[admin]

Does someone knows YPC company. They are a solenoid valve manufacturer from Japan or Korea.
Recently i found their valves at some german company (magnetventile.pneumatig.com).
They look good, but does any one know this company? Is quality good?

Thanking You
Regards
Luke

[admin]

We require (five only) valve piston seal kits for pneumax valve # 878/-3.5.3.9.172
We are located in Winnipeg, Manitoba, Canada.
2344 Henderson Hwy., R2E 0B9
We will pay air freight. Required immediately.

[admin]

We have two, two stage air compressors that are connected in parallel to a storage tank to control the pneumatics of the building. The compressor closest to the tank had to be rebuilt with pistons and rings. After rebuilding the relief valve on that compressor pops every time we turn it on. The other pump works fine. The lines were inspeced and are clear of blockage. We have also found that there seems to be a lot of liquid in the line. At first we repiped the discharge line so that moisture from the first pump doesn't collect in the discharge of the rebuilt pump. This has not solve the problem.. Any suggestions??

[admin]

hi, im looking to design a simple automation system using pneumatic cylinders to construct the frame a small wooden box, consisting of 4 pices. 115mm by 45mm. any ideas?

[admin]

hi
i'm a mechatronic student and i'm current working on a
mini project in which i will have to use a single acting pneumatic cylinder which has an extension length (rod) of 300mm.i'll need to have all the technical data, also the price so as to make a cost evaluation. so i'll greatful if someone could help me.
thank you.

[admin]

I want to establish the compressor capacity and quantity. Can anybody help me. My end use air quantity is 40 Nm3/Min for 20 minutes in every 1.5 hour. What would be the compressor capacity in cfm and air vessel volume. Kindly help me.

[admin]

WE ARE PLEASED TO INTRODUCE OURSELVES AS AN ENGINEERING ORIENTED ORGANIZATION AND ONE OF THE LEADING IMPORTERS OF FLUIDPOWER (HYDRAULIC, PNEUMATIC & ELECTRONIC) COMPONENTS AND IMPORT DIRECTLY FROM OUR PRINCIPALS OF REPUTE THE WORLD OVER, AS THEIR RELIABLE SOLE AGENTS AND DISTRIBUTORS FOR THE ENTIRE TERRITORY OF PAKISTAN. A LIST OF OUR PRINCIPALS AND THEIR QUALITY PRODUCTS IS ENCLOSED FOR YOUR STUDY, RECORD AND FOR REFERENCE.

OUR HEAD OFFICE IS SITUATED IN KARACHI AND BRANCHES AT LAHORE, RAWALPINDI, MULTAN AND FAISALABAD WHICH ARE FULLY EQUIPPED WITH EXPERIENCED AND QUALIFIED ENGINEERS AND SUFFICIENT STOCK OF ALMOST ALL THE COMPONENTS TO MEET EMERGENCIES SHOULD THEY ARISE BESIDES OFFERING TOTAL SOLUTION TO SOLVE ALL THEIR TECHNICAL PROBLEMS TO THEIR ENTIRE SATISFACTION.
GIVE US A CHANCE TO PROVIDE YOU WITH QUALITY, LONG LASTING, ECONOMICAL FLUIDPOWER PRODUCTS AND TO SERVE YOU BETTER.

[admin]

Switch Air Cylinder

CDG1BA25-135

MAX PRESS 9.9kg/cm2 PSI

looking for above brand

Thanks:-)

[admin]

Can anyone tell me what the maximum airflow through a 1" sched 40 pipe is if the input is 80psi? I'm not looking for the recommended pipe size to flow a certain amount, but what is actually flowing through the pipe at 80psi (given that the air source is capable of flowing more than the pipe).

[admin]

Dear sirs,
since I am looking for the product of shock absorber " KAYABA " model: KBM 10-50-14C
KBM 10-20-8C
KBM 10-30-15C
KBM 10-50-13C
KBM 10-30-16C
KBM 11-30-16c
Please kindly send me your quoted price,Lead time and catalogue available.
PS the destination is in BANGKOK THAILAND.

[admin]

I am looking for Eletrovalve 2/2 nc with Fluid Brand

[admin]

What Design considerations are necessary when designing a machine for use in an explosion proof area. Is it better to design using Pneumatic Logic or use a plc in an explosion proof enclosure.

[admin]

Dear Sir,

I am from CHLED (China).we specialized in pneumatic&hydraulic manufacturing.At the present we are looking for Pneumatic&Hydraulic cylinder distributor.And OEM and Customed cylinder are welcome.I look forward to your early reply.

Best regards,
Jimmy Huang
——————————————————————————
ZHEJIANG LEIERDA PNEUMATIC LIQUID PRESSURE CO.,LTD
Factory: Daxin Industrial Zone,Liushi
TEL:0086-577-61802771 FAX:0086-577-61800788
Sales Centre:No.65-67 Chezhan Road, Liushi, Wenzhou, Zhejiang, P.R.China325604
TEL:0086-577-62775676 FAX:0086-577-62771676
http://www.chled.cn
E-mail: chled@chled.cn jimmyhuang2008@hotmail.com jimmyhuang@chled.cn
———————————————————————-

[admin]

Dear all, I am looking for a reasonable price pneumatic rotary actuators (rack & pinion type, similar to alphair or sirca), If anyone know about others brand or maker please let me know or email to me.

[admin]

I am looking for a source for sti-bergamo pneumatic actuators or air controlers.

[Author]

Posts