[admin]

I am looking for a suitable job accprding my Qualification & Experience. I have done my Graduation (Bachelor of Arts) from Punjab University, Pakistan.Regards,Tahir Mahmood

[admin]

YES : 1 Nm3/min is equal to 35.28 scfmAlso 1 Nl/min = 0.001 m3/min

[admin]

Try FAS at, http://www.fas.ch

[admin]

I have some old Martin air cylinders with these labels layed out like so …RM 8063BSPA-122061600 strokeRM/8080B200mm strokeRM/802025 or 20mm strokeWithout contacting Norgren has anybody willing to help me out with obtaining bores and any other

[admin]

An impact wrench is working mechanically and is mainly used simply to close or open a screw. An impulse tool uses a medium (oil). Therefore the impulse tool is hammering smoother" and the tolerances are less (+-30% for impact

[admin]

Looking for a position in pneumatics after 14 years with IMI Norgren. I spent 2001-1002 with Norgren Canada and with all your help hope to return to Canada.I have extensive experience in engineering, pneumatics and automation.Having progressed f

[admin]

RM/8063/B/1600 SPA-12206 63mm Bore x 1600 stroke This is a very long stroke normal max stroke 10x bore.RM/8080/b/200 80mm Bore x 200 Stroke.All to ISO 6431RM/8020/20 20mm Bore x 20mm Stroke ISO Roundline ISO 6432.Hope this will help?Ian Ex Norgre

[admin]

I am looking for a bosch hydraulic proportioanl valve replacement either new or rebuil unit ,can anyone help and guide me to the company where specialise in this (Any part of the world ) Model : 0811404955 + 1834484252+1834484245regards

[admin]

I have visio 2000. does anybody know where I can find the add-in for drawing up schemeatics using visio?

[admin]

First thanks for looking anyway I was wondering if anyone may still have any old style" Legris push fittings

[admin]

Parker Instrumentation´s C-series would do the job. All 316 stainless steel with various cracking pressures and seals in different material.

[admin]

Hi,I am going to use several pneumatic clamps on a project to hold down a workpiece. For operator safety the clamps can not move if the machine is in E-Stop. I will remove power from the valves when in E-stop. Once in E-Stop, the solenoids will

[admin]

I don'tknow how to increase the stroke on your air hammer, but I was wondering what would happen if you attached your shop compressor to the air inlet of your master cylinder? Would more air forced into your master cylinder result in more powerful

[admin]

Mr James Harbison could yu direct me to your company's website, so that i can look through your products and match one for my application.RegardsDinesh Bansal

[admin]

I need some information about the alarm HI MTR CURRENT for a YORK Chiller(YEAJ 66MT8-46PA

[Author]

Posts