seltecuae
Forum Replies Created
- AuthorPosts
adminParticipantThank you both for your suggestions. My team made several trial runs using different techniques and equipment. We found that by installing a micro swith the valve would shift at exactly the right time.We have to do another project using some mor
adminParticipantVisit these 2 sites. http://www.applerubber.comwww.parker.comBoth are excellent resources.
adminParticipantIf I remember correctly, the rail industry uses these terms throughout their specifications. Again, if I remember correctly, the static pressure is pressure in the system and residual is left in the lines after exhaust. The way a brake system wo
adminParticipantThe (very) old Westinghouse air brakes used a triple valve. When they worked they worked great when they did not they were unsafe at any speed.Newton
adminParticipantTry Ingersoll-Rand.
adminParticipantAtlas Copco can help you.www.atlascopco.comRegards.
adminParticipantWe have air motors.
adminParticipantwhat is basic working principles of vane motor explain with neat figures, THANK YOU!
adminParticipantworking in Ingersoll Rand India
adminParticipantTry Colder Products Company. They make a line of disposables.
adminParticipantWe just found some:http://www.shipstore.com/SS/HTML/SEV/SEVTVL.html
adminParticipantThat seems VERY expensive. It seems they should be under .05 per piece. How many do you nee
adminParticipantThat seems VERY expensive. It seems they should be under .05 per piece. How many do you nee
adminParticipantPilot assisted valves usually require a pressure greater than 20 psi depending on the valve. This is based on the return spring. Direct operating is the only way to go.
adminParticipantContact Versa Valve. They have air operated valves that use a diaphragm actuator for very low pilot signals as you are asking about.www.versa-valves.comRegards.
- AuthorPosts
