precision regulators

ANVER

Home | Pneumatics Online Forums precision regulators

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #20352
    admin
    Participant

    Looking for a single analog voltage (0-5 VDC preferred) controlled regulator that will allow a span of 0.03 bar to 2 bar control. This is for a couple of leak test applcations, so high precision, linearity, and repeatability are essential

    #21770
    admin
    Participant

    There are several names in proportional pressure controllers. They can also be called I/P (input to pressure) converters. Basically, all of them are 3 way valves. Here are the big names:Bellofram: voice coil designProportionAir: 2 valves design

    #21771
    admin
    Participant

    (I to P) I think is current to pneumatic.As in 4 to 20 ma. to 3 to 15 psi or other ranges.Newton

    #21772
    admin
    Participant

    Steve, Numatics manufactures an Electronic proportional regulator that may fit your description. There is some information at this address: http://www.raffluidpower.com/product2.htmIf you need any other information, please email me and I can help

    #21773
    admin
    Participant

    Pneutronics has a new electronic pressure controller EPC that uses a proportional valves and has no dead band like found in EPC’s that use 3 way valves. and has accurace’s down to .05 inches of mercury. http://www.pneutronics,com

    #21774
    admin
    Participant

    Tescom

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.