motor brand and type desired. ISO/VDMA cylinder mounting interface for easy interchange. Precision rolled ball screw with fully guided ball nut and angular contact ball bearing provides long life, exceptional thrust and speed capability in addition to superb repeatability.
|
 Atlas Copco Increases Marine Starting Air Solution OfferingsAtlas Copco has broadened its range of compressors for marine uses with additional offerings that include starting, working and instrument air compressors, as well as air treatment solutions and pneumatic tools. The aluminum LT piston compressor range offers starting air from 2 kW to 15 kW. The addition of a newly developed LT KE starting air piston compressor, with a cast iron casing, offers a run from 60 m³/h (18.5 kW) to 430 m³/h (90 kW). Designed for the engine room Developed for the marine industry Atlas Copco’s marine solutions
|
 Small, Lightweight Brushless DC Compressor by ThomasThe Thomas 2220 Series brushless DC oil-less air compressor is designed for medical and other applications requiring a compact, Thomas Division, gd-thomas.com, a Gardner Denver Company headquartered in Sheboygan, WI, is a world leader in the design and manufacture of precision engineered compressors and vacuum pumps. Thomas Division |
 New Schmalz Bellows Suction Pad for Handling and separation of porous workpieces.Reliable destacking of thin, flexible chip boards, MDF or HDF sheets.
Features Schmalz Vacuum Technology Ltd. Phone: 905 569 9520 Schmalz Inc. Tel.: +1 919 7130880 |
 Hybrid Technology Powers New Integrated ConnectorsColder Products Company introduced the Mini Hybrid Connector at the MD&M East show in New York City, June 7-9. The Mini Hybrid Connector integrates air lines and electronics into a compact, single connection point for remote tools on medical devices and equipment, reducing
A video of the new connector can be viewed here: www.colder.com/hybridmovie. The standard coupling set consists of a panel mount socket and a connector with a 4’ umbilical hose containing an air tube, multiple wires and two electrical contacts. Customizable options are available. The push-pull design of the Mini Hybrid Connector is ideal for lower pressure applications that require one integrated connection point for air and electronics, such as dental tools, diagnostic equipment, surgical tools, analytical instrumentation and therapy devices. Colder Products Company, a world leader in the design and manufacture of quick disconnect couplings, will feature the Mini Hybrid Connector and other new products at MD&M East (Booth #1809) in the Jacob K. Javits Convention Center in New York City. Attendees have the opportunity to meet with Colder experts and discuss coupling and fitting options for fluid handling applications. About Colder Products Company
|
 NEW iB Series Offers Innovative Design of Linear Stepper Motor ActuatorKoganei and Humphrey introduce the iB Series, which includes the iB Move and the iB Flow. The iB Move is a Linear Stepper Motor Actuator which boasts high speed yet quiet operation for lightweight work in an affordable design. iB Move Special features include: The iB Move features a newly developed and unique shaft-type, Linear Stepper Motor Actuator. iB Move is: To learn more, visit www.humphrey-products.com Humphrey Products Company
|
 Fabco-Air is happy to announce the new FKHC High Closing Force Angular Grippers.Series FKHC features a unique design including the use of a second piston that applies additional force to the gripper jaw when pressure is applied. An adjustable needle valve allows for fine control of the jaw closing speed. Additional features include: Contact Information
|
 Sensitive gripper with integrated Web ServerWith the WSG 50, SCHUNK is now able to offer a sensitive gripper that can be controlled via Ethernet TCP/IP in addition to Profibus DP. It also has an integrated Web server for configuration and diagnostics that makes programming, putting it into operation, remote maintenance, and updating, simple. The two communication protocols and the integrated control and regulation electronics ensure maximum flexibility when integrated into higher-order systems. The gripper is equipped with an internal MicroSD card for saving programs and documents. Sensors are integrated in the gripper jaws which enable the WSG 50 gripper to measure the forces that occur during gripping. This feature makes it the ideal tool for handling sensitive samples in laboratories, pharmaceuticals, research facilities, and for measuring and testing applications. It can safely and reliably handle products that deviate significantly in terms of their sensitivity. The gripper fingers used are automatically identified and the corresponding parameters are selected. The WSG 50 gripper has a stroke of 110 mm and a variable gripping force between 1 and 120 N with a gripping speed of 850 mm/s. About SCHUNK: |
 EnKon’s Heavy Duty Lifts Solve Ergonomic Problem for Commercial Tractor CompanyWalled Lake, Michigan, EnKon Systems, Herkules Equipment Corporation’s brand name of lift systems solved a tractor manufacturer’s ergonomic lifting problem by designing two heavy duty pneumatic scissor lifts that maintain a surface flatness of +/- ½” with minimal deflection, and providing a closed lift height of 8.5” enabling the tractor to be pushed onto the lift from an 8.5” height platform. All this while still providing 25” of travel. To enable the operators to effortlessly move the massive lifts (8 foot by 8 foot) down an in-ground track, EnKon utilized an air bearing system which was incorporated into the design of the heavy duty lifts. EnKon’s custom-made lifts utilized two sets of scissor arms. Each heavy duty lift was designed to support 6000 lbs. which would accommodate any future heavier tractor model additions. And the low-profile characteristics of the EnKon lift design enable the customer to accommodate the 8.5” high platform. The customer was impressed with how stable the tractor-loaded lift was when in the raised position. And they appreciated the fact that the use of the air bearing system would turn a back-breaking burden into an easily accomplished task. The original lifting problem began when the manufacturer introduced a new model whose weight exceeded the capacity of the lifts being used. The new tractor weighed 3000 pounds, and since the existing lifts were designed to accommodate only 2000 lbs. they began to tip under the excessive weight. EnKon Systems is the brand name for Herkules Equipment Corporation’s electric, hydraulic and air powered scissor lift table systems. Herkules has been manufacturing lifting equipment close to 30 years, building a solid reputation specifically for designing & manufacturing air operated lift systems for a variety of applications. Standard and custom lift systems include; Electric Belt Drive Lifts, Electric Ball Screw Lifts, Air Lifts, Hydraulic Lifts, Lift Tables, Lift & Rotates, Lift & Tilts, Operator Lifts, Power Rotate Systems, Cart Positioners, Pallet Positioners, Post Lifts, and Lifts for Integration. For more product information, please contact EnKon Systems at 800-444-4351, or at info@herkules.us or visit our website at www.herkules.us. Check out our newest website, www.enkon.pro. |
 New from FIPA: Customized grippers that meet the highest requirements in terms of performance and speedThe customized gripper solution with maximum flexibility for all industries. A firm grip at high speed: With its customized grippers FIPA (www.fipa.com) provides anefficient, high-speed alternative to classic vacuum cups. They ensure a firm grip on sensitiveproducts, even with fast cycle times. “FIPA customized grippers are a tailor-made solution for fast manufacturing and packaging processes. As a result of its light weight the system works significantly more efficiently and uses less energy”, says Rainer Mehrer, FIPA President and What do croissants, muffins, fruit and pralines have in common? First, they are all foods. Second, they are all products that are very sensitive to pressure. And third, they are candidates for FIPA customized grippers in automated manufacturing and packaging > Customized solution: The gripper shape precisely matches the geometry of the product that is being handled. This guarantees a secure grip on sensitive products. |
 NEW CLIPPARD EVPD PROPORTIONAL VALVE DRIVERCincinnati, Ohio — Clippard Instrument Laboratory, Inc. introduces the new EVPD Proportional Valve Driver. This new product is ideal for laboratories and OEM product development, and can be customized to fit OEM applications, including control parameters This EVPD is designed for use as a plug-and-play interface between Clippard’s EVP Series Proportional Control Valves and PLC’s or other controls. The EVPD offers easy integration with existing machine controls, plus provides user adjustable parameters. With five signal inputs to choose from and three selectable valve output ranges, the EVPD is not only compact but offers tremendous flexibility with most installations. The EVPD offers enhanced performance and response time when compared to other controls and allows the engineers to focus on system control solutions instead of simple valve control. For complete information on the EVPD Proportional Valve Driver, request Technical Data Bulletin 4.11 at www.clippard.com/evp-pol, or call 1-513-521-4261. Clippard Instrument Laboratory, Inc. |
 The Nex Flow™ Heavy Duty X-Stream™ Ring Vac™ Air Operated Conveyors have Extra Powerand are Hard Anodized to Handle Abrasive ad Sticky Materials.The X-tra powerful Heavy Duty X-Stream™ Ring Vac™ from Nex Flow™ is designed for conveying materials over a longer distance both vertically and horizontally than the standard Ring Vac™ systems. Made of hard anodized aluminum ir helps prevent premature wear that could occur with either an ordinary anodized aluminum or stainless steel Ring Vac™. The Heavy Duty X-Stream™ Ring Vac™ has no moving parts, utilizing compressed air for a powerful, efficient venture action along its length in a compact design for high capacity conveying over large distances. The Heavy Duty X-Stream™ Ring Vac™ is available in a regular version whereby you clamp a hose to each end or in a threaded version where you can attach threaded piping to each end. Operation is virtually maintenance free as no moving parts. Capacity and flow is easily controlled using a pressure regulator. Nex Flow™ Air Products Corp. |
 NEW iB Series Offers Innovative Design of Digital Pneumatic Flow ControllerThe iB Flow is a digital flow controller that optimizes the cycle time settings of a cylinder or pneumatic actuator. The iB Flow is a digital pneumatic flow controller, creating an alternative to the traditional “manual” speed controller. The iB Flow features two electronic needle settings, either based on percent open, or based on cylinder extending and retracting times, both much more accurate and repeatable than the manual speed controller. Once set, the iB Flow has a safety-lock mechanism, preventing the needle from any adjustment. Plus, its “copy” function allows for setting speeds on multiple cylinders quickly and accurately, thereby reducing machine set-up time. Applications for the iB Flow: To learn more, visit www.humphrey-products.com Humphrey Products Company |
 New from FIPA: Oval vacuum cups for cylindrical productsThe right solution for any handling task: The contour of the suction lip partially grips the workpiece resulting in significantly better suction than classic oval vacuum cups. The advantage is that very small diameter workpieces can be securely gripped even at high speeds. Reliable handling solutions for pipettes, pencils, bolts, needles and the like can thus be realized efficiently. The new oval vacuum cups for cylindrical workpieces are available in oil-resistant NBR (Acrylonitrile Butadiene Rubber) or FDA-compliant, temperature-resistant silicone. FIPA Inc. |
 Miniature Precision RegulatorPneumadyne’s new Miniature Precision Regulator offers highly accurate air pressure control in a compact package; ideal for limited space applications. This precision machined, high quality regulator features an output pressure range up to 100 psi and high flow rate of 4.5 scfm. With a maximum supply pressure of 250 psi, our Precision Regulator is extremely dependable and repeatedly returns to the set pressure when turned off and on. Exceptionally tight design tolerances effectively minimize vibration allowing the regulator to remain stable under changing operating conditions. Pneumadyne, Inc. |
 Rexroth Expands Non-Contact Transfer Units to Include High-Grade Polymer Version* Addition to standard aluminum version The Non-Contact Transfer (NCT) unit from Rexroth is a unique picking device that operates on the Bernoulli principle, which applies airflow under the device to create a vacuum and lift force between the center and circumference. The line is now expanded to include a high-grade polymer version. In the last few years, the NCT transfer system has solved many customer problems associated with how to effectively handle materials that are porous, delicate, or have rough or soft surfaces. Now, in addition to the standard aluminum version, the NCT is available in PEEK (Polyetheretherketone), a high-grade polymer. The material expands the potential applications of the NCT to areas where aluminum components are not suitable. Resistance to chemicals, conventional solvents, acids, salts and oil are properties that make this new version of the NCT an ideal handling component for both the packaging and food/beverage industries. FDA- and EG-approved materials guarantee the safe use of these components, even in direct contact with food products. A low friction coefficient and high resistance to wear ensure a long service life and hygienic handling. |
 MULTILOC® METAL FASTENING FROM MULTICYLThe MultiLoc® process replaces spotwelds, hole punching, screws and rivets with a metal clinching process. A quick, clean joint of most ductile materials may be obtained using MultiLoc®. Powered by a Multicyl® air/oil intensifier, the fast advance stroke is followed by a smooth hydraulic action, ideal for the metal clinching operation. MULTICYL INC.
|
 Configured in no timeVacuum technology specialist J. Schmalz presents the first modular system for fast and easy setup of vacuum end effectors for the packaging industry Schmalz introduced the new modular system for vacuum end effectors (VEE) at the Interpack 2011 trade fair. It makes for fast and flexible gripper configurations for pick and place processes, for use in case packers, in carton and tray erecting machines, in top and side loading machines as well as in packaging machines with frequent format changes. The VEE modular system from Schmalz permits minimum configurations with one suction pad or a size of 38×38 mm and a dead weight of only 60 g. The largest configurable vacuum end effector comes with 12 suction pads at variable distances and a maximum gripper size of 300×200 mm at a weight of 800 g. Users can select suction pads from the highly specialized offer of the manufacturer depending on their requirements: Flat suction pad SGPN for handling fragile foil and blister packaging, flat suction pad SPF for handling stable cardboard boxes, bellows suction pad SPB4 for handling filled bags or flow wrap packaging.
Schmalz offers a 120 piece VEE starter kit that includes all components for setup of up to two end effectors, including suction pads and manual quick-change coupler with bayonet fastener. Schmalz Vacuum Technology Ltd. Phone: 905 569 9520 Schmalz Inc. Tel.: +1 919 7130880
|
 Introducing The New Compact Nex Flow STREAM VAC Dust Collection and Fume Extraction systemThe Nex FlowTM Stream Vac TM is an in line air conveyor that when hooked up to a A safe and improved healthy condition in the workplace improves employee morale, increases worker productivity, decreases absenteeism and even reduces insurance costs in many cases. A cleaner environment can even enhance the performance of machinery and sometimes cut
This compact Air Cleaning, Dust and Fume Extraction unit is designed to handle small and spot area applications. Portable, low cost with Nex Flow™ Air Products Corp.
|
 VACUUM TUBE LIFTER FEATURES SUCTION PADS AND A HOOKA new vacuum tube lifter that incorporates a dual function pick-up head that provides vacuum lifting for boxes and a hook for handling pails and similar loads is being introduced by Anver Corp. of Hudson, Massachusetts. The Anver VT-Series Dual Function tube lifter provides a versatile lifting solution by having two vacuum suction pads for lifting boxes and a compact hook for attaching pails and similar loads. Incorporating a new ergonomic curved handle and built in up/down controls that adjust to the user’s hand strength, this lifter is ideal for various loading and unloading operations. Easy to maneuver, the Anver VT-Series Dual Function tube lifter swivels a full 360 degrees under vacuum and provides a 100% continuous duty cycle. Available in air- or electric powered models, a vacuum gauge and rugged wire-reinforced tube with a protective cover are standard, and a quick-connect coupling accommodates a wide selection of vacuum suction pads. The Anver VT-Series Dual Function tube lifter is priced from $2,995.00, depending upon vacuum pads. Price quotations are available upon request. For more information contact: Anver Corporation |
