seltecuae
Forum Replies Created
- AuthorPosts
adminParticipantI’m Malaysian N live in Kuala Lumpur. Beside USA, Can u tell me the place or other web site……..
adminParticipantTry his address: 15F, No 9, Lane 12, Fu-Teh 1 Rd., Shichih City, Taipei County, 22151, Taiwan TEL: (886) 2 2692 3150 FAX: (886) 2 2692 1047 email: sale.acy@msa.hinet.net
November 24, 2020 at 11:14 am in reply to: How to calculate air consumption in pneumatic systems. #20919adminParticipantWhat air pressure are you working with?
adminParticipantDo you have a price list for your components.
adminParticipantYes,I have. Please send me by emal:sales4@cnquansheng.com Or add my MSN Address:xielili1984@hotmail.com Thank you in advance.
adminParticipantRegulate the pressure to the Cap (Blind) end of the cylinder to some lower figure than the pressure to the Rod end. Your problem is unequal areas that gives unequal force for extend and retract, therefore uequal time cycles. A Double Rod Cylinder would also work but would be an expensive change.
adminParticipantWithout seeing the design, gravity may be assisting your motion in one direction and resisting motion in the other direction. Your load may also be more than this plate if it is pushing product in one direction but not the other. If your actuator is a single rod end then the different area’s (or volumes) in each direction could also cause different stroke times. A pressure regulator or flow control (typically choking the exhaust side) could be used to ‘slow’ down the offending motion.
adminParticipantCurt wrote:\; Without seeing the design, gravity may be assisting your motion in one direction and resisting motion in the other direction. Your load may also be more than this plate if it is pushing product in one direction but not the other. Regardless of what the reason for the different forces, different pressures will make the actuator move quickly and smoothly. The only problem with air cylinder action comes when the load is changing while it is in motion. Go to oil in those cases.
adminParticipantContact Norgren for Herion Products http://www.norgren.com
adminParticipantItem Specification Part number Qty Solenoid coil Pe 3.. 10bars,1/4, 1.5 W 24vdc 262208830500024 00 10 pcs We need quotation as soon as possible.. regard’s radityo
adminParticipantContact Norgren for Herion Products, http://www.norgren.com
adminParticipantContact Norgren for Martonair Products http://www.norgren.com
adminParticipantIf you still need help, contact pneumatics@boschrexroth-us.com. The Rexroth Mecman name has now changed to Bosch Rexroth.
adminParticipantWhat are the part numbers?
November 25, 2020 at 9:51 am in reply to: High speed ( less then 1 millisec) valves for grain sorting #20933adminParticipantPls. contact MAC valves distributor. There are 2 distributors in India. You can locate them at http://www.macvalves.com. Regards
- AuthorPosts
